Parts

Filter
View
Showing 1 - 16 of 40 Items
$799.00
Quick View {"id":3673688408164,"title":"Rane Pro AM2 | Automixer (1U) - Gain-Sharing Automatic Mic Mixer, 8 Mic Inputs, XLR Mic\/Line Output","handle":"am2","description":"The Rane AM2 is both an 8 channel, gain-sharing automatic mic mixer and simultaneously a Rane RAD. Use it as a standalone mic-only mixer, add more gain-shared mics using up to seven additional AM2 Automixers, and\/or use the RAD Port to transport the mic mix to Rane's HAL system.\u003cbr\u003e\u003cbr\u003eEach of the eight XLR Mic Inputs offers front panel input Level controls feeding a gain-sharing automatic mixer. Rear panel, 3-position selectors support dynamic mics (no phantom power), condenser mics (48 V), or line input optimized for wireless receiver outputs (+10 dBu max). All Level controls come with front panel signal and overload indicators.\u003cbr\u003e\u003cbr\u003eThe AM2 is optimized for automixing speech. The mic inputs have a fixed 100 Hz to 7 kHz bandpass filter to provide the best voice-only automatic mixing using the gain-sharing algorithm.\u003cbr\u003e\u003cbr\u003eThe XLR Main Output can be set to mic- or line-level to feed a mic snake or a +20 dBu max balanced input. When an AM2 is used standalone, both the XLR Output and the RAD Port output audio are affected by the front panel Output Level control. When the AM2’s Cascade Output feeds a downstream Rane AM2, the front panel Output Level control only affects the XLR Output.\u003cbr\u003e\u003cbr\u003eThe RAD Port sends the AM2 Output mix to a Rane HAL System. Cascade IN accepts audio and data from an upstream AM2’s Cascade OUT. This adds eight more mic channels to the initial AM 2 creating a 16-channel gain-sharing automix. A maximum of eight AM2s can be cascaded, offering up to 64 gain-shared mics. Simply connect Cascade OUT ports to Cascade IN ports and the RAD Port to the HAL. Both the Cascade IN port and the Cascade OUT\/RAD Port have status indicators to aid setup and troubleshooting. Rear panel Fault, Locate, and Power indicators inform of device errors, the AM2’s physical location and AC power status. Duplicate Locate and Power indicators on the front help installers physically locate and verify AC power to the AM2.\u003cbr\u003e\u003cbr\u003eINPUTS\u003cbr\u003e\u003cbr\u003eGain-Sharing Automatic Mic Mixing:\u003cbr\u003eEight XLR Inputs with Level controls \u0026amp; Sig\/OL indicators.\u003cbr\u003eEach can be Mic, Mic with 48V phantom, or Line-level.\u003cbr\u003eAdd up to 64 more gain-sharing inputs by cascading AM2 Automixers.\u003cbr\u003eAdd other audio sources, line inputs and remote controls by connecting to HAL system\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eOUTPUTS (all MONO)\u003cbr\u003e\u003cbr\u003eXLR Main with Mic\/Line switch, Level control \u0026amp; Sig\/OL.\u003cbr\u003eRane RAD and Cascade IN RJ-45 Ports:\u003cbr\u003eCascade In Port connects up to seven additional Rane AM2 mixers, (eight units total)\u003cbr\u003eRAD Port may send Output to HAL (DSP\/control). It is possible to cascade the AM2 mix into Halogen's Gain-Sharing Auto Mixer or Room Combine Processor DSP, so that all mics connected to HAL may gain-share.\u003cbr\u003e\u003cbr\u003eAM2\u003cbr\u003eIEC Power Cable\u003cbr\u003eUser Guide\u003cbr\u003eSafety \u0026amp; Warranty Manual\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003eItem is original and sealed.\u003cbr\u003eWith Manufacturer Warranty.\u003cbr\u003eRestocking Fee: 15%","published_at":"2019-08-07T05:19:47-05:00","created_at":"2019-08-07T05:19:48-05:00","vendor":"Rane Pro","type":"parts","tags":["parts"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28211093799012,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"AM2","requires_shipping":true,"taxable":true,"featured_image":{"id":11626893574244,"product_id":3673688408164,"position":1,"created_at":"2019-08-07T05:19:48-05:00","updated_at":"2019-08-07T05:19:48-05:00","alt":"Rane Pro AM2 | Automixer (1U) - Gain-Sharing Automatic Mic Mixer, 8 Mic Inputs, XLR Mic\/Line Output","width":1200,"height":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/cvjo74g8kfpsh2la0ya3.jpg?v=1565173188","variant_ids":[28211093799012]},"available":true,"name":"Rane Pro AM2 | Automixer (1U) - Gain-Sharing Automatic Mic Mixer, 8 Mic Inputs, XLR Mic\/Line Output","public_title":null,"options":["Default Title"],"price":79900,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"1"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/cvjo74g8kfpsh2la0ya3.jpg?v=1565173188"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/cvjo74g8kfpsh2la0ya3.jpg?v=1565173188","options":["Title"],"content":"The Rane AM2 is both an 8 channel, gain-sharing automatic mic mixer and simultaneously a Rane RAD. Use it as a standalone mic-only mixer, add more gain-shared mics using up to seven additional AM2 Automixers, and\/or use the RAD Port to transport the mic mix to Rane's HAL system.\u003cbr\u003e\u003cbr\u003eEach of the eight XLR Mic Inputs offers front panel input Level controls feeding a gain-sharing automatic mixer. Rear panel, 3-position selectors support dynamic mics (no phantom power), condenser mics (48 V), or line input optimized for wireless receiver outputs (+10 dBu max). All Level controls come with front panel signal and overload indicators.\u003cbr\u003e\u003cbr\u003eThe AM2 is optimized for automixing speech. The mic inputs have a fixed 100 Hz to 7 kHz bandpass filter to provide the best voice-only automatic mixing using the gain-sharing algorithm.\u003cbr\u003e\u003cbr\u003eThe XLR Main Output can be set to mic- or line-level to feed a mic snake or a +20 dBu max balanced input. When an AM2 is used standalone, both the XLR Output and the RAD Port output audio are affected by the front panel Output Level control. When the AM2’s Cascade Output feeds a downstream Rane AM2, the front panel Output Level control only affects the XLR Output.\u003cbr\u003e\u003cbr\u003eThe RAD Port sends the AM2 Output mix to a Rane HAL System. Cascade IN accepts audio and data from an upstream AM2’s Cascade OUT. This adds eight more mic channels to the initial AM 2 creating a 16-channel gain-sharing automix. A maximum of eight AM2s can be cascaded, offering up to 64 gain-shared mics. Simply connect Cascade OUT ports to Cascade IN ports and the RAD Port to the HAL. Both the Cascade IN port and the Cascade OUT\/RAD Port have status indicators to aid setup and troubleshooting. Rear panel Fault, Locate, and Power indicators inform of device errors, the AM2’s physical location and AC power status. Duplicate Locate and Power indicators on the front help installers physically locate and verify AC power to the AM2.\u003cbr\u003e\u003cbr\u003eINPUTS\u003cbr\u003e\u003cbr\u003eGain-Sharing Automatic Mic Mixing:\u003cbr\u003eEight XLR Inputs with Level controls \u0026amp; Sig\/OL indicators.\u003cbr\u003eEach can be Mic, Mic with 48V phantom, or Line-level.\u003cbr\u003eAdd up to 64 more gain-sharing inputs by cascading AM2 Automixers.\u003cbr\u003eAdd other audio sources, line inputs and remote controls by connecting to HAL system\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eOUTPUTS (all MONO)\u003cbr\u003e\u003cbr\u003eXLR Main with Mic\/Line switch, Level control \u0026amp; Sig\/OL.\u003cbr\u003eRane RAD and Cascade IN RJ-45 Ports:\u003cbr\u003eCascade In Port connects up to seven additional Rane AM2 mixers, (eight units total)\u003cbr\u003eRAD Port may send Output to HAL (DSP\/control). It is possible to cascade the AM2 mix into Halogen's Gain-Sharing Auto Mixer or Room Combine Processor DSP, so that all mics connected to HAL may gain-share.\u003cbr\u003e\u003cbr\u003eAM2\u003cbr\u003eIEC Power Cable\u003cbr\u003eUser Guide\u003cbr\u003eSafety \u0026amp; Warranty Manual\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003eItem is original and sealed.\u003cbr\u003eWith Manufacturer Warranty.\u003cbr\u003eRestocking Fee: 15%"}
SPECIAL ORDER
Quick View {"id":2843157069924,"title":"Cerwin-Vega SL-36B Input Plate\/Terminal","handle":"sl-36b-input-plate-terminal","description":"\u003cspan\u003eInput Plate or Terminal compatible to Cerwin Vega SL-36B Earthquake Subwoofer\u003c\/span\u003e","published_at":"2019-02-19T02:29:48-06:00","created_at":"2019-02-19T02:29:48-06:00","vendor":"Cerwin-Vega","type":"parts","tags":["parts"],"price":5900,"price_min":5900,"price_max":5900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367266136164,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SL-36B Input Plate\/Terminal","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Cerwin-Vega SL-36B Input Plate\/Terminal","public_title":null,"options":["Default Title"],"price":5900,"weight":907,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/qtmmlczngk9xvdoqfdrc.jpg?v=1550564989"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/qtmmlczngk9xvdoqfdrc.jpg?v=1550564989","options":["Title"],"content":"\u003cspan\u003eInput Plate or Terminal compatible to Cerwin Vega SL-36B Earthquake Subwoofer\u003c\/span\u003e"}
SPECIAL ORDER
Quick View {"id":2364941369444,"title":"Truss Totem 2.0 A","handle":"truss-totem-2-5a","description":"SQ-4112, SQ-4137, BASE PLATE 20X20A, GT-TC2.0Z\u003cbr\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\n\u003cp\u003eIdeal for mounting single light fixtures or creating a sophisticated ambience in entertainment, theatrical, or trade show venues, the 6.56' \u003cb\u003eTruss Totem 2.0A\u003c\/b\u003e from \u003cb\u003eGlobal Truss\u003c\/b\u003e includes a base plate, top plate, and a square truss section. A white translucent truss cover is also included. Colored lights are frequently placed inside the totem at its base, for a dramatic effect.\u003c\/p\u003e\n\u003cp\u003eProduct Highlights\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor Entertainment or Theatrical Venues\u003c\/li\u003e\n\u003cli\u003eTop Plate and Base Plate\u003c\/li\u003e\n\u003cli\u003eRectangular Truss Section\u003c\/li\u003e\n\u003cli\u003eWhite Translucent Truss Cover\u003c\/li\u003e\n\u003c\/ul\u003eIMPORTANT NOTE: \u003cbr\u003eItem is original and sealed. \u003cbr\u003eShipped directly from Manufacturer.\u003cbr\u003eWith Full Manufacturer Warranty.\u003cbr\u003eRestocking fee: 15.00%\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e","published_at":"2019-01-15T01:01:09-06:00","created_at":"2019-01-15T01:01:10-06:00","vendor":"GLOBAL TRUSS AMERICA","type":"parts","tags":["parts"],"price":82995,"price_min":82995,"price_max":82995,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":21196183142500,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GT-TC2.0Z","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Truss Totem 2.0 A","public_title":null,"options":["Default Title"],"price":82995,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/ltahwd3ksjrow73mfeob.jpg?v=1547535670"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/ltahwd3ksjrow73mfeob.jpg?v=1547535670","options":["Title"],"content":"SQ-4112, SQ-4137, BASE PLATE 20X20A, GT-TC2.0Z\u003cbr\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\n\u003cp\u003eIdeal for mounting single light fixtures or creating a sophisticated ambience in entertainment, theatrical, or trade show venues, the 6.56' \u003cb\u003eTruss Totem 2.0A\u003c\/b\u003e from \u003cb\u003eGlobal Truss\u003c\/b\u003e includes a base plate, top plate, and a square truss section. A white translucent truss cover is also included. Colored lights are frequently placed inside the totem at its base, for a dramatic effect.\u003c\/p\u003e\n\u003cp\u003eProduct Highlights\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor Entertainment or Theatrical Venues\u003c\/li\u003e\n\u003cli\u003eTop Plate and Base Plate\u003c\/li\u003e\n\u003cli\u003eRectangular Truss Section\u003c\/li\u003e\n\u003cli\u003eWhite Translucent Truss Cover\u003c\/li\u003e\n\u003c\/ul\u003eIMPORTANT NOTE: \u003cbr\u003eItem is original and sealed. \u003cbr\u003eShipped directly from Manufacturer.\u003cbr\u003eWith Full Manufacturer Warranty.\u003cbr\u003eRestocking fee: 15.00%\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2364940550244,"title":"Truss Totem 2.5 A","handle":"truss-totem-2-0a","description":"SQ-4113, SQ-4137, BASE PLATE 30X30A, GT-TC2.5Z\u003cbr\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eThis 8.20' \u003cstrong\u003eF34 Square \u003c\/strong\u003e\u003cb\u003eTruss Totem 2.5A Kit with Cover \u003c\/b\u003eby \u003cb\u003eGlobal Truss\u003c\/b\u003e is a standalone column that is generally used at entertainment venues to support single moving head effect lights. The kit includes a 8.20' F34 square truss segment, the SQ-4137 top plate, the F34 30 x 30\" aluminum base plate, and an F34 pull-over-style zippered truss cover of the appropriate length.\u003c\/p\u003e\n\u003cp\u003eProduct Highlights\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF34 Truss Segment\u003c\/li\u003e\n\u003cli\u003eSQ-4137 Top Plate\u003c\/li\u003e\n\u003cli\u003eAluminum Base Plate\u003c\/li\u003e\n\u003cli\u003eZippered Truss Cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eIMPORTANT NOTE: \u003c\/b\u003e \u003cbr\u003eItem is original and sealed. \u003cbr\u003eShipped directly from Manufacturer.\u003cbr\u003eWith Full Manufacturer Warranty.\u003cbr\u003eRestocking fee: 15.00%\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e","published_at":"2019-01-15T01:01:08-06:00","created_at":"2019-01-15T01:01:09-06:00","vendor":"GLOBAL TRUSS AMERICA","type":"parts","tags":["parts"],"price":101995,"price_min":101995,"price_max":101995,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":21196180652132,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GT-TC2.5Z","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Truss Totem 2.5 A","public_title":null,"options":["Default Title"],"price":101995,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/ljsgvpvxuxqjdn9ozwh4.jpg?v=1547535669"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/ljsgvpvxuxqjdn9ozwh4.jpg?v=1547535669","options":["Title"],"content":"SQ-4113, SQ-4137, BASE PLATE 30X30A, GT-TC2.5Z\u003cbr\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eThis 8.20' \u003cstrong\u003eF34 Square \u003c\/strong\u003e\u003cb\u003eTruss Totem 2.5A Kit with Cover \u003c\/b\u003eby \u003cb\u003eGlobal Truss\u003c\/b\u003e is a standalone column that is generally used at entertainment venues to support single moving head effect lights. The kit includes a 8.20' F34 square truss segment, the SQ-4137 top plate, the F34 30 x 30\" aluminum base plate, and an F34 pull-over-style zippered truss cover of the appropriate length.\u003c\/p\u003e\n\u003cp\u003eProduct Highlights\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF34 Truss Segment\u003c\/li\u003e\n\u003cli\u003eSQ-4137 Top Plate\u003c\/li\u003e\n\u003cli\u003eAluminum Base Plate\u003c\/li\u003e\n\u003cli\u003eZippered Truss Cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eIMPORTANT NOTE: \u003c\/b\u003e \u003cbr\u003eItem is original and sealed. \u003cbr\u003eShipped directly from Manufacturer.\u003cbr\u003eWith Full Manufacturer Warranty.\u003cbr\u003eRestocking fee: 15.00%\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2364939894884,"title":"Truss Totem 1.5 A","handle":"truss-totem-1-5a","description":"SQ-4111, SQ-4137, BASE PLATE 20X20A, GT-TC1.5Z\u003cbr\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\n\u003cp\u003eIdeal for mounting single light fixtures or creating a sophisticated ambience in entertainment, theatrical, or trade show venues, the 4.95' \u003cb\u003eTruss Totem 1.5A\u003c\/b\u003e from \u003cb\u003eGlobal Truss\u003c\/b\u003e includes a base plate, top plate, and a square truss section. A white translucent truss cover is also included. Colored lights are frequently placed inside the totem at its base, for a dramatic effect.\u003c\/p\u003e\n\u003cp\u003eProduct Highlights\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor Entertainment or Theatrical Venues\u003c\/li\u003e\n\u003cli\u003eTop Plate and Base Plate\u003c\/li\u003e\n\u003cli\u003eRectangular Truss Section\u003c\/li\u003e\n\u003cli\u003eWhite Translucent Truss Cover\u003c\/li\u003e\n\u003c\/ul\u003eIMPORTANT NOTE: \u003cbr\u003eItem is original and sealed. \u003cbr\u003eShipped directly from Manufacturer.\u003cbr\u003eWith Full Manufacturer Warranty.\u003cbr\u003eRestocking fee: 15.00%\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003c\/div\u003e","published_at":"2019-01-15T01:01:07-06:00","created_at":"2019-01-15T01:01:08-06:00","vendor":"GLOBAL TRUSS AMERICA","type":"parts","tags":["parts"],"price":74995,"price_min":74995,"price_max":74995,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":21196177244260,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GT-TC1.5Z","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Truss Totem 1.5 A","public_title":null,"options":["Default Title"],"price":74995,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/fawgoclrli99enitnsx1.jpg?v=1547535668"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/fawgoclrli99enitnsx1.jpg?v=1547535668","options":["Title"],"content":"SQ-4111, SQ-4137, BASE PLATE 20X20A, GT-TC1.5Z\u003cbr\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\n\u003cp\u003eIdeal for mounting single light fixtures or creating a sophisticated ambience in entertainment, theatrical, or trade show venues, the 4.95' \u003cb\u003eTruss Totem 1.5A\u003c\/b\u003e from \u003cb\u003eGlobal Truss\u003c\/b\u003e includes a base plate, top plate, and a square truss section. A white translucent truss cover is also included. Colored lights are frequently placed inside the totem at its base, for a dramatic effect.\u003c\/p\u003e\n\u003cp\u003eProduct Highlights\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor Entertainment or Theatrical Venues\u003c\/li\u003e\n\u003cli\u003eTop Plate and Base Plate\u003c\/li\u003e\n\u003cli\u003eRectangular Truss Section\u003c\/li\u003e\n\u003cli\u003eWhite Translucent Truss Cover\u003c\/li\u003e\n\u003c\/ul\u003eIMPORTANT NOTE: \u003cbr\u003eItem is original and sealed. \u003cbr\u003eShipped directly from Manufacturer.\u003cbr\u003eWith Full Manufacturer Warranty.\u003cbr\u003eRestocking fee: 15.00%\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003c\/div\u003e"}
$549.99
Quick View {"id":1582985019492,"title":"ProX XT-FTP328-656-B Flex Tower™ Totem Package w\/ Road Case (Adjustable 6.56ft or 3.28ft)","handle":"xt-ftp328-656-b","description":"Flex Tower Platform Package 3.28ft or 6.56ftIncl. 4x 3.28ft I-Beam, BLK \u0026amp; White Scrims, Speaker Stud,12x12\" and 24x24\" Fodling Base plate, Carrying Bag\u003cbr\u003e\u003cp\u003eMake your DJ setup rise above the rest with the\u003cstrong\u003e Flex Tower Platform Totem\u003c\/strong\u003e package. The innovative flex tower is a complete package to create a single mount for disc jockey lights, speakers or various other display uses.\u003c\/p\u003e\u003cp\u003eThis package comes with everything you need to make a single 2 meter (6.56 ft) platform or a 1 meter (3.2 ft) tower.  Tidy up the look with the black scrim sleeve or up-light the white scrim sleeve for a custom color effect.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cspan\u003eThis package includes a \u003c\/span\u003e\u003cstrong\u003eSOFT CARRYING BAG!\u003c\/strong\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e(4) 12\" 1M 3.28ft I Beam Truss\u003c\/li\u003e\n\u003cli\u003e(1) 12\" x 12\" Top Plate\u003c\/li\u003e\n\u003cli\u003e(1) Speaker Mount Stud for 12” Top Plate\u003c\/li\u003e\n\u003cli\u003e(1) 24\" x 24\" Folding Base Plate\u003c\/li\u003e\n\u003cli\u003e(8) Half Conical Connectors with Pins\u003c\/li\u003e\n\u003cli\u003e(2) Truss Sleeves in Black and White\u003c\/li\u003e\n\u003cli\u003e(1) Soft Carry Bag that fits all parts (Bag Dimensions 41” L x 13” W x 13” L\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e41.00\"L x 12.50\"W x\t9.00\"H\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 48.00 lbs\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShipping Dimensions\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e47.00\"L x 14.00\"D x\t12.00\"H\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eShipping Weight: 53.00 lbs\u003c\/span\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eIMPORTANT NOTE: \u003c\/b\u003e \u003cbr\u003eItem is original and sealed. \u003cbr\u003eShipped directly from Manufacturer.\u003cbr\u003eWith Full Manufacturer Warranty.\u003cbr\u003eRestocking fee: 15.00%\u003c\/p\u003e\u003cbr\u003e","published_at":"2018-11-30T04:29:04-06:00","created_at":"2018-11-30T04:29:05-06:00","vendor":"ProX","type":"parts","tags":["parts"],"price":54999,"price_min":54999,"price_max":54999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15140009869412,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XT-FTP328-656-B","requires_shipping":false,"taxable":true,"featured_image":null,"available":true,"name":"ProX XT-FTP328-656-B Flex Tower™ Totem Package w\/ Road Case (Adjustable 6.56ft or 3.28ft)","public_title":null,"options":["Default Title"],"price":54999,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/xpr3iefz4mvbfw5gixbr.jpg?v=1543573745"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/xpr3iefz4mvbfw5gixbr.jpg?v=1543573745","options":["Title"],"content":"Flex Tower Platform Package 3.28ft or 6.56ftIncl. 4x 3.28ft I-Beam, BLK \u0026amp; White Scrims, Speaker Stud,12x12\" and 24x24\" Fodling Base plate, Carrying Bag\u003cbr\u003e\u003cp\u003eMake your DJ setup rise above the rest with the\u003cstrong\u003e Flex Tower Platform Totem\u003c\/strong\u003e package. The innovative flex tower is a complete package to create a single mount for disc jockey lights, speakers or various other display uses.\u003c\/p\u003e\u003cp\u003eThis package comes with everything you need to make a single 2 meter (6.56 ft) platform or a 1 meter (3.2 ft) tower.  Tidy up the look with the black scrim sleeve or up-light the white scrim sleeve for a custom color effect.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cspan\u003eThis package includes a \u003c\/span\u003e\u003cstrong\u003eSOFT CARRYING BAG!\u003c\/strong\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e(4) 12\" 1M 3.28ft I Beam Truss\u003c\/li\u003e\n\u003cli\u003e(1) 12\" x 12\" Top Plate\u003c\/li\u003e\n\u003cli\u003e(1) Speaker Mount Stud for 12” Top Plate\u003c\/li\u003e\n\u003cli\u003e(1) 24\" x 24\" Folding Base Plate\u003c\/li\u003e\n\u003cli\u003e(8) Half Conical Connectors with Pins\u003c\/li\u003e\n\u003cli\u003e(2) Truss Sleeves in Black and White\u003c\/li\u003e\n\u003cli\u003e(1) Soft Carry Bag that fits all parts (Bag Dimensions 41” L x 13” W x 13” L\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e41.00\"L x 12.50\"W x\t9.00\"H\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 48.00 lbs\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShipping Dimensions\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e47.00\"L x 14.00\"D x\t12.00\"H\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eShipping Weight: 53.00 lbs\u003c\/span\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eIMPORTANT NOTE: \u003c\/b\u003e \u003cbr\u003eItem is original and sealed. \u003cbr\u003eShipped directly from Manufacturer.\u003cbr\u003eWith Full Manufacturer Warranty.\u003cbr\u003eRestocking fee: 15.00%\u003c\/p\u003e\u003cbr\u003e"}
$896.50
Quick View {"id":1582881964132,"title":"Neutrik NE8FDX-Y6-B Black Cable Mount Cat 6A connector (50 pcs)","handle":"ne8fdx-y6-b","description":"Neutrik NE8FDX-Y6-B black cable mount Cat 6A connector. \u003cspan\u003e(50 pcs)\u003c\/span\u003e  \u003cbr\u003e\u003cbr\u003eNot compatible with their Cat 6 series of connectors \u003cbr\u003e\u003cbr\u003e---\u003cbr\u003e\u003cp\u003eD-shape CAT6A panel connector, shielded, IDC termination, black housing\u003c\/p\u003e\u003cp\u003eAttention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.\u003c\/p\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eRuggedized connector with CAT6A component compliance according to ISO\/IEC 11801 and TIA\/EIA 568-C.2\u003c\/li\u003e\n\u003cli\u003ePoE+ compliant according to 802.3at Type2\u003c\/li\u003e\n\u003cli\u003eRugged latch lock system million fold proven\u003c\/li\u003e\n\u003cli\u003eIntermateable with the existing etherCON CAT5 range\u003c\/li\u003e\n\u003cli\u003eShielded system - high noise immunity and EMI protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e","published_at":"2018-11-30T04:19:00-06:00","created_at":"2018-11-30T04:19:01-06:00","vendor":"Neutrik","type":"parts","tags":["parts"],"price":89650,"price_min":89650,"price_max":89650,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15139048587364,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NE8FDX-Y6-B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neutrik NE8FDX-Y6-B Black Cable Mount Cat 6A connector (50 pcs)","public_title":null,"options":["Default Title"],"price":89650,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/tbcrijlftlrrmcwhfgim.jpg?v=1543573141"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/tbcrijlftlrrmcwhfgim.jpg?v=1543573141","options":["Title"],"content":"Neutrik NE8FDX-Y6-B black cable mount Cat 6A connector. \u003cspan\u003e(50 pcs)\u003c\/span\u003e  \u003cbr\u003e\u003cbr\u003eNot compatible with their Cat 6 series of connectors \u003cbr\u003e\u003cbr\u003e---\u003cbr\u003e\u003cp\u003eD-shape CAT6A panel connector, shielded, IDC termination, black housing\u003c\/p\u003e\u003cp\u003eAttention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.\u003c\/p\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eRuggedized connector with CAT6A component compliance according to ISO\/IEC 11801 and TIA\/EIA 568-C.2\u003c\/li\u003e\n\u003cli\u003ePoE+ compliant according to 802.3at Type2\u003c\/li\u003e\n\u003cli\u003eRugged latch lock system million fold proven\u003c\/li\u003e\n\u003cli\u003eIntermateable with the existing etherCON CAT5 range\u003c\/li\u003e\n\u003cli\u003eShielded system - high noise immunity and EMI protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e"}
$800.00
Quick View {"id":1582881570916,"title":"Neutrik NE8FDX-Y6 etherCON chassis CAT6A, shielded IDC, nickel plating (50 pcs)","handle":"ne8fdx-y6","description":"Neutrik NE8FDX-Y6 etherCON chassis CAT6A, shielded IDC, nickel plating (50 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003eD-shape CAT6A panel connector, shielded, IDC termination, nickel housing\u003c\/p\u003e\n\u003cp\u003eAttention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eRuggedized connector with CAT6A component compliance according to ISO\/IEC 11801 and TIA\/EIA 568-C.2\u003c\/li\u003e\n\u003cli\u003ePoE+ compliant according to 802.3at Type2\u003c\/li\u003e\n\u003cli\u003eRugged latch lock system million fold proven\u003c\/li\u003e\n\u003cli\u003eIntermateable with the existing etherCON CAT5 range\u003c\/li\u003e\n\u003cli\u003eShielded system - high noise immunity and EMI protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e","published_at":"2018-11-30T04:18:58-06:00","created_at":"2018-11-30T04:18:58-06:00","vendor":"Neutrik","type":"parts","tags":["parts"],"price":80000,"price_min":80000,"price_max":80000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15139042000996,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NE8FDX-Y6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neutrik NE8FDX-Y6 etherCON chassis CAT6A, shielded IDC, nickel plating (50 pcs)","public_title":null,"options":["Default Title"],"price":80000,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/dp6pdppqatyoii5peg2b.jpg?v=1543573139"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/dp6pdppqatyoii5peg2b.jpg?v=1543573139","options":["Title"],"content":"Neutrik NE8FDX-Y6 etherCON chassis CAT6A, shielded IDC, nickel plating (50 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003eD-shape CAT6A panel connector, shielded, IDC termination, nickel housing\u003c\/p\u003e\n\u003cp\u003eAttention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eRuggedized connector with CAT6A component compliance according to ISO\/IEC 11801 and TIA\/EIA 568-C.2\u003c\/li\u003e\n\u003cli\u003ePoE+ compliant according to 802.3at Type2\u003c\/li\u003e\n\u003cli\u003eRugged latch lock system million fold proven\u003c\/li\u003e\n\u003cli\u003eIntermateable with the existing etherCON CAT5 range\u003c\/li\u003e\n\u003cli\u003eShielded system - high noise immunity and EMI protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e"}
$916.50
Quick View {"id":1582881800292,"title":"Neutrik NE8FDX-P6-W etherCON chassis CAT6A, shielded feedthrough with rubber sealing, IP65 (50 pcs)","handle":"ne8fdx-p6-w","description":"Neutrik NE8FDX-P6-W etherCON chassis CAT6A, shielded feedthrough with rubber sealing, IP65 (50 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003eD-shape CAT6A panel connector, shielded, feedthrough, with rubber sealing, IP65 when mated, nickel housing\u003c\/p\u003e\n\u003cp\u003eAttention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eRuggedized connector with CAT6A component compliance according to ISO\/IEC 11801 and TIA\/EIA 568-C.2\u003c\/li\u003e\n\u003cli\u003ePoE+ compliant according to 802.3at Type2\u003c\/li\u003e\n\u003cli\u003eRugged latch lock system million fold proven\u003c\/li\u003e\n\u003cli\u003eIP65 ingress protection in mated condition and unmated when sealing cap is closed\u003c\/li\u003e\n\u003cli\u003eIntermateable with the existing etherCON CAT5 range\u003c\/li\u003e\n\u003cli\u003eShielded system - high noise immunity and EMI protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e","published_at":"2018-11-30T04:18:59-06:00","created_at":"2018-11-30T04:18:59-06:00","vendor":"Neutrik","type":"parts","tags":["parts"],"price":91650,"price_min":91650,"price_max":91650,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15139046096996,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NE8FDX-P6-W","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neutrik NE8FDX-P6-W etherCON chassis CAT6A, shielded feedthrough with rubber sealing, IP65 (50 pcs)","public_title":null,"options":["Default Title"],"price":91650,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/rm6ka3bm7qvu7hrehokj.jpg?v=1543573140"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/rm6ka3bm7qvu7hrehokj.jpg?v=1543573140","options":["Title"],"content":"Neutrik NE8FDX-P6-W etherCON chassis CAT6A, shielded feedthrough with rubber sealing, IP65 (50 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003eD-shape CAT6A panel connector, shielded, feedthrough, with rubber sealing, IP65 when mated, nickel housing\u003c\/p\u003e\n\u003cp\u003eAttention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eRuggedized connector with CAT6A component compliance according to ISO\/IEC 11801 and TIA\/EIA 568-C.2\u003c\/li\u003e\n\u003cli\u003ePoE+ compliant according to 802.3at Type2\u003c\/li\u003e\n\u003cli\u003eRugged latch lock system million fold proven\u003c\/li\u003e\n\u003cli\u003eIP65 ingress protection in mated condition and unmated when sealing cap is closed\u003c\/li\u003e\n\u003cli\u003eIntermateable with the existing etherCON CAT5 range\u003c\/li\u003e\n\u003cli\u003eShielded system - high noise immunity and EMI protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e"}
$796.50
Quick View {"id":1582881439844,"title":"Neutrik NE8FDX-P6 etherCON chassis CAT6A, shielded feedthrough, nickel plating (50 pcs)","handle":"ne8fdx-p6","description":"Neutrik etherCON chassis CAT6A, shielded feedthrough, nickel plating (50 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003eD-shape CAT6A panel connector, shielded, feedthrough, Nickel housing\u003c\/p\u003e\n\u003cp\u003eAttention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eRuggedized connector with CAT6A component compliance according to ISO\/IEC 11801 and TIA\/EIA 568-C.2\u003c\/li\u003e\n\u003cli\u003ePoE+ compliant according to 802.3at Type2\u003c\/li\u003e\n\u003cli\u003eRugged latch lock system million fold proven\u003c\/li\u003e\n\u003cli\u003eIntermateable with the existing etherCON CAT5 range\u003c\/li\u003e\n\u003cli\u003eShielded system - high noise immunity and EMI protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e","published_at":"2018-11-30T04:18:57-06:00","created_at":"2018-11-30T04:18:57-06:00","vendor":"Neutrik","type":"parts","tags":["parts"],"price":79650,"price_min":79650,"price_max":79650,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15139037610084,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NE8FDX-P6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neutrik NE8FDX-P6 etherCON chassis CAT6A, shielded feedthrough, nickel plating (50 pcs)","public_title":null,"options":["Default Title"],"price":79650,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/d8fc6c9tlqduuwmpuhnr.jpg?v=1543573138"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/d8fc6c9tlqduuwmpuhnr.jpg?v=1543573138","options":["Title"],"content":"Neutrik etherCON chassis CAT6A, shielded feedthrough, nickel plating (50 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003eD-shape CAT6A panel connector, shielded, feedthrough, Nickel housing\u003c\/p\u003e\n\u003cp\u003eAttention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eRuggedized connector with CAT6A component compliance according to ISO\/IEC 11801 and TIA\/EIA 568-C.2\u003c\/li\u003e\n\u003cli\u003ePoE+ compliant according to 802.3at Type2\u003c\/li\u003e\n\u003cli\u003eRugged latch lock system million fold proven\u003c\/li\u003e\n\u003cli\u003eIntermateable with the existing etherCON CAT5 range\u003c\/li\u003e\n\u003cli\u003eShielded system - high noise immunity and EMI protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e"}
$643.00
Quick View {"id":1582880587876,"title":"Neutrik NC4FD-LX-M3 4 pole female receptacle (100 pcs)","handle":"nc4fd-lx-m3","description":"Neutrik NC4FD-LX-M3 4 pole female receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes (100 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003e4 pole female receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes\u003c\/p\u003e\n\u003cp\u003eThe DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eAll metal housing offers best overall RF protection and electromagnetic shielding\u003c\/li\u003e\n\u003cli\u003eDuplex ground contact for excellent contact integrity between chassis and cable connector\u003c\/li\u003e\n\u003cli\u003eFemale contact incorporates a solder barrier to prevent solder running into the contact mating area\u003c\/li\u003e\n\u003cli\u003eLarger solder contacts for easier termination\u003c\/li\u003e\n\u003cli\u003eOptional connection to easily join pin1 to chassis ground\u003c\/li\u003e\n\u003cli\u003eD-style housing provides installation compatibility with industry standard D mounting dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e","published_at":"2018-11-30T04:18:52-06:00","created_at":"2018-11-30T04:18:53-06:00","vendor":"Neutrik","type":"parts","tags":["parts"],"price":64300,"price_min":64300,"price_max":64300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15139030990948,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NC4FD-LX-M3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neutrik NC4FD-LX-M3 4 pole female receptacle (100 pcs)","public_title":null,"options":["Default Title"],"price":64300,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/scb8w6lj2mcmsg0jjkkn.jpg?v=1543573133"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/scb8w6lj2mcmsg0jjkkn.jpg?v=1543573133","options":["Title"],"content":"Neutrik NC4FD-LX-M3 4 pole female receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes (100 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003e4 pole female receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes\u003c\/p\u003e\n\u003cp\u003eThe DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eAll metal housing offers best overall RF protection and electromagnetic shielding\u003c\/li\u003e\n\u003cli\u003eDuplex ground contact for excellent contact integrity between chassis and cable connector\u003c\/li\u003e\n\u003cli\u003eFemale contact incorporates a solder barrier to prevent solder running into the contact mating area\u003c\/li\u003e\n\u003cli\u003eLarger solder contacts for easier termination\u003c\/li\u003e\n\u003cli\u003eOptional connection to easily join pin1 to chassis ground\u003c\/li\u003e\n\u003cli\u003eD-style housing provides installation compatibility with industry standard D mounting dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e"}
$565.00
Quick View {"id":1582880260196,"title":"Neutrik NC3MD-LX-WT XLR 3Pole receptacle, male, White Housing, Silver Contacts (100 pcs)","handle":"nc3md-lx-wt","description":"Neutrik NC3MD-LX-WT XLR 3Pole receptacle, male, White Housing, Silver Contacts (100 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003e3 pole male receptacle, solder cups, white painted housing, silver contacts\u003c\/p\u003e\n\u003cp\u003eThe DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding. It is the ideal match for mating with Neutrik's EMC XLR cable connector.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eAll metal housing offers best overall RF protection and electromagnetic shielding\u003c\/li\u003e\n\u003cli\u003eDuplex ground contact for excellent contact integrity between chassis and cable connector\u003c\/li\u003e\n\u003cli\u003eMale connector's retention bar replaces plastic design with all metal version improving pull-out force\u003c\/li\u003e\n\u003cli\u003eLarger solder contacts for easier termination\u003c\/li\u003e\n\u003cli\u003eOptional connection to easily join pin1 to chassis ground\u003c\/li\u003e\n\u003cli\u003eD-style housing provides installation compatibility with industry standard D mounting dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e","published_at":"2018-11-30T04:18:50-06:00","created_at":"2018-11-30T04:18:50-06:00","vendor":"Neutrik","type":"parts","tags":["parts"],"price":56500,"price_min":56500,"price_max":56500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15139023192164,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NC3MD-LX-WT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neutrik NC3MD-LX-WT XLR 3Pole receptacle, male, White Housing, Silver Contacts (100 pcs)","public_title":null,"options":["Default Title"],"price":56500,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/n8vrdgu6cmnmvib8nxna.jpg?v=1543573131"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/n8vrdgu6cmnmvib8nxna.jpg?v=1543573131","options":["Title"],"content":"Neutrik NC3MD-LX-WT XLR 3Pole receptacle, male, White Housing, Silver Contacts (100 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003e3 pole male receptacle, solder cups, white painted housing, silver contacts\u003c\/p\u003e\n\u003cp\u003eThe DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding. It is the ideal match for mating with Neutrik's EMC XLR cable connector.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eAll metal housing offers best overall RF protection and electromagnetic shielding\u003c\/li\u003e\n\u003cli\u003eDuplex ground contact for excellent contact integrity between chassis and cable connector\u003c\/li\u003e\n\u003cli\u003eMale connector's retention bar replaces plastic design with all metal version improving pull-out force\u003c\/li\u003e\n\u003cli\u003eLarger solder contacts for easier termination\u003c\/li\u003e\n\u003cli\u003eOptional connection to easily join pin1 to chassis ground\u003c\/li\u003e\n\u003cli\u003eD-style housing provides installation compatibility with industry standard D mounting dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e"}
$965.00
Quick View {"id":1582879506532,"title":"Neutrik NBB75DFIX Isolated UHD BNC chassis connector, D-shape housing (100 pcs)","handle":"nbb75dfix","description":"Neutrik NBB75DFIX Isolated UHD BNC chassis connector, feedthrough in antraloy plated D-shape housing (100 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003eIsolated UHD BNC chassis connector, feedthrough in antraloy plated D-shape housing\u003c\/p\u003e\n\u003cp\u003eNeutrik's UHD BNC chassis connectors offer low return loss values at high frequencies specific for high resolution video signal transmission. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use and is in addition recessed and therefore well protected in a D-shape housing.\u003c\/p\u003e\n\u003cbr\u003e  \u003cbr\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eOptimized gold plated cage type center contact for UHD signals as 4K or 8K\u003c\/li\u003e\n\u003cli\u003eSwiss black chrome plating\u003c\/li\u003e\n\u003cli\u003eGrounded panel mount\u003c\/li\u003e\n\u003cli\u003eStandard D-shape housing provides flush mounting and protection from damage\u003c\/li\u003e\n\u003cli\u003eColor coding possible\u003c\/li\u003e\n\u003cli\u003eFully compatible with conventional BNC cable connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Optimized Return Loss \u003cp\u003eDue to optimized insulator design the Neutrik rearTWIST UHD BNC chassis connector achieves increased headroom compared to conventional BNC connectors and offers additional return loss reserve for potential impedance deviations resulting from cable bending, incorrect connector assembly or faulty connection interfaces without signal interruption.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e New cage type contact \u003cul\u003e\n\u003cli\u003eClosed contact design - extremely robust\u003c\/li\u003e\n\u003cli\u003eGold plated cage type clip - best possible shielding and lowest contact resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e","published_at":"2018-11-30T04:18:46-06:00","created_at":"2018-11-30T04:18:47-06:00","vendor":"Neutrik","type":"parts","tags":["parts"],"price":96500,"price_min":96500,"price_max":96500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15139011002468,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NBB75DFIX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neutrik NBB75DFIX Isolated UHD BNC chassis connector, D-shape housing (100 pcs)","public_title":null,"options":["Default Title"],"price":96500,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/kuyj6nmyci5hq71xxcyq.jpg?v=1543573127"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/kuyj6nmyci5hq71xxcyq.jpg?v=1543573127","options":["Title"],"content":"Neutrik NBB75DFIX Isolated UHD BNC chassis connector, feedthrough in antraloy plated D-shape housing (100 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003eIsolated UHD BNC chassis connector, feedthrough in antraloy plated D-shape housing\u003c\/p\u003e\n\u003cp\u003eNeutrik's UHD BNC chassis connectors offer low return loss values at high frequencies specific for high resolution video signal transmission. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use and is in addition recessed and therefore well protected in a D-shape housing.\u003c\/p\u003e\n\u003cbr\u003e  \u003cbr\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eOptimized gold plated cage type center contact for UHD signals as 4K or 8K\u003c\/li\u003e\n\u003cli\u003eSwiss black chrome plating\u003c\/li\u003e\n\u003cli\u003eGrounded panel mount\u003c\/li\u003e\n\u003cli\u003eStandard D-shape housing provides flush mounting and protection from damage\u003c\/li\u003e\n\u003cli\u003eColor coding possible\u003c\/li\u003e\n\u003cli\u003eFully compatible with conventional BNC cable connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Optimized Return Loss \u003cp\u003eDue to optimized insulator design the Neutrik rearTWIST UHD BNC chassis connector achieves increased headroom compared to conventional BNC connectors and offers additional return loss reserve for potential impedance deviations resulting from cable bending, incorrect connector assembly or faulty connection interfaces without signal interruption.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e New cage type contact \u003cul\u003e\n\u003cli\u003eClosed contact design - extremely robust\u003c\/li\u003e\n\u003cli\u003eGold plated cage type clip - best possible shielding and lowest contact resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e"}
$920.00
Quick View {"id":1582879244388,"title":"Neutrik NBB75DFGX Grounded UHD BNC Chassis Connector, antraloy plated D-shape housing (100 pcs)","handle":"nbb75dfgx","description":"Neutrik NBB75DFGX grounded UHD BNC chassis connector, feedthrough in antraloy plated D-shape housing (100 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003eGrounded UHD BNC chassis connector, feedthrough in antraloy plated D-shape housing\u003c\/p\u003e\n\u003cp\u003eNeutrik's UHD BNC chassis connectors offer low return loss values at high frequencies specific for high resolution video signal transmission. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use and is in addition recessed and therefore well protected in a D-shape housing\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eOptimized gold plated cage type center contact for UHD signals as 4K or 8K\u003c\/li\u003e\n\u003cli\u003eSwiss black chrome plating\u003c\/li\u003e\n\u003cli\u003eGrounded panel mount\u003c\/li\u003e\n\u003cli\u003eStandard D-shape housing provides flush mounting and protection from damage\u003c\/li\u003e\n\u003cli\u003eColor coding possible\u003c\/li\u003e\n\u003cli\u003eFully compatible with conventional BNC cable connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e","published_at":"2018-11-30T04:18:45-06:00","created_at":"2018-11-30T04:18:46-06:00","vendor":"Neutrik","type":"parts","tags":["parts"],"price":92000,"price_min":92000,"price_max":92000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15139006808164,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NBB75DFGX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neutrik NBB75DFGX Grounded UHD BNC Chassis Connector, antraloy plated D-shape housing (100 pcs)","public_title":null,"options":["Default Title"],"price":92000,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/bek4mtyeb5fzw2vxu7h9.png?v=1543573126"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/bek4mtyeb5fzw2vxu7h9.png?v=1543573126","options":["Title"],"content":"Neutrik NBB75DFGX grounded UHD BNC chassis connector, feedthrough in antraloy plated D-shape housing (100 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003eGrounded UHD BNC chassis connector, feedthrough in antraloy plated D-shape housing\u003c\/p\u003e\n\u003cp\u003eNeutrik's UHD BNC chassis connectors offer low return loss values at high frequencies specific for high resolution video signal transmission. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use and is in addition recessed and therefore well protected in a D-shape housing\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eOptimized gold plated cage type center contact for UHD signals as 4K or 8K\u003c\/li\u003e\n\u003cli\u003eSwiss black chrome plating\u003c\/li\u003e\n\u003cli\u003eGrounded panel mount\u003c\/li\u003e\n\u003cli\u003eStandard D-shape housing provides flush mounting and protection from damage\u003c\/li\u003e\n\u003cli\u003eColor coding possible\u003c\/li\u003e\n\u003cli\u003eFully compatible with conventional BNC cable connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e"}
$913.00
Quick View {"id":1582879080548,"title":"Neutrik NBB75DFG Grounded BNC chassis connector, feedthrough in nickel D-shape housing (100 pcs)","handle":"nbb75dfg","description":"Neutrik NBB75DFG Grounded BNC chassis connector, feedthrough in nickel D-shape housing (100 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003eGrounded BNC chassis connector, feedthrough in nickel D-shape housing\u003c\/p\u003e\n\u003cp\u003eNeutrik's BNC chassis connectors offer a true 75 Ω design for serial and digital (HD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use and is in addition recessed and therefore well protected in a D-shape housing (audio industry standard).\u003c\/p\u003e\n\u003cbr\u003e  \u003cbr\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eGold plated cage type center contact\u003c\/li\u003e\n\u003cli\u003eTrue 75 Ω design meets the stringent HD requirements\u003c\/li\u003e\n\u003cli\u003eGrounded panel mount\u003c\/li\u003e\n\u003cli\u003eStandard D-shape housing - provides flush mounting and protection from demage\u003c\/li\u003e\n\u003cli\u003eColor coding possible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003c\/div\u003e New cage type contact \u003cul\u003e\n\u003cli\u003eClosed contact design - extremely robust\u003c\/li\u003e\n\u003cli\u003eGold plated cage type clip - best possible shielding and lowest contact resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e","published_at":"2018-11-30T04:18:44-06:00","created_at":"2018-11-30T04:18:44-06:00","vendor":"Neutrik","type":"parts","tags":["parts"],"price":91300,"price_min":91300,"price_max":91300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15139005104228,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NBB75DFG","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neutrik NBB75DFG Grounded BNC chassis connector, feedthrough in nickel D-shape housing (100 pcs)","public_title":null,"options":["Default Title"],"price":91300,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/suetilltudf9fab8jnno.jpg?v=1543573125"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/suetilltudf9fab8jnno.jpg?v=1543573125","options":["Title"],"content":"Neutrik NBB75DFG Grounded BNC chassis connector, feedthrough in nickel D-shape housing (100 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003eGrounded BNC chassis connector, feedthrough in nickel D-shape housing\u003c\/p\u003e\n\u003cp\u003eNeutrik's BNC chassis connectors offer a true 75 Ω design for serial and digital (HD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use and is in addition recessed and therefore well protected in a D-shape housing (audio industry standard).\u003c\/p\u003e\n\u003cbr\u003e  \u003cbr\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eGold plated cage type center contact\u003c\/li\u003e\n\u003cli\u003eTrue 75 Ω design meets the stringent HD requirements\u003c\/li\u003e\n\u003cli\u003eGrounded panel mount\u003c\/li\u003e\n\u003cli\u003eStandard D-shape housing - provides flush mounting and protection from demage\u003c\/li\u003e\n\u003cli\u003eColor coding possible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003c\/div\u003e New cage type contact \u003cul\u003e\n\u003cli\u003eClosed contact design - extremely robust\u003c\/li\u003e\n\u003cli\u003eGold plated cage type clip - best possible shielding and lowest contact resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e"}
$973.00
Quick View {"id":1582878556260,"title":"Neutrik NAUSB3-B USB 3.0 type A-type B feedthrough adapter, black chrome (100 pcs)","handle":"nausb3-b","description":"Neutrik NAUSB3-B USB 3.0 type A-type B feedthrough adapter, black chrome (100 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003eReversible USB 3.0 gender changer (type A and B), black D-housing\u003c\/p\u003e\n\u003cp\u003eThe NAUSB3-B is a reversible USB 3.0 feed through adapter. The standardized D-shape housing of the adapter fits into conventional patch panels and offers an additional protection for the connector.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eUSB 3.0 feedthrough adapter\u003c\/li\u003e\n\u003cli\u003eReversible insert offering type A or B on front or rear end\u003c\/li\u003e\n\u003cli\u003eStandard D-shape housing\u003c\/li\u003e\n\u003cli\u003eRemovable screen for chassis grounding\u003c\/li\u003e\n\u003cli\u003eMeets USB 3.0 specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e USB 3.0 Performance \u003cp\u003eTo meet the USB3.0 specifications the NAUSB3* chassis contain tight tolerance pin wiring and an improved ground connection due to an additional copper film between the USB jacks. As a result the feed through adapter guarantees permanent writing and reading speed \u0026gt; 200 MB\/s.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e Gender Changeable \u003cp\u003eCertain applications require that the USB 3.0 type A or type B jack is on front to connect end devices like hard disk, cameras, etc. The connector configuration of the NAUSB3* can be changed by rotating the USB insert without special tools.\u003c\/p\u003e Optimized Ground Connection \u003cp\u003eAn additional metal lip guarantees optimum ground connection from USB 3.0 jack to the D-size flange in order to achieve a consistent ground level. To eliminate the ground connection pinch off the metal lip.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e","published_at":"2018-11-30T04:18:41-06:00","created_at":"2018-11-30T04:18:42-06:00","vendor":"Neutrik","type":"parts","tags":["parts"],"price":97300,"price_min":97300,"price_max":97300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15139002384484,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NAUSB3-B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neutrik NAUSB3-B USB 3.0 type A-type B feedthrough adapter, black chrome (100 pcs)","public_title":null,"options":["Default Title"],"price":97300,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/wu6ijnlmwluwi9qjoidp.jpg?v=1543573122"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/wu6ijnlmwluwi9qjoidp.jpg?v=1543573122","options":["Title"],"content":"Neutrik NAUSB3-B USB 3.0 type A-type B feedthrough adapter, black chrome (100 pcs)\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cp\u003eReversible USB 3.0 gender changer (type A and B), black D-housing\u003c\/p\u003e\n\u003cp\u003eThe NAUSB3-B is a reversible USB 3.0 feed through adapter. The standardized D-shape housing of the adapter fits into conventional patch panels and offers an additional protection for the connector.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e Features \u0026amp; Benefits \u003cul\u003e\n\u003cli\u003eUSB 3.0 feedthrough adapter\u003c\/li\u003e\n\u003cli\u003eReversible insert offering type A or B on front or rear end\u003c\/li\u003e\n\u003cli\u003eStandard D-shape housing\u003c\/li\u003e\n\u003cli\u003eRemovable screen for chassis grounding\u003c\/li\u003e\n\u003cli\u003eMeets USB 3.0 specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e USB 3.0 Performance \u003cp\u003eTo meet the USB3.0 specifications the NAUSB3* chassis contain tight tolerance pin wiring and an improved ground connection due to an additional copper film between the USB jacks. As a result the feed through adapter guarantees permanent writing and reading speed \u0026gt; 200 MB\/s.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e Gender Changeable \u003cp\u003eCertain applications require that the USB 3.0 type A or type B jack is on front to connect end devices like hard disk, cameras, etc. The connector configuration of the NAUSB3* can be changed by rotating the USB insert without special tools.\u003c\/p\u003e Optimized Ground Connection \u003cp\u003eAn additional metal lip guarantees optimum ground connection from USB 3.0 jack to the D-size flange in order to achieve a consistent ground level. To eliminate the ground connection pinch off the metal lip.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e"}