Crown

Filter
View
Showing 1 - 16 of 48 Items
$989.00
Quick View {"id":2843141275748,"title":"Crown XLC2800 Two-channel, 800W @ 4 Ohms Power Amplifier","handle":"nxlc2800-0-us","description":"\u003cb\u003eCrown XLC2800 Two-channel, 800W @ 4 Ohms Power Amplifier\u003c\/b\u003e\u003cbr\u003eAvailable in two models, the XLC2500 and XLC2800 incorporate Crown’s proprietary DriveCore™ Technology, which significantly reduces the amplifiers’ size, while yielding much more energy efficient operation – without sacrificing performance. Compact, powerful and cost-effective, the XLC Series provides ease of installation, outstanding sound quality and the unwavering reliability inherent in every Crown product. These amplifiers are powerful, affordable options for both the cinema and install markets.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eSome important features for cinema applications:\u003c\/b\u003e\u003cbr\u003e- Two models of 500W (XLC2500) and 800W (XLC2800) per channel at 4-ohms\u003cbr\u003e- XLC Amplifiers are compatible with CXM2000 for monitor, fault detection and crossover functions\u003cbr\u003e- XLC Amplifiers are compatible with Crown Monitor System DSi-8M for monitor function\u003cbr\u003e- Power for 2-ohm, 4-ohm and 8-ohm outputs, supporting stereo and bridge outputs\u003cbr\u003e- Support parallel connection of cinema surround speaker\u003cbr\u003e- Indicators provide accurate diagnostics: Power, Signal, Clip and Fault\u003cbr\u003e- Volume control on rear panel of amplifiers\u003cbr\u003e- High performance, light weight\u003cbr\u003e- DriveCore based amplifier – weighs less than 14lbs (6 kgs)\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSome important features for install applications:\u003c\/b\u003e\u003cbr\u003e- Minimal front panel control; block connectors and controls on back of amplifiers\u003cbr\u003e- High performance lightweight DriveCore based amplifier for audiophile quality and extremely high reliability\u003cbr\u003e- Configurable input operation for stereo and parallel and bridge modes\u003cbr\u003e- Configurable output operation for stereo and bridge modes\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Line Voltage and Frequency Configurations Available: (+\/- 10%) 100VAC 50\/60 Hz, 110VAC 60 Hz, 220 and 230~240VAC 50 Hz\u003cbr\u003eVoltage Gain: 42\u003cbr\u003eSensitivity: 1.4V (for full rated power at 4 ohms)\u003cbr\u003eSignal to Noise Ratio (ref. rated power, 8 ohms, 1 kHz): \u0026gt; 103 dB\u003cbr\u003eTHD: \u0026lt;0.5%\u003cbr\u003eDamping Factor (8 ohms, 10 Hz to 400 Hz): \u0026gt;200\u003cbr\u003eIntermodulation Distortion (from full rated output to -30 dB): \u0026lt;0.3%\u003cbr\u003eFrequency Response (at 1W, 20 Hz - 20 kHz): -1 dB\u003cbr\u003eCrosstalk: \u0026gt;85 dB (below rated 8 ohms power, at 1 kHz); \u0026gt;55 dB (below rated 8 ohms power, at 20 kHz)\u003cbr\u003eInput Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced\u003cbr\u003eLoad Impedance: 2~8 ohms per channel in Stereo; 4~8 ohms in Bridge\u003cbr\u003eDimensions: 19\" x 3.5\" x 10.4\" (48.3cm x 8.9cm x 26.4cm)\u003cbr\u003eWeight: 10.4 lbs (4.72 kg)\u003cbr\u003eShipping Weight: 13.2 lbs (6 kg)\u003cbr\u003eIEC Power Connector: 15A\u003cbr\u003e","published_at":"2019-02-19T02:27:47-06:00","created_at":"2019-02-19T02:27:48-06:00","vendor":"Crown","type":"home audio","tags":["home-audio"],"price":98900,"price_min":98900,"price_max":98900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367155708004,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NXLC2800-0-US","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Crown XLC2800 Two-channel, 800W @ 4 Ohms Power Amplifier","public_title":null,"options":["Default Title"],"price":98900,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/haw2zjc6bdtbmcwcfdjp.jpg?v=1550564869"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/haw2zjc6bdtbmcwcfdjp.jpg?v=1550564869","options":["Title"],"content":"\u003cb\u003eCrown XLC2800 Two-channel, 800W @ 4 Ohms Power Amplifier\u003c\/b\u003e\u003cbr\u003eAvailable in two models, the XLC2500 and XLC2800 incorporate Crown’s proprietary DriveCore™ Technology, which significantly reduces the amplifiers’ size, while yielding much more energy efficient operation – without sacrificing performance. Compact, powerful and cost-effective, the XLC Series provides ease of installation, outstanding sound quality and the unwavering reliability inherent in every Crown product. These amplifiers are powerful, affordable options for both the cinema and install markets.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eSome important features for cinema applications:\u003c\/b\u003e\u003cbr\u003e- Two models of 500W (XLC2500) and 800W (XLC2800) per channel at 4-ohms\u003cbr\u003e- XLC Amplifiers are compatible with CXM2000 for monitor, fault detection and crossover functions\u003cbr\u003e- XLC Amplifiers are compatible with Crown Monitor System DSi-8M for monitor function\u003cbr\u003e- Power for 2-ohm, 4-ohm and 8-ohm outputs, supporting stereo and bridge outputs\u003cbr\u003e- Support parallel connection of cinema surround speaker\u003cbr\u003e- Indicators provide accurate diagnostics: Power, Signal, Clip and Fault\u003cbr\u003e- Volume control on rear panel of amplifiers\u003cbr\u003e- High performance, light weight\u003cbr\u003e- DriveCore based amplifier – weighs less than 14lbs (6 kgs)\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSome important features for install applications:\u003c\/b\u003e\u003cbr\u003e- Minimal front panel control; block connectors and controls on back of amplifiers\u003cbr\u003e- High performance lightweight DriveCore based amplifier for audiophile quality and extremely high reliability\u003cbr\u003e- Configurable input operation for stereo and parallel and bridge modes\u003cbr\u003e- Configurable output operation for stereo and bridge modes\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Line Voltage and Frequency Configurations Available: (+\/- 10%) 100VAC 50\/60 Hz, 110VAC 60 Hz, 220 and 230~240VAC 50 Hz\u003cbr\u003eVoltage Gain: 42\u003cbr\u003eSensitivity: 1.4V (for full rated power at 4 ohms)\u003cbr\u003eSignal to Noise Ratio (ref. rated power, 8 ohms, 1 kHz): \u0026gt; 103 dB\u003cbr\u003eTHD: \u0026lt;0.5%\u003cbr\u003eDamping Factor (8 ohms, 10 Hz to 400 Hz): \u0026gt;200\u003cbr\u003eIntermodulation Distortion (from full rated output to -30 dB): \u0026lt;0.3%\u003cbr\u003eFrequency Response (at 1W, 20 Hz - 20 kHz): -1 dB\u003cbr\u003eCrosstalk: \u0026gt;85 dB (below rated 8 ohms power, at 1 kHz); \u0026gt;55 dB (below rated 8 ohms power, at 20 kHz)\u003cbr\u003eInput Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced\u003cbr\u003eLoad Impedance: 2~8 ohms per channel in Stereo; 4~8 ohms in Bridge\u003cbr\u003eDimensions: 19\" x 3.5\" x 10.4\" (48.3cm x 8.9cm x 26.4cm)\u003cbr\u003eWeight: 10.4 lbs (4.72 kg)\u003cbr\u003eShipping Weight: 13.2 lbs (6 kg)\u003cbr\u003eIEC Power Connector: 15A\u003cbr\u003e"}
$559.00
Quick View {"id":2843141111908,"title":"Crown XTi1002 Two-channel, 500W Power Amplifier","handle":"nxti1002-u-us","description":"\u003cb\u003eCrown XTi1002 Two-channel, 500W Power Amplifier\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThere's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003e- Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release\u003cbr\u003e- Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning\u003cbr\u003e- 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application\u003cbr\u003e- New system monitoring provides software visibility of AC line voltage and power supply temperature\u003cbr\u003e- Integrated cast-aluminum handles for easy handling and enhanced durability\u003cbr\u003e- Locking power cord clip provides a secure connection between the amplifier and power cord\u003cbr\u003e- Updated HiQnet System Architect™ control software\u003cbr\u003e- Increased number of presets to a total of 50; 49 of which are user definable\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eChannels: 2\u003cbr\u003eSensitivity: 1.4V\u003cbr\u003eRated Power Output (per channel): 700W 2Ω, 500W 4Ω, 275W 8Ω\u003cbr\u003eSignal to Noise Ratio (below rated 1 kHz power at 8 ohms): 100 dB (A-weighted)\u003cbr\u003eTHD: \u0026lt; 0.5%\u003cbr\u003eFrequency Response (at 1W, 20 Hz - 20 kHz): + 0 dB, -1 dB\u003cbr\u003eCrosstalk (below rated power) 20 Hz to 1 kHz: \u0026gt;70 dB\u003cbr\u003eDimensions: 3.5\" x 19\" x 12.25\"\u003cbr\u003eWeight: 18.5 lbs (8.4 kg)\u003cbr\u003eShipping Weight: 21.5 lbs (9.8 kg)\u003cbr\u003eIEC Power Connector: 15A\u003cbr\u003e","published_at":"2019-02-19T02:27:46-06:00","created_at":"2019-02-19T02:27:47-06:00","vendor":"Crown","type":"pro audio","tags":["pro-audio"],"price":55900,"price_min":55900,"price_max":55900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367153938532,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NXTI1002-U-US","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Crown XTi1002 Two-channel, 500W Power Amplifier","public_title":null,"options":["Default Title"],"price":55900,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"8.71E+11"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/jxqsouqvwcvgr50c1oub.jpg?v=1550564867"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/jxqsouqvwcvgr50c1oub.jpg?v=1550564867","options":["Title"],"content":"\u003cb\u003eCrown XTi1002 Two-channel, 500W Power Amplifier\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThere's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003e- Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release\u003cbr\u003e- Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning\u003cbr\u003e- 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application\u003cbr\u003e- New system monitoring provides software visibility of AC line voltage and power supply temperature\u003cbr\u003e- Integrated cast-aluminum handles for easy handling and enhanced durability\u003cbr\u003e- Locking power cord clip provides a secure connection between the amplifier and power cord\u003cbr\u003e- Updated HiQnet System Architect™ control software\u003cbr\u003e- Increased number of presets to a total of 50; 49 of which are user definable\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eChannels: 2\u003cbr\u003eSensitivity: 1.4V\u003cbr\u003eRated Power Output (per channel): 700W 2Ω, 500W 4Ω, 275W 8Ω\u003cbr\u003eSignal to Noise Ratio (below rated 1 kHz power at 8 ohms): 100 dB (A-weighted)\u003cbr\u003eTHD: \u0026lt; 0.5%\u003cbr\u003eFrequency Response (at 1W, 20 Hz - 20 kHz): + 0 dB, -1 dB\u003cbr\u003eCrosstalk (below rated power) 20 Hz to 1 kHz: \u0026gt;70 dB\u003cbr\u003eDimensions: 3.5\" x 19\" x 12.25\"\u003cbr\u003eWeight: 18.5 lbs (8.4 kg)\u003cbr\u003eShipping Weight: 21.5 lbs (9.8 kg)\u003cbr\u003eIEC Power Connector: 15A\u003cbr\u003e"}
$719.00
Quick View {"id":2843140980836,"title":"Crown XFMR8 Eight-channel Transformer","handle":"nxfmr8ch","description":"\u003cb\u003eCrown XFMR8 Eight-channel Transformer\u003c\/b\u003e\u003cbr\u003eThe Crown XFMR-4 and XFMR-8 are rack-mountable transformers to provide impedance matching between amplifier outputs and “constant voltage” loudspeakers. This unit allows amplifiers without direct 70Vrms or 100Vrms output capability to drive distributed speaker systems designed to operate at those voltages.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003e• Transformers provide four and eight channels of impedance matching for constant voltage operation\u003cbr\u003e• Provides 70Vrms and 100Vrms output when used only with the ComTech DriveCore™ Series of amplifiers\u003cbr\u003e• Allows amplifiers without direct constant voltage capability to be easily integrated into distributed systems\u003cbr\u003e• “Jumper” cables are provided to easily incorporate the XFMR unit with a ComTech DriveCore amplifier\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eOutput Connectors: Pluggable barrier block connectors that accept up to 14 AWG wire\u003cbr\u003eFrequency Response: +\/-1.0dB (at 70Hz to 15 kHz)\u003cbr\u003eInsertion Loss: ≤1.0 dB max (at 70VAC)\u003cbr\u003eMax Input: 32Vrms\/125W\u003cbr\u003eDimensions: 19\" x 1.72\" x 15.6\" (48.3cm x 4.4cm x 39.7cm)\u003cbr\u003eWeight: 23.6lbs (10.7kg)\u003cbr\u003e","published_at":"2019-02-19T02:27:45-06:00","created_at":"2019-02-19T02:27:46-06:00","vendor":"Crown","type":"home audio","tags":["home-audio"],"price":71900,"price_min":71900,"price_max":71900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367151906916,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NXFMR8CH","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Crown XFMR8 Eight-channel Transformer","public_title":null,"options":["Default Title"],"price":71900,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/psnlofsymrdupy8cm6pt.jpg?v=1550564866"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/psnlofsymrdupy8cm6pt.jpg?v=1550564866","options":["Title"],"content":"\u003cb\u003eCrown XFMR8 Eight-channel Transformer\u003c\/b\u003e\u003cbr\u003eThe Crown XFMR-4 and XFMR-8 are rack-mountable transformers to provide impedance matching between amplifier outputs and “constant voltage” loudspeakers. This unit allows amplifiers without direct 70Vrms or 100Vrms output capability to drive distributed speaker systems designed to operate at those voltages.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003e• Transformers provide four and eight channels of impedance matching for constant voltage operation\u003cbr\u003e• Provides 70Vrms and 100Vrms output when used only with the ComTech DriveCore™ Series of amplifiers\u003cbr\u003e• Allows amplifiers without direct constant voltage capability to be easily integrated into distributed systems\u003cbr\u003e• “Jumper” cables are provided to easily incorporate the XFMR unit with a ComTech DriveCore amplifier\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eOutput Connectors: Pluggable barrier block connectors that accept up to 14 AWG wire\u003cbr\u003eFrequency Response: +\/-1.0dB (at 70Hz to 15 kHz)\u003cbr\u003eInsertion Loss: ≤1.0 dB max (at 70VAC)\u003cbr\u003eMax Input: 32Vrms\/125W\u003cbr\u003eDimensions: 19\" x 1.72\" x 15.6\" (48.3cm x 4.4cm x 39.7cm)\u003cbr\u003eWeight: 23.6lbs (10.7kg)\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843140685924,"title":"Crown CT16S Amplifier Switcher w\/ 16 primary amplifier inputs and outputs","handle":"nct16s-u-us","description":"\u003cb\u003eCrown CT16S Amplifier Switcher\u003c\/b\u003e\u003cbr\u003eThe CT16S amplifier switcher gives users of public address systems confidence that their system is operational. Each amplifier switcher has 16 primary amplifier inputs (which connect to the amplifier outputs), 16 backup amplifier inputs (which connects to the amplifier outputs), and 16 outputs. The CT16S is capable of handling 2 Amps Continuous for up to 1000W per channel. \u003cbr\u003e\u003cbr\u003eIn the event that a failed channel is detected, the unit can switch the failed channel to an idle backup channel. Once the primary amplifier channel is back online, the unit will switch the backup channel back to the primary channel. All errors and switch operations will be reported to the management software. The CT16S hardware supports backup ratios ranging from 16:1 to 1:1; the exact ratio available is determined by the control system being used.\u003cbr\u003e\u003cbr\u003eA series of programmable GPIO’s can be used to connect the CT16S to external control devices. A total of 16 control inputs and 5 control outputs are built into the CT16S to provide enough control inputs for emergency use (for connection to local fire alarm contacts). In addition to the GPIO, an Ethernet connector is provided for additional configuration and control.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003e- Monitor up to 16 amplifier channels in real time for speaker outages and channel\/amplifier failures\u003cbr\u003e- 16 primary amplifier inputs, 16 backup amplifier inputs and 16 outputs\u003cbr\u003e- Utilize any primary to backup amplifier ratio from 16:1 to 1:1\u003cbr\u003e- 16 control inputs and 5 control outputs\u003cbr\u003e- Automatic power amplifier switching when a primary channel fails\u003cbr\u003e- Automatic power amplifier switch back when a failed primary channel is back online\u003cbr\u003e- Two status indicators for each channel: primary amplifier status indicator and backup amplifier status indicator\u003cbr\u003e- Error and switch operation reported to management software\u003cbr\u003e- Universal power supply\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Line Voltage: 100 - 240 VAC @ 50Hz or 60Hz\u003cbr\u003eDimensions: 19\" x 10\" x 3.5\" (482 mm x 256 mm x 88 mm)\u003cbr\u003eNet Weight: 10 lbs (4.5 kg)\u003cbr\u003e","published_at":"2019-02-19T02:27:44-06:00","created_at":"2019-02-19T02:27:45-06:00","vendor":"Crown","type":"pro audio","tags":["pro-audio"],"price":312900,"price_min":312900,"price_max":312900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367149613156,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NCT16S-U-US","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Crown CT16S Amplifier Switcher w\/ 16 primary amplifier inputs and outputs","public_title":null,"options":["Default Title"],"price":312900,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/gzcftkx60hdrkxiyfaed.jpg?v=1550564865"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/gzcftkx60hdrkxiyfaed.jpg?v=1550564865","options":["Title"],"content":"\u003cb\u003eCrown CT16S Amplifier Switcher\u003c\/b\u003e\u003cbr\u003eThe CT16S amplifier switcher gives users of public address systems confidence that their system is operational. Each amplifier switcher has 16 primary amplifier inputs (which connect to the amplifier outputs), 16 backup amplifier inputs (which connects to the amplifier outputs), and 16 outputs. The CT16S is capable of handling 2 Amps Continuous for up to 1000W per channel. \u003cbr\u003e\u003cbr\u003eIn the event that a failed channel is detected, the unit can switch the failed channel to an idle backup channel. Once the primary amplifier channel is back online, the unit will switch the backup channel back to the primary channel. All errors and switch operations will be reported to the management software. The CT16S hardware supports backup ratios ranging from 16:1 to 1:1; the exact ratio available is determined by the control system being used.\u003cbr\u003e\u003cbr\u003eA series of programmable GPIO’s can be used to connect the CT16S to external control devices. A total of 16 control inputs and 5 control outputs are built into the CT16S to provide enough control inputs for emergency use (for connection to local fire alarm contacts). In addition to the GPIO, an Ethernet connector is provided for additional configuration and control.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003e- Monitor up to 16 amplifier channels in real time for speaker outages and channel\/amplifier failures\u003cbr\u003e- 16 primary amplifier inputs, 16 backup amplifier inputs and 16 outputs\u003cbr\u003e- Utilize any primary to backup amplifier ratio from 16:1 to 1:1\u003cbr\u003e- 16 control inputs and 5 control outputs\u003cbr\u003e- Automatic power amplifier switching when a primary channel fails\u003cbr\u003e- Automatic power amplifier switch back when a failed primary channel is back online\u003cbr\u003e- Two status indicators for each channel: primary amplifier status indicator and backup amplifier status indicator\u003cbr\u003e- Error and switch operation reported to management software\u003cbr\u003e- Universal power supply\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Line Voltage: 100 - 240 VAC @ 50Hz or 60Hz\u003cbr\u003eDimensions: 19\" x 10\" x 3.5\" (482 mm x 256 mm x 88 mm)\u003cbr\u003eNet Weight: 10 lbs (4.5 kg)\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843140522084,"title":"Crown CDi6000 Two-channel, 2100W @ 4 Ohms, 70V\/140V Power Amplifier","handle":"ncdi6000","description":"\u003cb\u003eCrown CDi6000 Two-channel, 2100W @ 4 Ohms, 70V\/140V Power Amplifier\u003c\/b\u003e\u003cbr\u003eThe CDi Series amplifiers are professional tools designed and built for installed sound applications. The series includes four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000. All are rugged and lightweight, and offer unmatched value in their class.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003e- Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs.\u003cbr\u003e- Switch-mode universal power supply.\u003cbr\u003e- Intuitive front-panel LCD screen for quick, easy configuration.\u003cbr\u003e- Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting.\u003cbr\u003e- Up to 20 user defined DSP presets are available.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eChannels: 2\u003cbr\u003eSensitivity (for full rated power at 8 ohms): 1.4V\u003cbr\u003eRated Power Output (per channel @ 4 ohms): 2100W Stereo\u003cbr\u003eSignal to Noise Ratio (below rated 1 kHz power at 8 ohms): 103 dB (A-weighted)\u003cbr\u003eTHD: \u0026lt; 0.5%\u003cbr\u003eDamping Factor (20 Hz to 400 Hz): \u0026gt; 500\u003cbr\u003eFrequency Response (at 1W, 20 Hz - 20 kHz): + 0 dB, -1 dB\u003cbr\u003eCrosstalk (below rated power) 20 Hz to 1 kHz: \u0026gt;70 dB\u003cbr\u003eInput Impedance (nominal): 20k ohms balanced, 10k ohms unbalanced\u003cbr\u003eDimensions: 3.5\" x 19\" x 16.2\"\u003cbr\u003eWeight: 30.0 lbs\u003cbr\u003eIEC Power Connector: 15A\u003cbr\u003e","published_at":"2019-02-19T02:27:43-06:00","created_at":"2019-02-19T02:27:44-06:00","vendor":"Crown","type":"pro audio","tags":["pro-audio"],"price":369900,"price_min":369900,"price_max":369900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367148564580,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NCDI6000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Crown CDi6000 Two-channel, 2100W @ 4 Ohms, 70V\/140V Power Amplifier","public_title":null,"options":["Default Title"],"price":369900,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"8.71E+11"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/ouvksjpjjxn2rbgowhzz.jpg?v=1550564864"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/ouvksjpjjxn2rbgowhzz.jpg?v=1550564864","options":["Title"],"content":"\u003cb\u003eCrown CDi6000 Two-channel, 2100W @ 4 Ohms, 70V\/140V Power Amplifier\u003c\/b\u003e\u003cbr\u003eThe CDi Series amplifiers are professional tools designed and built for installed sound applications. The series includes four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000. All are rugged and lightweight, and offer unmatched value in their class.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003e- Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs.\u003cbr\u003e- Switch-mode universal power supply.\u003cbr\u003e- Intuitive front-panel LCD screen for quick, easy configuration.\u003cbr\u003e- Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting.\u003cbr\u003e- Up to 20 user defined DSP presets are available.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eChannels: 2\u003cbr\u003eSensitivity (for full rated power at 8 ohms): 1.4V\u003cbr\u003eRated Power Output (per channel @ 4 ohms): 2100W Stereo\u003cbr\u003eSignal to Noise Ratio (below rated 1 kHz power at 8 ohms): 103 dB (A-weighted)\u003cbr\u003eTHD: \u0026lt; 0.5%\u003cbr\u003eDamping Factor (20 Hz to 400 Hz): \u0026gt; 500\u003cbr\u003eFrequency Response (at 1W, 20 Hz - 20 kHz): + 0 dB, -1 dB\u003cbr\u003eCrosstalk (below rated power) 20 Hz to 1 kHz: \u0026gt;70 dB\u003cbr\u003eInput Impedance (nominal): 20k ohms balanced, 10k ohms unbalanced\u003cbr\u003eDimensions: 3.5\" x 19\" x 16.2\"\u003cbr\u003eWeight: 30.0 lbs\u003cbr\u003eIEC Power Connector: 15A\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843140456548,"title":"Crown DCi 8|600N Eight-channel, 600W @ 4 Ohms Power Amplifier with BLU link, 70V\/100V","handle":"dci8x600n-u-usmx","description":"\u003cb\u003eCrown DCi 8|600N Eight-channel, 600W @ 4 Ohms Power Amplifier with BLU link, 70V\/100V\u003c\/b\u003e\u003cbr\u003eThe new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eANALOG \u0026amp; DIGITAL INPUTS\u003c\/b\u003e – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.\u003cbr\u003e\u003cb\u003eNETWORK MONITORING \u0026amp; CONTROL\u003c\/b\u003e – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP\/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.\u003cbr\u003e\u003cb\u003ePROGRAMMABLE GENERAL PURPOSE INPUT\/OUTPUT PORTS\u003c\/b\u003e – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.\u003cbr\u003e\u003cb\u003eDIGITAL SIGNAL PROCESSING \u003c\/b\u003e– DSP capabilities include the following:\u003cbr\u003e - LevelMAX Limiters\u003cbr\u003e - Input\/Output EQ\u003cbr\u003e - Delay\u003cbr\u003e - Matrix Mixer\u003cbr\u003e - Speaker Line Monitoring\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eFrequency Response ( 8 Ohms, 20 Hz - 20 kHz): +\/- 0.25 dB\u003cbr\u003eBLU Link Input Signal to Noise Ratio (A-Weighted): \u0026gt; 104dB\u003cbr\u003eTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%\u003cbr\u003eVoltage Gain: 34 dB\u003cbr\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt;1000\u003cbr\u003eInput Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms\u003cbr\u003eMaximum Input Level before Compression: +20 dBu\u003cbr\u003eLoad Impedance (Stereo\/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms\u003cbr\u003eLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms\u003cbr\u003eCooling: Continuously variable speed forced air, front to back airflow\u003cbr\u003eMaximum Fan Noise (re dBA SPL @ 1M): 47\u003cbr\u003eRequired AC Mains (+\/- 10%): 100V-240V ~ 50\/60 Hz\u003cbr\u003eDimensions: 19\" x 3.5\" x 17\" (48.3cm x 8.9cm x 42.5cm)\u003cbr\u003eWeight: 30lbs (13.60kg)\u003cbr\u003eIEC Power Connector: 20A\u003cbr\u003e","published_at":"2019-02-19T02:27:42-06:00","created_at":"2019-02-19T02:27:43-06:00","vendor":"Crown","type":"home audio","tags":["home-audio"],"price":819800,"price_min":819800,"price_max":819800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367147778148,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DCI8X600N-U-USMX","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Crown DCi 8|600N Eight-channel, 600W @ 4 Ohms Power Amplifier with BLU link, 70V\/100V","public_title":null,"options":["Default Title"],"price":819800,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/afg0ktyynaa7xnm6dyjy.jpg?v=1550564863"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/afg0ktyynaa7xnm6dyjy.jpg?v=1550564863","options":["Title"],"content":"\u003cb\u003eCrown DCi 8|600N Eight-channel, 600W @ 4 Ohms Power Amplifier with BLU link, 70V\/100V\u003c\/b\u003e\u003cbr\u003eThe new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eANALOG \u0026amp; DIGITAL INPUTS\u003c\/b\u003e – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.\u003cbr\u003e\u003cb\u003eNETWORK MONITORING \u0026amp; CONTROL\u003c\/b\u003e – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP\/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.\u003cbr\u003e\u003cb\u003ePROGRAMMABLE GENERAL PURPOSE INPUT\/OUTPUT PORTS\u003c\/b\u003e – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.\u003cbr\u003e\u003cb\u003eDIGITAL SIGNAL PROCESSING \u003c\/b\u003e– DSP capabilities include the following:\u003cbr\u003e - LevelMAX Limiters\u003cbr\u003e - Input\/Output EQ\u003cbr\u003e - Delay\u003cbr\u003e - Matrix Mixer\u003cbr\u003e - Speaker Line Monitoring\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eFrequency Response ( 8 Ohms, 20 Hz - 20 kHz): +\/- 0.25 dB\u003cbr\u003eBLU Link Input Signal to Noise Ratio (A-Weighted): \u0026gt; 104dB\u003cbr\u003eTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%\u003cbr\u003eVoltage Gain: 34 dB\u003cbr\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt;1000\u003cbr\u003eInput Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms\u003cbr\u003eMaximum Input Level before Compression: +20 dBu\u003cbr\u003eLoad Impedance (Stereo\/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms\u003cbr\u003eLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms\u003cbr\u003eCooling: Continuously variable speed forced air, front to back airflow\u003cbr\u003eMaximum Fan Noise (re dBA SPL @ 1M): 47\u003cbr\u003eRequired AC Mains (+\/- 10%): 100V-240V ~ 50\/60 Hz\u003cbr\u003eDimensions: 19\" x 3.5\" x 17\" (48.3cm x 8.9cm x 42.5cm)\u003cbr\u003eWeight: 30lbs (13.60kg)\u003cbr\u003eIEC Power Connector: 20A\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843140259940,"title":"Crown DCi 8|300N Eight-channel, 300W @ 4 Ohms Power Amplifier w BLU link, 70V\/100V","handle":"dci8x300n-u-usmx","description":"\u003cb\u003eCrown DCi 8|300N Eight-channel, 300W @ 4 Ohms Power Amplifier w BLU link, 70V\/100V\u003c\/b\u003e\u003cbr\u003eThe new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003eANALOG \u0026amp; DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.\u003cbr\u003eNETWORK MONITORING \u0026amp; CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP\/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.\u003cbr\u003ePROGRAMMABLE GENERAL PURPOSE INPUT\/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.\u003cbr\u003eDIGITAL SIGNAL PROCESSING – DSP capabilities include the following:\u003cbr\u003e - LevelMAX Limiters\u003cbr\u003e - Input\/Output EQ\u003cbr\u003e - Delay\u003cbr\u003e - Matrix Mixer\u003cbr\u003e - Speaker Line Monitoring\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eFrequency Response ( 8 Ohms, 20 Hz - 20 kHz): +\/- 0.25 dB\u003cbr\u003eBLU Link Input Signal to Noise Ratio (A-Weighted): \u0026gt; 104dB\u003cbr\u003eTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%\u003cbr\u003eVoltage Gain: 34 dB\u003cbr\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt;1000\u003cbr\u003eInput Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms\u003cbr\u003eMaximum Input Level before Compression: +20 dBu\u003cbr\u003eLoad Impedance (Stereo\/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms\u003cbr\u003eLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms\u003cbr\u003eCooling: Continuously variable speed forced air, front to back airflow\u003cbr\u003eMaximum Fan Noise (re dBA SPL @ 1M): 47\u003cbr\u003eRequired AC Mains (+\/- 10%): 100V-240V ~ 50\/60 Hz\u003cbr\u003eDimensions: 19\" x 3.5\" x 14.25\" (48.3cm x 8.9cm x 35.63cm)\u003cbr\u003eWeight: 23.5lbs (10.66kg)\u003cbr\u003eIEC Power Connector: 15A\u003cbr\u003e","published_at":"2019-02-19T02:27:41-06:00","created_at":"2019-02-19T02:27:42-06:00","vendor":"Crown","type":"pro audio","tags":["pro-audio"],"price":550000,"price_min":550000,"price_max":550000,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367146631268,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DCI8X300N-U-USMX","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Crown DCi 8|300N Eight-channel, 300W @ 4 Ohms Power Amplifier w BLU link, 70V\/100V","public_title":null,"options":["Default Title"],"price":550000,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/qumazsie7kgdyawduxkl.jpg?v=1550564862"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/qumazsie7kgdyawduxkl.jpg?v=1550564862","options":["Title"],"content":"\u003cb\u003eCrown DCi 8|300N Eight-channel, 300W @ 4 Ohms Power Amplifier w BLU link, 70V\/100V\u003c\/b\u003e\u003cbr\u003eThe new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003eANALOG \u0026amp; DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.\u003cbr\u003eNETWORK MONITORING \u0026amp; CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP\/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.\u003cbr\u003ePROGRAMMABLE GENERAL PURPOSE INPUT\/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.\u003cbr\u003eDIGITAL SIGNAL PROCESSING – DSP capabilities include the following:\u003cbr\u003e - LevelMAX Limiters\u003cbr\u003e - Input\/Output EQ\u003cbr\u003e - Delay\u003cbr\u003e - Matrix Mixer\u003cbr\u003e - Speaker Line Monitoring\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eFrequency Response ( 8 Ohms, 20 Hz - 20 kHz): +\/- 0.25 dB\u003cbr\u003eBLU Link Input Signal to Noise Ratio (A-Weighted): \u0026gt; 104dB\u003cbr\u003eTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%\u003cbr\u003eVoltage Gain: 34 dB\u003cbr\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt;1000\u003cbr\u003eInput Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms\u003cbr\u003eMaximum Input Level before Compression: +20 dBu\u003cbr\u003eLoad Impedance (Stereo\/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms\u003cbr\u003eLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms\u003cbr\u003eCooling: Continuously variable speed forced air, front to back airflow\u003cbr\u003eMaximum Fan Noise (re dBA SPL @ 1M): 47\u003cbr\u003eRequired AC Mains (+\/- 10%): 100V-240V ~ 50\/60 Hz\u003cbr\u003eDimensions: 19\" x 3.5\" x 14.25\" (48.3cm x 8.9cm x 35.63cm)\u003cbr\u003eWeight: 23.5lbs (10.66kg)\u003cbr\u003eIEC Power Connector: 15A\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843140161636,"title":"Crown DCi 4|600N Four-channel, 600W @ 4 Ohms Power Amplifier with BLU link, 70V\/100V","handle":"dci4x600n-u-usmx","description":"\u003cb\u003eCrown DCi 4|600N Four-channel, 600W @ 4 Ohms Power Amplifier with BLU link, 70V\/100V\u003c\/b\u003e\u003cbr\u003eThe new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003eANALOG \u0026amp; DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.\u003cbr\u003e\u003cbr\u003eNETWORK MONITORING \u0026amp; CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP\/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.\u003cbr\u003e\u003cbr\u003ePROGRAMMABLE GENERAL PURPOSE INPUT\/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.\u003cbr\u003e\u003cbr\u003eDIGITAL SIGNAL PROCESSING – DSP capabilities include the following:\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eLevelMAX Limiters\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput\/Output EQ\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDelay\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMatrix Mixer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpeaker Line Monitoring\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003eFrequency Response ( 8 Ohms, 20 Hz - 20 kHz): +\/- 0.25 dB\u003cbr\u003eBLU Link Input Signal to Noise Ratio (A-Weighted): \u0026gt; 104dB\u003cbr\u003eTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%\u003cbr\u003eVoltage Gain: 34 dB\u003cbr\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt;1000\u003cbr\u003eInput Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms\u003cbr\u003eMaximum Input Level before Compression: +20 dBu\u003cbr\u003eLoad Impedance (Stereo\/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms\u003cbr\u003eLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms\u003cbr\u003eCooling: Continuously variable speed forced air, front to back airflow\u003cbr\u003eMaximum Fan Noise (re dBA SPL @ 1M): 45\u003cbr\u003eRequired AC Mains (+\/- 10%): 100V-240V ~ 50\/60 Hz\u003cbr\u003eDimensions: 19\" x 3.5\" x 14.25\" (48.3cm x 8.9cm x 35.63cm)\u003cbr\u003eWeight: 20.1lbs (9.12kg)\u003cbr\u003eIEC Power Connector: 15A\u003cbr\u003e\u003cbr\u003e","published_at":"2019-02-19T02:27:40-06:00","created_at":"2019-02-19T02:27:41-06:00","vendor":"Crown","type":"pro audio","tags":["pro-audio"],"price":424800,"price_min":424800,"price_max":424800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367144697956,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DCI4X600N-U-USMX","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Crown DCi 4|600N Four-channel, 600W @ 4 Ohms Power Amplifier with BLU link, 70V\/100V","public_title":null,"options":["Default Title"],"price":424800,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/rwkgmdkzjarwdcqeddfr.jpg?v=1550564861"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/rwkgmdkzjarwdcqeddfr.jpg?v=1550564861","options":["Title"],"content":"\u003cb\u003eCrown DCi 4|600N Four-channel, 600W @ 4 Ohms Power Amplifier with BLU link, 70V\/100V\u003c\/b\u003e\u003cbr\u003eThe new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003eANALOG \u0026amp; DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.\u003cbr\u003e\u003cbr\u003eNETWORK MONITORING \u0026amp; CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP\/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.\u003cbr\u003e\u003cbr\u003ePROGRAMMABLE GENERAL PURPOSE INPUT\/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.\u003cbr\u003e\u003cbr\u003eDIGITAL SIGNAL PROCESSING – DSP capabilities include the following:\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eLevelMAX Limiters\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput\/Output EQ\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDelay\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMatrix Mixer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpeaker Line Monitoring\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003eFrequency Response ( 8 Ohms, 20 Hz - 20 kHz): +\/- 0.25 dB\u003cbr\u003eBLU Link Input Signal to Noise Ratio (A-Weighted): \u0026gt; 104dB\u003cbr\u003eTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%\u003cbr\u003eVoltage Gain: 34 dB\u003cbr\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt;1000\u003cbr\u003eInput Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms\u003cbr\u003eMaximum Input Level before Compression: +20 dBu\u003cbr\u003eLoad Impedance (Stereo\/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms\u003cbr\u003eLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms\u003cbr\u003eCooling: Continuously variable speed forced air, front to back airflow\u003cbr\u003eMaximum Fan Noise (re dBA SPL @ 1M): 45\u003cbr\u003eRequired AC Mains (+\/- 10%): 100V-240V ~ 50\/60 Hz\u003cbr\u003eDimensions: 19\" x 3.5\" x 14.25\" (48.3cm x 8.9cm x 35.63cm)\u003cbr\u003eWeight: 20.1lbs (9.12kg)\u003cbr\u003eIEC Power Connector: 15A\u003cbr\u003e\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843139932260,"title":"Crown DCi 4|300 Four-channel, 300W @ 4 Ohms Analog Power Amplifier, 70V\/100V","handle":"dci4x300-u-usmx","description":"\u003cb\u003eCrown DCi 4|300 Four-channel, 300W @ 4 Ohms Analog Power Amplifier, 70V\/100V\u003c\/b\u003e\u003cbr\u003eThe new DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eTRUE RACK DENSITY\u003c\/b\u003e – Power points of 300W or 600Win 2-\/4-\/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.\u003cbr\u003e\u003cb\u003eDIRECT DRIVE CONSTANT VOLTAGE\u003c\/b\u003e – Save money by using smaller gauge wiring to drive the speakers using either 70Vrms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces higher audio quality much more efficiently. \u003cbr\u003e\u003cb\u003eCHANNEL INDEPENDENT HI-Z\/LOW-Z SELECTION\u003c\/b\u003e –Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in high-Z mode (70Vrms or100Vrms). This means better design flexibility since DCi powers all loads on a channel-by-channel basis.\u003cbr\u003e\u003cb\u003eBRIDGEABLE CHANNEL PAIRS\u003c\/b\u003e – Unlike amps from other manufacturers, the DCi Series channels are bridgeable – even in 100Vrms mode – which means even more adaptability for higher power applications such as subwoofers.\u003cbr\u003e\u003cb\u003eREMOTE ON\/OFF INTERFACE\u003c\/b\u003e – Save power by integrating the amplifier into a control system so you can easily turn it on and off.\u003cbr\u003e\u003cb\u003eEFFICIENT COOLING DESIGN\u003c\/b\u003e – Highly efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.\u003cbr\u003e\u003cb\u003eADVANCED POWER FACTOR CORRECTION (PFC) UNIVERSAL POWER SUPPLY\u003c\/b\u003e – The most advanced power supply in an installation amplifier delivers power more efficiently in almost any condition than anyone else, resulting in less power dissipated and less heat in your racks.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eFrequency Response ( 8 Ohms, 20 Hz - 20 kHz): +\/- 0.25 dB\u003cbr\u003eSignal To Noise Ratio (A-weighted): \u0026gt; 108 dB\u003cbr\u003eTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%\u003cbr\u003eVoltage Gain: 34 dB\u003cbr\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt;1000\u003cbr\u003eInput Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms\u003cbr\u003eMaximum Input Level before Compression: +20 dBu\u003cbr\u003eMaximum Input Level before Clipping: +26 dBu\u003cbr\u003eLoad Impedance (Stereo\/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms\u003cbr\u003eLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms\u003cbr\u003eCooling: Continuously variable speed forced air, front to back airflow\u003cbr\u003eMaximum Fan Noise (re dBA SPL @ 1M): 45\u003cbr\u003eRequired AC Mains (+\/- 10%): 100V-240V ~ 50\/60 Hz\u003cbr\u003eDimensions: 19\" x 3.5\" x 14.25\" (48.3cm x 8.9cm x 35.63cm)\u003cbr\u003eWeight: 20.1lbs (9.12kg)\u003cbr\u003eIEC Power Connector: 15A\u003cbr\u003e","published_at":"2019-02-19T02:27:39-06:00","created_at":"2019-02-19T02:27:40-06:00","vendor":"Crown","type":"home audio","tags":["home-audio"],"price":219800,"price_min":219800,"price_max":219800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367142994020,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DCI4X300-U-USMX","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Crown DCi 4|300 Four-channel, 300W @ 4 Ohms Analog Power Amplifier, 70V\/100V","public_title":null,"options":["Default Title"],"price":219800,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/qtfrsmtelszguzadxg5x.jpg?v=1550564860"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/qtfrsmtelszguzadxg5x.jpg?v=1550564860","options":["Title"],"content":"\u003cb\u003eCrown DCi 4|300 Four-channel, 300W @ 4 Ohms Analog Power Amplifier, 70V\/100V\u003c\/b\u003e\u003cbr\u003eThe new DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eTRUE RACK DENSITY\u003c\/b\u003e – Power points of 300W or 600Win 2-\/4-\/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.\u003cbr\u003e\u003cb\u003eDIRECT DRIVE CONSTANT VOLTAGE\u003c\/b\u003e – Save money by using smaller gauge wiring to drive the speakers using either 70Vrms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces higher audio quality much more efficiently. \u003cbr\u003e\u003cb\u003eCHANNEL INDEPENDENT HI-Z\/LOW-Z SELECTION\u003c\/b\u003e –Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in high-Z mode (70Vrms or100Vrms). This means better design flexibility since DCi powers all loads on a channel-by-channel basis.\u003cbr\u003e\u003cb\u003eBRIDGEABLE CHANNEL PAIRS\u003c\/b\u003e – Unlike amps from other manufacturers, the DCi Series channels are bridgeable – even in 100Vrms mode – which means even more adaptability for higher power applications such as subwoofers.\u003cbr\u003e\u003cb\u003eREMOTE ON\/OFF INTERFACE\u003c\/b\u003e – Save power by integrating the amplifier into a control system so you can easily turn it on and off.\u003cbr\u003e\u003cb\u003eEFFICIENT COOLING DESIGN\u003c\/b\u003e – Highly efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.\u003cbr\u003e\u003cb\u003eADVANCED POWER FACTOR CORRECTION (PFC) UNIVERSAL POWER SUPPLY\u003c\/b\u003e – The most advanced power supply in an installation amplifier delivers power more efficiently in almost any condition than anyone else, resulting in less power dissipated and less heat in your racks.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eFrequency Response ( 8 Ohms, 20 Hz - 20 kHz): +\/- 0.25 dB\u003cbr\u003eSignal To Noise Ratio (A-weighted): \u0026gt; 108 dB\u003cbr\u003eTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%\u003cbr\u003eVoltage Gain: 34 dB\u003cbr\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt;1000\u003cbr\u003eInput Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms\u003cbr\u003eMaximum Input Level before Compression: +20 dBu\u003cbr\u003eMaximum Input Level before Clipping: +26 dBu\u003cbr\u003eLoad Impedance (Stereo\/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms\u003cbr\u003eLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms\u003cbr\u003eCooling: Continuously variable speed forced air, front to back airflow\u003cbr\u003eMaximum Fan Noise (re dBA SPL @ 1M): 45\u003cbr\u003eRequired AC Mains (+\/- 10%): 100V-240V ~ 50\/60 Hz\u003cbr\u003eDimensions: 19\" x 3.5\" x 14.25\" (48.3cm x 8.9cm x 35.63cm)\u003cbr\u003eWeight: 20.1lbs (9.12kg)\u003cbr\u003eIEC Power Connector: 15A\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843139768420,"title":"Crown DCi 4|300N Four-channel, 300W @ 4 Ohms Power Amplifier with BLU link, 70V\/100V","handle":"dci4x300n-u-usmx","description":"\u003cb\u003eCrown DCi 4|300N Four-channel, 300W @ 4 Ohms Power Amplifier with BLU link, 70V\/100V\u003c\/b\u003e\u003cbr\u003eThe new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003eANALOG \u0026amp; DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.\u003cbr\u003eNETWORK MONITORING \u0026amp; CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP\/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.\u003cbr\u003ePROGRAMMABLE GENERAL PURPOSE INPUT\/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.\u003cbr\u003eDIGITAL SIGNAL PROCESSING – DSP capabilities include the following:\u003cbr\u003e- LevelMAX Limiters\u003cbr\u003e- Input\/Output EQ\u003cbr\u003e- Delay\u003cbr\u003e- Matrix Mixer\u003cbr\u003e- Speaker Line Monitoring\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eFrequency Response ( 8 Ohms, 20 Hz - 20 kHz): +\/- 0.25 dB\u003cbr\u003eBLU Link Input Signal to Noise Ratio (A-Weighted): \u0026gt; 104dB\u003cbr\u003eTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%\u003cbr\u003eVoltage Gain: 34 dB\u003cbr\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt;1000\u003cbr\u003eInput Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms\u003cbr\u003eMaximum Input Level before Compression: +20 dBu\u003cbr\u003eLoad Impedance (Stereo\/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms\u003cbr\u003eLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms\u003cbr\u003eCooling: Continuously variable speed forced air, front to back airflow\u003cbr\u003eMaximum Fan Noise (re dBA SPL @ 1M): 45\u003cbr\u003eRequired AC Mains (+\/- 10%): 100V-240V ~ 50\/60 Hz\u003cbr\u003eIEC Power Connector: 15A IEC\u003cbr\u003eDimensions: 19\" x 3.5\" x 14.25\" (48.3cm x 8.9cm x 35.63cm)\u003cbr\u003eWeight: 20.1lbs (9.12kg)\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2019-02-19T02:27:38-06:00","created_at":"2019-02-19T02:27:39-06:00","vendor":"Crown","type":"home audio","tags":["home-audio"],"price":304800,"price_min":304800,"price_max":304800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367142600804,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DCI4X300N-U-USMX","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Crown DCi 4|300N Four-channel, 300W @ 4 Ohms Power Amplifier with BLU link, 70V\/100V","public_title":null,"options":["Default Title"],"price":304800,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/gqjjk1vogykizos6xjku.jpg?v=1550564859"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/gqjjk1vogykizos6xjku.jpg?v=1550564859","options":["Title"],"content":"\u003cb\u003eCrown DCi 4|300N Four-channel, 300W @ 4 Ohms Power Amplifier with BLU link, 70V\/100V\u003c\/b\u003e\u003cbr\u003eThe new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003eANALOG \u0026amp; DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.\u003cbr\u003eNETWORK MONITORING \u0026amp; CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP\/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.\u003cbr\u003ePROGRAMMABLE GENERAL PURPOSE INPUT\/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.\u003cbr\u003eDIGITAL SIGNAL PROCESSING – DSP capabilities include the following:\u003cbr\u003e- LevelMAX Limiters\u003cbr\u003e- Input\/Output EQ\u003cbr\u003e- Delay\u003cbr\u003e- Matrix Mixer\u003cbr\u003e- Speaker Line Monitoring\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eFrequency Response ( 8 Ohms, 20 Hz - 20 kHz): +\/- 0.25 dB\u003cbr\u003eBLU Link Input Signal to Noise Ratio (A-Weighted): \u0026gt; 104dB\u003cbr\u003eTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%\u003cbr\u003eVoltage Gain: 34 dB\u003cbr\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt;1000\u003cbr\u003eInput Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms\u003cbr\u003eMaximum Input Level before Compression: +20 dBu\u003cbr\u003eLoad Impedance (Stereo\/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms\u003cbr\u003eLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms\u003cbr\u003eCooling: Continuously variable speed forced air, front to back airflow\u003cbr\u003eMaximum Fan Noise (re dBA SPL @ 1M): 45\u003cbr\u003eRequired AC Mains (+\/- 10%): 100V-240V ~ 50\/60 Hz\u003cbr\u003eIEC Power Connector: 15A IEC\u003cbr\u003eDimensions: 19\" x 3.5\" x 14.25\" (48.3cm x 8.9cm x 35.63cm)\u003cbr\u003eWeight: 20.1lbs (9.12kg)\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843139637348,"title":"Crown DCi 2|600 Two-channel, 600W @ 4 Ohms Analog Power Amplifier; 70V\/100V","handle":"dci2x600-u-usmx","description":"Crown DCi 2|600 Two-channel, 600W @ 4 Ohms Analog Power Amplifier; 70V\/100V\u003cbr\u003e\u003cbr\u003eThe new DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eTRUE RACK DENSITY\u003c\/b\u003e – Power points of 300W or 600Win 2-\/4-\/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDIRECT DRIVE CONSTANT VOLTAGE\u003c\/b\u003e – Save money by using smaller gauge wiring to drive the speakers using either 70Vrms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces higher audio quality much more efficiently. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eCHANNEL INDEPENDENT HI-Z\/LOW-Z SELECTION\u003c\/b\u003e –Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in high-Z mode (70Vrms or100Vrms). This means better design flexibility since DCi powers all loads on a channel-by-channel basis.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBRIDGEABLE CHANNEL PAIRS\u003c\/b\u003e – Unlike amps from other manufacturers, the DCi Series channels are bridgeable – even in 100Vrms mode – which means even more adaptability for higher power applications such as subwoofers.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eREMOTE ON\/OFF INTERFACE\u003c\/b\u003e – Save power by integrating the amplifier into a control system so you can easily turn it on and off.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eEFFICIENT COOLING DESIGN\u003c\/b\u003e – Highly efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eADVANCED POWER FACTOR CORRECTION (PFC) UNIVERSAL POWER SUPPLY\u003c\/b\u003e – The most advanced power supply in an installation amplifier delivers power more efficiently in almost any condition than anyone else, resulting in less power dissipated and less heat in your racks.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eFrequency Response ( 8 Ohms, 20 Hz - 20 kHz): +\/- 0.25 dB\u003cbr\u003eSignal To Noise Ratio (A-weighted): \u0026gt; 108 dB\u003cbr\u003eTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%\u003cbr\u003eVoltage Gain: 34 dB\u003cbr\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt;1000\u003cbr\u003eInput Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms\u003cbr\u003eMaximum Input Level before Compression: +20 dBu\u003cbr\u003eMaximum Input Level before Clipping: +26 dBu\u003cbr\u003eLoad Impedance (Stereo\/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms\u003cbr\u003eLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms\u003cbr\u003eCooling: Continuously variable speed forced air, front to back airflow\u003cbr\u003eMaximum Fan Noise (re dBA SPL @ 1M): 45\u003cbr\u003eRequired AC Mains (+\/- 10%): 100V-240V ~ 50\/60 Hz\u003cbr\u003eDimensions: 19\" x 3.5\" x 14.25\" (48.3cm x 8.9cm x 35.63cm)\u003cbr\u003eWeight: 18lbs (8.53kg)\u003cbr\u003eIEC Power Connector: 15A\u003cbr\u003e","published_at":"2019-02-19T02:27:37-06:00","created_at":"2019-02-19T02:27:37-06:00","vendor":"Crown","type":"pro audio","tags":["pro-audio"],"price":199800,"price_min":199800,"price_max":199800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367142010980,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DCI2X600-U-USMX","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Crown DCi 2|600 Two-channel, 600W @ 4 Ohms Analog Power Amplifier; 70V\/100V","public_title":null,"options":["Default Title"],"price":199800,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/zxfvtpya83npp3knk2ha.jpg?v=1550564858"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/zxfvtpya83npp3knk2ha.jpg?v=1550564858","options":["Title"],"content":"Crown DCi 2|600 Two-channel, 600W @ 4 Ohms Analog Power Amplifier; 70V\/100V\u003cbr\u003e\u003cbr\u003eThe new DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eTRUE RACK DENSITY\u003c\/b\u003e – Power points of 300W or 600Win 2-\/4-\/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDIRECT DRIVE CONSTANT VOLTAGE\u003c\/b\u003e – Save money by using smaller gauge wiring to drive the speakers using either 70Vrms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces higher audio quality much more efficiently. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eCHANNEL INDEPENDENT HI-Z\/LOW-Z SELECTION\u003c\/b\u003e –Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in high-Z mode (70Vrms or100Vrms). This means better design flexibility since DCi powers all loads on a channel-by-channel basis.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBRIDGEABLE CHANNEL PAIRS\u003c\/b\u003e – Unlike amps from other manufacturers, the DCi Series channels are bridgeable – even in 100Vrms mode – which means even more adaptability for higher power applications such as subwoofers.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eREMOTE ON\/OFF INTERFACE\u003c\/b\u003e – Save power by integrating the amplifier into a control system so you can easily turn it on and off.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eEFFICIENT COOLING DESIGN\u003c\/b\u003e – Highly efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eADVANCED POWER FACTOR CORRECTION (PFC) UNIVERSAL POWER SUPPLY\u003c\/b\u003e – The most advanced power supply in an installation amplifier delivers power more efficiently in almost any condition than anyone else, resulting in less power dissipated and less heat in your racks.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eFrequency Response ( 8 Ohms, 20 Hz - 20 kHz): +\/- 0.25 dB\u003cbr\u003eSignal To Noise Ratio (A-weighted): \u0026gt; 108 dB\u003cbr\u003eTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%\u003cbr\u003eVoltage Gain: 34 dB\u003cbr\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt;1000\u003cbr\u003eInput Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms\u003cbr\u003eMaximum Input Level before Compression: +20 dBu\u003cbr\u003eMaximum Input Level before Clipping: +26 dBu\u003cbr\u003eLoad Impedance (Stereo\/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms\u003cbr\u003eLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms\u003cbr\u003eCooling: Continuously variable speed forced air, front to back airflow\u003cbr\u003eMaximum Fan Noise (re dBA SPL @ 1M): 45\u003cbr\u003eRequired AC Mains (+\/- 10%): 100V-240V ~ 50\/60 Hz\u003cbr\u003eDimensions: 19\" x 3.5\" x 14.25\" (48.3cm x 8.9cm x 35.63cm)\u003cbr\u003eWeight: 18lbs (8.53kg)\u003cbr\u003eIEC Power Connector: 15A\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843139506276,"title":"Crown DCi 4|1250N Four-channel, 1250W @ 4 Ohms Power Amplifier with BLU Link, 70V\/100V","handle":"dci4x1250n-u-usmx","description":"\u003cb\u003eCrown DCi 4|1250N Four-channel, 1250W @ 4 Ohms Power Amplifier with BLU Link, 70V\/100V\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eANALOG \u0026amp; DIGITAL INPUTS \u003c\/b\u003e– With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNETWORK MONITORING \u0026amp; CONTROL\u003c\/b\u003e – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP\/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePROGRAMMABLE GENERAL PURPOSE INPUT\/OUTPUT PORTS\u003c\/b\u003e – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDIGITAL SIGNAL PROCESSING\u003c\/b\u003e – DSP capabilities include the following:\u003cbr\u003e- LevelMAX Limiters\u003cbr\u003e- Input\/Output EQ\u003cbr\u003e- Delay\u003cbr\u003e- Matrix Mixer\u003cbr\u003e- Speaker Line Monitoring\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003eFrequency Response ( 8 Ohms, 20 Hz - 20 kHz): +\/- 0.25 dB\u003cbr\u003eBLU Link Input Signal to Noise Ratio (A-Weighted): \u0026gt; 104dB\u003cbr\u003eTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%\u003cbr\u003eVoltage Gain: 34 dB\u003cbr\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt;1500\u003cbr\u003eInput Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms\u003cbr\u003eMaximum Input Level before Compression: +20 dBu\u003cbr\u003eLoad Impedance (Stereo\/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms\u003cbr\u003eLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms\u003cbr\u003eCooling: Continuously variable speed forced air, front to back airflow\u003cbr\u003eMaximum Fan Noise (re dBA SPL @ 1M): 47\u003cbr\u003eRequired AC Mains (+\/- 10%): 100V-240V ~ 50\/60 Hz\u003cbr\u003eDimensions: 19\" x 3.5\" x 17\" (48.3cm x 8.9cm x 42.5cm)\u003cbr\u003eWeight: 30lbs (13.60kg)\u003cbr\u003eIEC Power Connector: 20A\u003cbr\u003e","published_at":"2019-02-19T02:27:36-06:00","created_at":"2019-02-19T02:27:36-06:00","vendor":"Crown","type":"pro audio","tags":["pro-audio"],"price":559800,"price_min":559800,"price_max":559800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367141650532,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DCI4X1250N-U-USMX","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Crown DCi 4|1250N Four-channel, 1250W @ 4 Ohms Power Amplifier with BLU Link, 70V\/100V","public_title":null,"options":["Default Title"],"price":559800,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/tvjw2ft3vpkhvvaumj25.jpg?v=1550564857"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/tvjw2ft3vpkhvvaumj25.jpg?v=1550564857","options":["Title"],"content":"\u003cb\u003eCrown DCi 4|1250N Four-channel, 1250W @ 4 Ohms Power Amplifier with BLU Link, 70V\/100V\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eANALOG \u0026amp; DIGITAL INPUTS \u003c\/b\u003e– With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNETWORK MONITORING \u0026amp; CONTROL\u003c\/b\u003e – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP\/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePROGRAMMABLE GENERAL PURPOSE INPUT\/OUTPUT PORTS\u003c\/b\u003e – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDIGITAL SIGNAL PROCESSING\u003c\/b\u003e – DSP capabilities include the following:\u003cbr\u003e- LevelMAX Limiters\u003cbr\u003e- Input\/Output EQ\u003cbr\u003e- Delay\u003cbr\u003e- Matrix Mixer\u003cbr\u003e- Speaker Line Monitoring\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003eFrequency Response ( 8 Ohms, 20 Hz - 20 kHz): +\/- 0.25 dB\u003cbr\u003eBLU Link Input Signal to Noise Ratio (A-Weighted): \u0026gt; 104dB\u003cbr\u003eTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%\u003cbr\u003eVoltage Gain: 34 dB\u003cbr\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt;1500\u003cbr\u003eInput Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms\u003cbr\u003eMaximum Input Level before Compression: +20 dBu\u003cbr\u003eLoad Impedance (Stereo\/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms\u003cbr\u003eLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms\u003cbr\u003eCooling: Continuously variable speed forced air, front to back airflow\u003cbr\u003eMaximum Fan Noise (re dBA SPL @ 1M): 47\u003cbr\u003eRequired AC Mains (+\/- 10%): 100V-240V ~ 50\/60 Hz\u003cbr\u003eDimensions: 19\" x 3.5\" x 17\" (48.3cm x 8.9cm x 42.5cm)\u003cbr\u003eWeight: 30lbs (13.60kg)\u003cbr\u003eIEC Power Connector: 20A\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843139276900,"title":"Crown DCi 2|300 Two-channel, 300W @ 4 Ohms Analog Power Amplifier, 70V\/100V","handle":"dci2x300-u-usmx","description":"\u003cb\u003eCrown DCi 2|300 Two-channel, 300W @ 4 Ohms Analog Power Amplifier, 70V\/100V\u003cbr\u003e\u003c\/b\u003eThe DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003eTRUE RACK DENSITY – Power points of 300W or 600Win 2-\/4-\/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.\u003cbr\u003eDIRECT DRIVE CONSTANT VOLTAGE – Save money by using smaller gauge wiring to drive the speakers using either 70Vrms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces higher audio quality much more efficiently. \u003cbr\u003eCHANNEL INDEPENDENT HI-Z\/LOW-Z SELECTION –Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in high-Z mode (70Vrms or100Vrms). This means better design flexibility since DCi powers all loads on a channel-by-channel basis.\u003cbr\u003eBRIDGEABLE CHANNEL PAIRS – Unlike amps from other manufacturers, the DCi Series channels are bridgeable – even in 100Vrms mode – which means even more adaptability for higher power applications such as subwoofers.\u003cbr\u003eREMOTE ON\/OFF INTERFACE – Save power by integrating the amplifier into a control system so you can easily turn it on and off.\u003cbr\u003eEFFICIENT COOLING DESIGN – Highly efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.\u003cbr\u003eADVANCED POWER FACTOR CORRECTION (PFC) UNIVERSAL POWER SUPPLY – The most advanced power supply in an installation amplifier delivers power more efficiently in almost any condition than anyone else, resulting in less power dissipated and less heat in your racks.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eFrequency Response ( 8 Ohms, 20 Hz - 20 kHz): +\/- 0.25 dB\u003cbr\u003eSignal To Noise Ratio (A-weighted): \u0026gt; 108 dB\u003cbr\u003eTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%\u003cbr\u003eVoltage Gain: 34 dB\u003cbr\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt;1000\u003cbr\u003eInput Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms\u003cbr\u003eMaximum Input Level before Compression: +20 dBu\u003cbr\u003eMaximum Input Level before Clipping: +26 dBu\u003cbr\u003eLoad Impedance (Stereo\/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms\u003cbr\u003eLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms\u003cbr\u003eCooling: Continuously variable speed forced air, front to back airflow\u003cbr\u003eMaximum Fan Noise (re dBA SPL @ 1M): 45\u003cbr\u003eRequired AC Mains (+\/- 10%): 100V-240V ~ 50\/60 Hz\u003cbr\u003eDimensions: 19\" x 3.5\" x 14.25\" (48.3cm x 8.9cm x 35.63cm)\u003cbr\u003eWeight: 18lbs (8.53kg)\u003cbr\u003eIEC Power Connector: 15A\u003cbr\u003e","published_at":"2019-02-19T02:27:35-06:00","created_at":"2019-02-19T02:27:35-06:00","vendor":"Crown","type":"pro audio","tags":["pro-audio"],"price":135000,"price_min":135000,"price_max":135000,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367140601956,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DCI2X300-U-USMX","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Crown DCi 2|300 Two-channel, 300W @ 4 Ohms Analog Power Amplifier, 70V\/100V","public_title":null,"options":["Default Title"],"price":135000,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/tf62yst3osfhqrjl5hyy.jpg?v=1550564856"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/tf62yst3osfhqrjl5hyy.jpg?v=1550564856","options":["Title"],"content":"\u003cb\u003eCrown DCi 2|300 Two-channel, 300W @ 4 Ohms Analog Power Amplifier, 70V\/100V\u003cbr\u003e\u003c\/b\u003eThe DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003eTRUE RACK DENSITY – Power points of 300W or 600Win 2-\/4-\/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.\u003cbr\u003eDIRECT DRIVE CONSTANT VOLTAGE – Save money by using smaller gauge wiring to drive the speakers using either 70Vrms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces higher audio quality much more efficiently. \u003cbr\u003eCHANNEL INDEPENDENT HI-Z\/LOW-Z SELECTION –Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in high-Z mode (70Vrms or100Vrms). This means better design flexibility since DCi powers all loads on a channel-by-channel basis.\u003cbr\u003eBRIDGEABLE CHANNEL PAIRS – Unlike amps from other manufacturers, the DCi Series channels are bridgeable – even in 100Vrms mode – which means even more adaptability for higher power applications such as subwoofers.\u003cbr\u003eREMOTE ON\/OFF INTERFACE – Save power by integrating the amplifier into a control system so you can easily turn it on and off.\u003cbr\u003eEFFICIENT COOLING DESIGN – Highly efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.\u003cbr\u003eADVANCED POWER FACTOR CORRECTION (PFC) UNIVERSAL POWER SUPPLY – The most advanced power supply in an installation amplifier delivers power more efficiently in almost any condition than anyone else, resulting in less power dissipated and less heat in your racks.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eFrequency Response ( 8 Ohms, 20 Hz - 20 kHz): +\/- 0.25 dB\u003cbr\u003eSignal To Noise Ratio (A-weighted): \u0026gt; 108 dB\u003cbr\u003eTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%\u003cbr\u003eVoltage Gain: 34 dB\u003cbr\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt;1000\u003cbr\u003eInput Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms\u003cbr\u003eMaximum Input Level before Compression: +20 dBu\u003cbr\u003eMaximum Input Level before Clipping: +26 dBu\u003cbr\u003eLoad Impedance (Stereo\/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms\u003cbr\u003eLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms\u003cbr\u003eCooling: Continuously variable speed forced air, front to back airflow\u003cbr\u003eMaximum Fan Noise (re dBA SPL @ 1M): 45\u003cbr\u003eRequired AC Mains (+\/- 10%): 100V-240V ~ 50\/60 Hz\u003cbr\u003eDimensions: 19\" x 3.5\" x 14.25\" (48.3cm x 8.9cm x 35.63cm)\u003cbr\u003eWeight: 18lbs (8.53kg)\u003cbr\u003eIEC Power Connector: 15A\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843139113060,"title":"Crown CDi DriveCore 4|300 Analog Input, 4 Channel, 300W per Output Channel","handle":"ncdi4x300-u-us","description":"\u003cb\u003eCrown CDi DriveCore 4|300 Analog Input, 4 Channel, 300W per Output Channel\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4|300 offers streamlined functionality to work in almost any small\/medium sized installation such as restaurants, retail stores, and more. Designed for ease-of-use in a variety of applications, the 4|300 is a 4-channel amp that includes network control\/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eDriveCore Technology \u003c\/b\u003e– Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.\u003cbr\u003e\u003cb\u003eNetwork Control and Monitoring\u003c\/b\u003e – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP\/IQ network.\u003cbr\u003e\u003cb\u003eDSP\u003c\/b\u003e – On-board Digital Signal Processor in each amplifier allows for custom configuration\u003cbr\u003e - Input Router\u003cbr\u003e - Input Delay – Up to 1000ms\u003cbr\u003e - Input Parametric EQ – 8 band\u003cbr\u003e - Crossover\u003cbr\u003e - Output Parametric EQ – 8 band\u003cbr\u003e - Output Delay – Up to 100ms\u003cbr\u003e - LevelMAX™ Limiter\u003cbr\u003e\u003cb\u003eBLU link (BL models only)\u003c\/b\u003e – Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link\u003cbr\u003e\u003cb\u003eDirect Drive 70\/100Vrms Output\u003c\/b\u003e – Each output channel is capable of provide either 70V or 100V for high impedance applications.\u003cbr\u003e\u003cb\u003eFront-Panel Interface\u003c\/b\u003e – Completely configure the amplifier using an intuitive front-panel interface.\u003cbr\u003e\u003cb\u003eGPIO\/AUX Port\u003c\/b\u003e – Recall presets, mute channels, monitor faults, power on\/off the amplifier, and more through a combined GPIO\/AUX Port. \u003cbr\u003e","published_at":"2019-02-19T02:27:34-06:00","created_at":"2019-02-19T02:27:34-06:00","vendor":"Crown","type":"pro audio","tags":["pro-audio"],"price":199900,"price_min":199900,"price_max":199900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367139618916,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NCDI4X300-U-US","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Crown CDi DriveCore 4|300 Analog Input, 4 Channel, 300W per Output Channel","public_title":null,"options":["Default Title"],"price":199900,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/kdhq77t7glnjgjwoux8u.jpg?v=1550564855"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/kdhq77t7glnjgjwoux8u.jpg?v=1550564855","options":["Title"],"content":"\u003cb\u003eCrown CDi DriveCore 4|300 Analog Input, 4 Channel, 300W per Output Channel\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4|300 offers streamlined functionality to work in almost any small\/medium sized installation such as restaurants, retail stores, and more. Designed for ease-of-use in a variety of applications, the 4|300 is a 4-channel amp that includes network control\/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eDriveCore Technology \u003c\/b\u003e– Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.\u003cbr\u003e\u003cb\u003eNetwork Control and Monitoring\u003c\/b\u003e – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP\/IQ network.\u003cbr\u003e\u003cb\u003eDSP\u003c\/b\u003e – On-board Digital Signal Processor in each amplifier allows for custom configuration\u003cbr\u003e - Input Router\u003cbr\u003e - Input Delay – Up to 1000ms\u003cbr\u003e - Input Parametric EQ – 8 band\u003cbr\u003e - Crossover\u003cbr\u003e - Output Parametric EQ – 8 band\u003cbr\u003e - Output Delay – Up to 100ms\u003cbr\u003e - LevelMAX™ Limiter\u003cbr\u003e\u003cb\u003eBLU link (BL models only)\u003c\/b\u003e – Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link\u003cbr\u003e\u003cb\u003eDirect Drive 70\/100Vrms Output\u003c\/b\u003e – Each output channel is capable of provide either 70V or 100V for high impedance applications.\u003cbr\u003e\u003cb\u003eFront-Panel Interface\u003c\/b\u003e – Completely configure the amplifier using an intuitive front-panel interface.\u003cbr\u003e\u003cb\u003eGPIO\/AUX Port\u003c\/b\u003e – Recall presets, mute channels, monitor faults, power on\/off the amplifier, and more through a combined GPIO\/AUX Port. \u003cbr\u003e"}
$1,529.00
Quick View {"id":2843138949220,"title":"Crown CDi DriveCore 2|600 Analog Input, 2 Channel, 600W per Output Channel","handle":"ncdi2x600-u-us","description":"\u003cb\u003eCrown CDi DriveCore 2|600 Analog Input, 2 Channel, 600W per Output Channel\u003c\/b\u003e\u003cbr\u003eThe CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2|600 offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and more. Designed for ease-of-use in a variety of applications, the 2|600 is a 2-channel amp that includes network control\/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eDriveCore Technology \u003c\/b\u003e– Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.\u003cbr\u003e\u003cb\u003eNetwork Control and Monitoring \u003c\/b\u003e– Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP\/IQ network.\u003cbr\u003e\u003cb\u003eDSP\u003c\/b\u003e – On-board Digital Signal Processor in each amplifier allows for custom configuration\u003cbr\u003e - Input Router\u003cbr\u003e - Input Delay – Up to 1000ms\u003cbr\u003e - Input Parametric EQ – 8 band\u003cbr\u003e - Crossover\u003cbr\u003e - Output Parametric EQ – 8 band\u003cbr\u003e - Output Delay – Up to 100ms\u003cbr\u003e - LevelMAX™ Limiter\u003cbr\u003e\u003cb\u003eBLU link (BL models only) \u003c\/b\u003e– Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link\u003cbr\u003e\u003cb\u003eDirect Drive 70\/100Vrms Output\u003c\/b\u003e – Each output channel is capable of provide either 70V or 100V for high impedance applications.\u003cbr\u003e\u003cb\u003eFront-Panel Interface\u003c\/b\u003e – Completely configure the amplifier using an intuitive front-panel interface.\u003cbr\u003e\u003cb\u003eGPIO\/AUX Port \u003c\/b\u003e– Recall presets, mute channels, monitor faults, power on\/off the amplifier, and more through a combined GPIO\/AUX Port. \u003cbr\u003e","published_at":"2019-02-19T02:27:33-06:00","created_at":"2019-02-19T02:27:33-06:00","vendor":"Crown","type":"pro audio","tags":["pro-audio"],"price":152900,"price_min":152900,"price_max":152900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367138963556,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NCDI2X600-U-US","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Crown CDi DriveCore 2|600 Analog Input, 2 Channel, 600W per Output Channel","public_title":null,"options":["Default Title"],"price":152900,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/b9ry6iwbng9xzqkledsw.jpg?v=1550564854"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/b9ry6iwbng9xzqkledsw.jpg?v=1550564854","options":["Title"],"content":"\u003cb\u003eCrown CDi DriveCore 2|600 Analog Input, 2 Channel, 600W per Output Channel\u003c\/b\u003e\u003cbr\u003eThe CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2|600 offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and more. Designed for ease-of-use in a variety of applications, the 2|600 is a 2-channel amp that includes network control\/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eDriveCore Technology \u003c\/b\u003e– Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.\u003cbr\u003e\u003cb\u003eNetwork Control and Monitoring \u003c\/b\u003e– Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP\/IQ network.\u003cbr\u003e\u003cb\u003eDSP\u003c\/b\u003e – On-board Digital Signal Processor in each amplifier allows for custom configuration\u003cbr\u003e - Input Router\u003cbr\u003e - Input Delay – Up to 1000ms\u003cbr\u003e - Input Parametric EQ – 8 band\u003cbr\u003e - Crossover\u003cbr\u003e - Output Parametric EQ – 8 band\u003cbr\u003e - Output Delay – Up to 100ms\u003cbr\u003e - LevelMAX™ Limiter\u003cbr\u003e\u003cb\u003eBLU link (BL models only) \u003c\/b\u003e– Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link\u003cbr\u003e\u003cb\u003eDirect Drive 70\/100Vrms Output\u003c\/b\u003e – Each output channel is capable of provide either 70V or 100V for high impedance applications.\u003cbr\u003e\u003cb\u003eFront-Panel Interface\u003c\/b\u003e – Completely configure the amplifier using an intuitive front-panel interface.\u003cbr\u003e\u003cb\u003eGPIO\/AUX Port \u003c\/b\u003e– Recall presets, mute channels, monitor faults, power on\/off the amplifier, and more through a combined GPIO\/AUX Port. \u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843138818148,"title":"Crown CDi DriveCore 2|600BL Analog + BLU link input, 2 channel, 600W per output channel","handle":"ncdi2x600bl-u-us","description":"\u003cb\u003eCrown CDi DriveCore 2|600BL Analog + BLU link input, 2 channel, 600W per output channel\u003c\/b\u003e\u003cbr\u003eThe CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2|600BL offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and more. Designed for ease-of-use in a variety of applications, the 2|600BL is a 2-channel amp that includes network control\/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The 2|600BL also comes with BLU link, adding the ability to send and receive channels over HARMAN’s digital audio BUS. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eDriveCore Technology\u003c\/b\u003e – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.\u003cbr\u003e\u003cb\u003eNetwork Control and Monitoring\u003c\/b\u003e – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP\/IQ network.\u003cbr\u003e\u003cb\u003eDSP \u003c\/b\u003e– On-board Digital Signal Processor in each amplifier allows for custom configuration\u003cbr\u003e - Input Router\u003cbr\u003e - Input Delay – Up to 1000ms\u003cbr\u003e - Input Parametric EQ – 8 band\u003cbr\u003e - Crossover\u003cbr\u003e - Output Parametric EQ – 8 band\u003cbr\u003e - Output Delay – Up to 100ms\u003cbr\u003e - LevelMAX™ Limiter\u003cbr\u003e\u003cb\u003eBLU link (BL models only) \u003c\/b\u003e– Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link\u003cbr\u003e\u003cb\u003eDirect Drive 70\/100Vrms Output\u003c\/b\u003e – Each output channel is capable of provide either 70V or 100V for high impedance applications.\u003cbr\u003e\u003cb\u003eFront-Panel Interface\u003c\/b\u003e – Completely configure the amplifier using an intuitive front-panel interface.\u003cbr\u003e\u003cb\u003eGPIO\/AUX Port \u003c\/b\u003e– Recall presets, mute channels, monitor faults, power on\/off the amplifier, and more through a combined GPIO\/AUX Port. \u003cbr\u003e\u003cbr\u003e","published_at":"2019-02-19T02:27:31-06:00","created_at":"2019-02-19T02:27:32-06:00","vendor":"Crown","type":"pro audio","tags":["pro-audio"],"price":183900,"price_min":183900,"price_max":183900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367138898020,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NCDI2X600BL-U-US","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Crown CDi DriveCore 2|600BL Analog + BLU link input, 2 channel, 600W per output channel","public_title":null,"options":["Default Title"],"price":183900,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/ssyxpxpp8tdvsjas6izv.jpg?v=1550564852"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/ssyxpxpp8tdvsjas6izv.jpg?v=1550564852","options":["Title"],"content":"\u003cb\u003eCrown CDi DriveCore 2|600BL Analog + BLU link input, 2 channel, 600W per output channel\u003c\/b\u003e\u003cbr\u003eThe CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2|600BL offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and more. Designed for ease-of-use in a variety of applications, the 2|600BL is a 2-channel amp that includes network control\/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The 2|600BL also comes with BLU link, adding the ability to send and receive channels over HARMAN’s digital audio BUS. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eDriveCore Technology\u003c\/b\u003e – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.\u003cbr\u003e\u003cb\u003eNetwork Control and Monitoring\u003c\/b\u003e – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP\/IQ network.\u003cbr\u003e\u003cb\u003eDSP \u003c\/b\u003e– On-board Digital Signal Processor in each amplifier allows for custom configuration\u003cbr\u003e - Input Router\u003cbr\u003e - Input Delay – Up to 1000ms\u003cbr\u003e - Input Parametric EQ – 8 band\u003cbr\u003e - Crossover\u003cbr\u003e - Output Parametric EQ – 8 band\u003cbr\u003e - Output Delay – Up to 100ms\u003cbr\u003e - LevelMAX™ Limiter\u003cbr\u003e\u003cb\u003eBLU link (BL models only) \u003c\/b\u003e– Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link\u003cbr\u003e\u003cb\u003eDirect Drive 70\/100Vrms Output\u003c\/b\u003e – Each output channel is capable of provide either 70V or 100V for high impedance applications.\u003cbr\u003e\u003cb\u003eFront-Panel Interface\u003c\/b\u003e – Completely configure the amplifier using an intuitive front-panel interface.\u003cbr\u003e\u003cb\u003eGPIO\/AUX Port \u003c\/b\u003e– Recall presets, mute channels, monitor faults, power on\/off the amplifier, and more through a combined GPIO\/AUX Port. \u003cbr\u003e\u003cbr\u003e"}