Pro Audio

Filter
View
Showing 1 - 16 of 512 Items
SPECIAL ORDER
Quick View {"id":3414400073828,"title":"dbx goRack Performance Processor","handle":"dbxgorack-v-04-u","description":"Features:\u003cbr\u003e- Compact Form Factor\u003cbr\u003e- Anti-Feedback Processing based on the dbx AFS™ (Advanced Feedback Suppression) algorithm\u003cbr\u003e- dbx Compression (based on the dbx 163)\u003cbr\u003e- Subharmonic Synthesis\u003cbr\u003e- EQ (16 Musical Genre-Based 31-Band Graphic EQ Settings)\u003cbr\u003e- Dual dbx Microphone Preamp\/Line Inputs\u003cbr\u003e- Selectable Mic\/Line Input Settings\u003cbr\u003e- Stereo Inputs and Outputs\u003cbr\u003e- Combination Mic\/Line Input Jacks and XLR Outputs\u003cbr\u003e- 1\/8\" Stereo Aux Input for Mobile Music Players\/Devices\u003cbr\u003e- Independent Left and Right Channel Volume Controls\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003eMic\/Line Inputs: 2, independently switchable between mic or line level\u003cbr\u003eMic\/Line Input Connectors: Female ¼” - XLR combination\u003cbr\u003eMic\/Line Input Type: Electronically balanced, RF filtered\u003cbr\u003eMic\/Line Input Impedance: Switch set to MIC: 2 kΩ balanced, Switch set to LINE: 22 kΩ balanced\u003cbr\u003eMic\/Line Input Max. Gain: Switch set to MIC: 48 dB, Switch set to LINE: 5 dB\u003cbr\u003eMic\/Line Input Max. Input Level: Switch set to MIC: 0 dBu, Switch set to LINE: +20 dBu\u003cbr\u003eMic\/Line Input CMRR: \u0026gt; 45 dB\u003cbr\u003eAux Input: 1\u003cbr\u003eAux Input Connector: Female stereo 1\/8” (3.5 mm) TRS mini\u003cbr\u003eAux Input Type: Unbalanced, RF filtered\u003cbr\u003eAux Input Impedance: 20 kΩ\u003cbr\u003eAux Input Max. Input Level: +20 dBu\u003cbr\u003eOutputs: 2 line outputs\u003cbr\u003eOutput Connectors: Male XLR\u003cbr\u003eOutput Type: Impedance balanced, RF filtered\u003cbr\u003eOutput Impedance: 40 Ω\u003cbr\u003eMaximum Output Level: +14 dBu\u003cbr\u003eMic\/Line A\/D and D\/A Converters: 24-bit\u003cbr\u003eMic\/Line A\/D and D\/A Dynamic Range: 115 dB A-weighted\u003cbr\u003eAux Input D\/A Converter: 24-bit\u003cbr\u003eAux Input D\/A Dynamic Range: 106 dB A-weighted\u003cbr\u003eInternal Processing Wordlength: 32-bit floating point\u003cbr\u003eSample Rate: 48 kHz\u003cbr\u003eDynamic Range: 103.5 dB A-weighted, 102.5 dB unweighted\u003cbr\u003eTHD+Noise: 0.04% typical at 0 dBu in\/out, 1 kHz\u003cbr\u003eFrequency Response: 20 Hz – 20 kHz, +0 \/- 0.5 dB\u003cbr\u003eInterchannel Crosstalk: \u0026lt; -80 dB, -84 dB typical\u003cbr\u003eLatency: Input to output: 3.4 ms\u003cbr\u003ePower Supply: PS0913DC-04 (9 VDC)\u003cbr\u003eOperating Voltage: 100-240 VAC, 50\/60 Hz\u003cbr\u003ePower Consumption: 4.5 Watts (500 mA)\u003cbr\u003eUnit Weight: 1.2 lbs. (0.54 kg)\u003cbr\u003eShipping Weight: 2.04 lbs. (0.93 kg)\u003cbr\u003eDimensions: 6.1” (L) x 4.1” (W) x 1.69” (H), 154.9 mm (L) x 104.1 mm (W) x 42.9 mm (H)","published_at":"2019-05-01T09:07:19-05:00","created_at":"2019-05-01T09:07:20-05:00","vendor":"dbx","type":"pro audio","tags":["pro-audio"],"price":8499,"price_min":8499,"price_max":8499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":26946771615844,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DBXGORACK-V-04","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"dbx goRack Performance Processor","public_title":null,"options":["Default Title"],"price":8499,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/wl9difm3boiq6kqlrthv.jpg?v=1556719640"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/wl9difm3boiq6kqlrthv.jpg?v=1556719640","options":["Title"],"content":"Features:\u003cbr\u003e- Compact Form Factor\u003cbr\u003e- Anti-Feedback Processing based on the dbx AFS™ (Advanced Feedback Suppression) algorithm\u003cbr\u003e- dbx Compression (based on the dbx 163)\u003cbr\u003e- Subharmonic Synthesis\u003cbr\u003e- EQ (16 Musical Genre-Based 31-Band Graphic EQ Settings)\u003cbr\u003e- Dual dbx Microphone Preamp\/Line Inputs\u003cbr\u003e- Selectable Mic\/Line Input Settings\u003cbr\u003e- Stereo Inputs and Outputs\u003cbr\u003e- Combination Mic\/Line Input Jacks and XLR Outputs\u003cbr\u003e- 1\/8\" Stereo Aux Input for Mobile Music Players\/Devices\u003cbr\u003e- Independent Left and Right Channel Volume Controls\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003eMic\/Line Inputs: 2, independently switchable between mic or line level\u003cbr\u003eMic\/Line Input Connectors: Female ¼” - XLR combination\u003cbr\u003eMic\/Line Input Type: Electronically balanced, RF filtered\u003cbr\u003eMic\/Line Input Impedance: Switch set to MIC: 2 kΩ balanced, Switch set to LINE: 22 kΩ balanced\u003cbr\u003eMic\/Line Input Max. Gain: Switch set to MIC: 48 dB, Switch set to LINE: 5 dB\u003cbr\u003eMic\/Line Input Max. Input Level: Switch set to MIC: 0 dBu, Switch set to LINE: +20 dBu\u003cbr\u003eMic\/Line Input CMRR: \u0026gt; 45 dB\u003cbr\u003eAux Input: 1\u003cbr\u003eAux Input Connector: Female stereo 1\/8” (3.5 mm) TRS mini\u003cbr\u003eAux Input Type: Unbalanced, RF filtered\u003cbr\u003eAux Input Impedance: 20 kΩ\u003cbr\u003eAux Input Max. Input Level: +20 dBu\u003cbr\u003eOutputs: 2 line outputs\u003cbr\u003eOutput Connectors: Male XLR\u003cbr\u003eOutput Type: Impedance balanced, RF filtered\u003cbr\u003eOutput Impedance: 40 Ω\u003cbr\u003eMaximum Output Level: +14 dBu\u003cbr\u003eMic\/Line A\/D and D\/A Converters: 24-bit\u003cbr\u003eMic\/Line A\/D and D\/A Dynamic Range: 115 dB A-weighted\u003cbr\u003eAux Input D\/A Converter: 24-bit\u003cbr\u003eAux Input D\/A Dynamic Range: 106 dB A-weighted\u003cbr\u003eInternal Processing Wordlength: 32-bit floating point\u003cbr\u003eSample Rate: 48 kHz\u003cbr\u003eDynamic Range: 103.5 dB A-weighted, 102.5 dB unweighted\u003cbr\u003eTHD+Noise: 0.04% typical at 0 dBu in\/out, 1 kHz\u003cbr\u003eFrequency Response: 20 Hz – 20 kHz, +0 \/- 0.5 dB\u003cbr\u003eInterchannel Crosstalk: \u0026lt; -80 dB, -84 dB typical\u003cbr\u003eLatency: Input to output: 3.4 ms\u003cbr\u003ePower Supply: PS0913DC-04 (9 VDC)\u003cbr\u003eOperating Voltage: 100-240 VAC, 50\/60 Hz\u003cbr\u003ePower Consumption: 4.5 Watts (500 mA)\u003cbr\u003eUnit Weight: 1.2 lbs. (0.54 kg)\u003cbr\u003eShipping Weight: 2.04 lbs. (0.93 kg)\u003cbr\u003eDimensions: 6.1” (L) x 4.1” (W) x 1.69” (H), 154.9 mm (L) x 104.1 mm (W) x 42.9 mm (H)"}
SPECIAL ORDER
Quick View {"id":2843156578404,"title":"BSS BLUAEC-IN | Acoustic Echo Cancellation Card","handle":"bssbluaecin-m","description":"\u003cb\u003eBSS BLUAEC-IN | Acoustic Echo Cancellation Card\u003c\/b\u003e\u003cbr\u003eThe Soundweb London Acoustic Echo Cancellation (AEC) Input Cards are designed to populate any of the four card slots on Soundweb London BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160 and BLU-120 devices. These AEC Input Cards enable Soundweb London devices to cancel acoustic echo arising when sound from a loudspeaker enters a microphone in the same room in a conference application.\u003cbr\u003e\u003cbr\u003eLike the Soundweb London Analog Input Cards, the Soundweb London AEC Input Cards offer Phantom Power, configurable per channel and software controlled analog gain in 6dB steps from 0dB to 48dB.\u003cbr\u003e\u003cbr\u003eThey offer four independent channels of AEC which can be freely configured in software and individual AEC references allowing users to provide a solution for multiple spaces using a single device.\u003cbr\u003e\u003cbr\u003eKey Features:\u003cbr\u003eCompatible with BLU-800, BLU-320, BLU-160 and BLU-120 Devices\u003cbr\u003ePhantom Power (Configurable per Channel)\u003cbr\u003eSoftware Controlled Analog Gain (0dB to 48dB, 6dB steps)\u003cbr\u003eFour Independent Channels of AEC\u003cbr\u003eIndividual Reference per Channel\u003cbr\u003eAutomatic Gain Control (AGC)\u003cbr\u003eNoise Cancellation (NC)\u003cbr\u003eNon-Linear Processing (NLP)\u003cbr\u003eDirect Microphone Feed for Local Sound Reinforcement\u003cbr\u003e\u003cbr\u003eTechnical Specifications:\u003cbr\u003eAnalog Inputs: Up to 16 electronically balanced on Phoenix\/Combicon removable screw connectors\u003cbr\u003eMic\/Line Inputs: Nominal gain 0dB, electronically switchable up to +48dB, in +6dB steps\u003cbr\u003eInput Impedance: 3.5kΩ\u003cbr\u003eMaximum Input Level: +20dBu with 0dB input gain, +8dBu with 12dB gain\u003cbr\u003eCMRR: \u0026gt;75dB at 1kHz\u003cbr\u003eInput Noise (E.I.N.): \u0026lt;-128dBu typical with 150Ω source\u003cbr\u003ePhantom Power: 48V nominal, selectable per input\u003cbr\u003ePre-AEC Input Latency: 38\/Fs [0.79ms@48k]\u003cbr\u003ePost-AEC Input Latency (Original 8k Algorithm): 2385\/Fs [49.68ms@48k]\u003cbr\u003ePost-AEC Input Latency (Full Bandwidth Algorithm): 1609\/Fs [33.52ms@48k]\u003cbr\u003eTail Length: 200 ms\u003cbr\u003eAverage Convergence Rate: 49dB\/s (Net convergence over multiple FFT bands)\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e","published_at":"2019-02-19T02:29:43-06:00","created_at":"2019-02-19T02:29:44-06:00","vendor":"BSS","type":"pro audio","tags":["pro-audio"],"price":124800,"price_min":124800,"price_max":124800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367264301156,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BSSBLUAECIN-M","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"BSS BLUAEC-IN | Acoustic Echo Cancellation Card","public_title":null,"options":["Default Title"],"price":124800,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/yiq7sapqk5pyjfj99vfg.jpg?v=1550564984"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/yiq7sapqk5pyjfj99vfg.jpg?v=1550564984","options":["Title"],"content":"\u003cb\u003eBSS BLUAEC-IN | Acoustic Echo Cancellation Card\u003c\/b\u003e\u003cbr\u003eThe Soundweb London Acoustic Echo Cancellation (AEC) Input Cards are designed to populate any of the four card slots on Soundweb London BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160 and BLU-120 devices. These AEC Input Cards enable Soundweb London devices to cancel acoustic echo arising when sound from a loudspeaker enters a microphone in the same room in a conference application.\u003cbr\u003e\u003cbr\u003eLike the Soundweb London Analog Input Cards, the Soundweb London AEC Input Cards offer Phantom Power, configurable per channel and software controlled analog gain in 6dB steps from 0dB to 48dB.\u003cbr\u003e\u003cbr\u003eThey offer four independent channels of AEC which can be freely configured in software and individual AEC references allowing users to provide a solution for multiple spaces using a single device.\u003cbr\u003e\u003cbr\u003eKey Features:\u003cbr\u003eCompatible with BLU-800, BLU-320, BLU-160 and BLU-120 Devices\u003cbr\u003ePhantom Power (Configurable per Channel)\u003cbr\u003eSoftware Controlled Analog Gain (0dB to 48dB, 6dB steps)\u003cbr\u003eFour Independent Channels of AEC\u003cbr\u003eIndividual Reference per Channel\u003cbr\u003eAutomatic Gain Control (AGC)\u003cbr\u003eNoise Cancellation (NC)\u003cbr\u003eNon-Linear Processing (NLP)\u003cbr\u003eDirect Microphone Feed for Local Sound Reinforcement\u003cbr\u003e\u003cbr\u003eTechnical Specifications:\u003cbr\u003eAnalog Inputs: Up to 16 electronically balanced on Phoenix\/Combicon removable screw connectors\u003cbr\u003eMic\/Line Inputs: Nominal gain 0dB, electronically switchable up to +48dB, in +6dB steps\u003cbr\u003eInput Impedance: 3.5kΩ\u003cbr\u003eMaximum Input Level: +20dBu with 0dB input gain, +8dBu with 12dB gain\u003cbr\u003eCMRR: \u0026gt;75dB at 1kHz\u003cbr\u003eInput Noise (E.I.N.): \u0026lt;-128dBu typical with 150Ω source\u003cbr\u003ePhantom Power: 48V nominal, selectable per input\u003cbr\u003ePre-AEC Input Latency: 38\/Fs [0.79ms@48k]\u003cbr\u003ePost-AEC Input Latency (Original 8k Algorithm): 2385\/Fs [49.68ms@48k]\u003cbr\u003ePost-AEC Input Latency (Full Bandwidth Algorithm): 1609\/Fs [33.52ms@48k]\u003cbr\u003eTail Length: 200 ms\u003cbr\u003eAverage Convergence Rate: 49dB\/s (Net convergence over multiple FFT bands)\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843156283492,"title":"BSS BLU-103 | Conferencing Processor with AEC and VoIP","handle":"bssblu103-m","description":"\u003cb\u003eBSS BLU-103 | Conferencing Processor with AEC and VoIP\u003c\/b\u003e\u003cbr\u003eThe Soundweb London BLU-103 offers a fixed configuration of 8 analog inputs and 8 analog outputs, a Voice over IP (VoIP) interface, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e\u003cbr\u003eThe VoIP port enables the BLU-103 to interface with two VoIP (SIP v2.0 or later) lines.\u003cbr\u003e\u003cbr\u003eThe BLU-103 contains dedicated AEC processing for up to 8 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 8 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.\u003cbr\u003e\u003cbr\u003eAutomatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.\u003cbr\u003e\u003cbr\u003eThis processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.\u003cbr\u003e\u003cbr\u003eThe BLU-103 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-806, BLU-805, BLU-800, BLU-326, BLU-325, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.\u003cbr\u003e\u003cbr\u003eAnalog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.\u003cbr\u003e\u003cbr\u003ePhantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect™.\u003cbr\u003e\u003cbr\u003e12 Control Inputs and 6 Logic Outputs allow the BLU-103 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet Audio Architect.\u003cbr\u003e\u003cbr\u003eThe BLU-103 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e8 Analog Inputs (with 48v Phantom Power per Channel)\u003cbr\u003e8 Analog Outputs\u003cbr\u003eVoIP Port\u003cbr\u003eConfigurable Signal Processing\u003cbr\u003e8 Channels of AEC Processing with Auto Gain Control and Noise Cancellation\u003cbr\u003eRich Palette of Processing and Logic Objects\u003cbr\u003e48 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003cbr\u003eClear Front Panel LED Indication\u003cbr\u003eBi-Directional Locate Functionality\u003cbr\u003e12 Control Inputs and 6 Logic Outputs for GPIO Integration\u003cbr\u003eSoundweb London Interface Kit for Third Party Control System Integration (Documentation)\u003cbr\u003eHiQnet Device\u003cbr\u003eConfiguration, Control and Monitoring from HiQnet Audio Architect\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e\u003cbr\u003e","published_at":"2019-02-19T02:29:40-06:00","created_at":"2019-02-19T02:29:41-06:00","vendor":"BSS","type":"pro audio","tags":["pro-audio"],"price":352750,"price_min":352750,"price_max":352750,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367262433380,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BSSBLU103-M","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"BSS BLU-103 | Conferencing Processor with AEC and VoIP","public_title":null,"options":["Default Title"],"price":352750,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/uxg6bwfq0mksrgzfmolf.jpg?v=1550564981"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/uxg6bwfq0mksrgzfmolf.jpg?v=1550564981","options":["Title"],"content":"\u003cb\u003eBSS BLU-103 | Conferencing Processor with AEC and VoIP\u003c\/b\u003e\u003cbr\u003eThe Soundweb London BLU-103 offers a fixed configuration of 8 analog inputs and 8 analog outputs, a Voice over IP (VoIP) interface, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e\u003cbr\u003eThe VoIP port enables the BLU-103 to interface with two VoIP (SIP v2.0 or later) lines.\u003cbr\u003e\u003cbr\u003eThe BLU-103 contains dedicated AEC processing for up to 8 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 8 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.\u003cbr\u003e\u003cbr\u003eAutomatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.\u003cbr\u003e\u003cbr\u003eThis processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.\u003cbr\u003e\u003cbr\u003eThe BLU-103 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-806, BLU-805, BLU-800, BLU-326, BLU-325, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.\u003cbr\u003e\u003cbr\u003eAnalog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.\u003cbr\u003e\u003cbr\u003ePhantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect™.\u003cbr\u003e\u003cbr\u003e12 Control Inputs and 6 Logic Outputs allow the BLU-103 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet Audio Architect.\u003cbr\u003e\u003cbr\u003eThe BLU-103 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e8 Analog Inputs (with 48v Phantom Power per Channel)\u003cbr\u003e8 Analog Outputs\u003cbr\u003eVoIP Port\u003cbr\u003eConfigurable Signal Processing\u003cbr\u003e8 Channels of AEC Processing with Auto Gain Control and Noise Cancellation\u003cbr\u003eRich Palette of Processing and Logic Objects\u003cbr\u003e48 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003cbr\u003eClear Front Panel LED Indication\u003cbr\u003eBi-Directional Locate Functionality\u003cbr\u003e12 Control Inputs and 6 Logic Outputs for GPIO Integration\u003cbr\u003eSoundweb London Interface Kit for Third Party Control System Integration (Documentation)\u003cbr\u003eHiQnet Device\u003cbr\u003eConfiguration, Control and Monitoring from HiQnet Audio Architect\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e\u003cbr\u003e"}
$3,527.50
Quick View {"id":2843156152420,"title":"BSS Audio Soundweb London BLU-101 Conferencing Processor with AEC (1RU)","handle":"bssblu101m","description":"\u003cb\u003eBSS Audio Soundweb London BLU-101 Conferencing Processor with AEC (1RU)\u003c\/b\u003e\u003cbr\u003eThe Soundweb London BLU-101 offers a fixed configuration of 12 analog inputs and 8 analog outputs, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e\u003cbr\u003eThe BLU-101 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.\u003cbr\u003e\u003cbr\u003eThe BLU-101 contains dedicated AEC processing for up to 12 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 12 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.\u003cbr\u003e\u003cbr\u003eAutomatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.\u003cbr\u003e\u003cbr\u003eThis processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km. \u003cbr\u003e\u003cbr\u003eThe BLU-101 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.\u003cbr\u003e\u003cbr\u003eAnalog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.\u003cbr\u003e\u003cbr\u003ePhantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.\u003cbr\u003e\u003cbr\u003e12 Control Inputs and 6 Logic Outputs allow the BLU-101 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.\u003cbr\u003e\u003cbr\u003eThe BLU-101 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e12 Analog Inputs (with 48v Phantom Power per Channel)\u003cbr\u003e8 Analog Outputs\u003cbr\u003eConfigurable Signal Processing\u003cbr\u003e12 Channels of AEC Processing with Auto Gain Control and Noise Cancellation\u003cbr\u003eRich Palette of Processing and Logic Objects\u003cbr\u003e48 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003cbr\u003eClear Front Panel LED Indication\u003cbr\u003eBi-Directional Locate Functionality\u003cbr\u003e12 Control Inputs and 6 Logic Outputs for GPIO Integration\u003cbr\u003eSoundweb London Interface Kit for Third Party Control System Integration (Documentation)\u003cbr\u003eHiQnet Device\u003cbr\u003eConfiguration, Control and Monitoring from HiQnet London Architect\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e\u003cbr\u003e","published_at":"2019-02-19T02:29:39-06:00","created_at":"2019-02-19T02:29:40-06:00","vendor":"BSS","type":"pro audio","tags":["pro-audio"],"price":352750,"price_min":352750,"price_max":352750,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367262171236,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BSSBLU101M","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BSS Audio Soundweb London BLU-101 Conferencing Processor with AEC (1RU)","public_title":null,"options":["Default Title"],"price":352750,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/sggckps2wzlmiswe3ezv.jpg?v=1550564980"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/sggckps2wzlmiswe3ezv.jpg?v=1550564980","options":["Title"],"content":"\u003cb\u003eBSS Audio Soundweb London BLU-101 Conferencing Processor with AEC (1RU)\u003c\/b\u003e\u003cbr\u003eThe Soundweb London BLU-101 offers a fixed configuration of 12 analog inputs and 8 analog outputs, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e\u003cbr\u003eThe BLU-101 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.\u003cbr\u003e\u003cbr\u003eThe BLU-101 contains dedicated AEC processing for up to 12 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 12 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.\u003cbr\u003e\u003cbr\u003eAutomatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.\u003cbr\u003e\u003cbr\u003eThis processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km. \u003cbr\u003e\u003cbr\u003eThe BLU-101 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.\u003cbr\u003e\u003cbr\u003eAnalog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.\u003cbr\u003e\u003cbr\u003ePhantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.\u003cbr\u003e\u003cbr\u003e12 Control Inputs and 6 Logic Outputs allow the BLU-101 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.\u003cbr\u003e\u003cbr\u003eThe BLU-101 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e12 Analog Inputs (with 48v Phantom Power per Channel)\u003cbr\u003e8 Analog Outputs\u003cbr\u003eConfigurable Signal Processing\u003cbr\u003e12 Channels of AEC Processing with Auto Gain Control and Noise Cancellation\u003cbr\u003eRich Palette of Processing and Logic Objects\u003cbr\u003e48 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003cbr\u003eClear Front Panel LED Indication\u003cbr\u003eBi-Directional Locate Functionality\u003cbr\u003e12 Control Inputs and 6 Logic Outputs for GPIO Integration\u003cbr\u003eSoundweb London Interface Kit for Third Party Control System Integration (Documentation)\u003cbr\u003eHiQnet Device\u003cbr\u003eConfiguration, Control and Monitoring from HiQnet London Architect\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843156054116,"title":"BSS BLU-50 4x4 Signal Processor with BLU link","handle":"bssblu50-m","description":"\u003cb\u003eBSS BLU-50 4x4 Signal Processor with BLU link\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe BLU-50 is a half-rack width processor that offers a fixed configuration of four inputs and four outputs, configurable signal processing, logic processing and BLU link. The device can be powered with the included 12VDC power supply but can accept 12-48VDC via a terminal block connector. The BLU-50 can also be powered with PoE+ via the Ethernet port, allowing the device to be powered, configured, controlled and monitored using a single Cat 5e cable. \u003cbr\u003e\u003cbr\u003eThe analog inputs of the BLU-50 provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. \u003cbr\u003e\u003cbr\u003eThe BLU-50 features BLU link, a low latency, fault tolerant digital audio bus of 48 channels, which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber. \u003cbr\u003e\u003cbr\u003eThe BLU-50 is configured, controlled and monitored from HiQnet Audio Architect™ or HiQnet London Architect™ and is compatible with other members of the Soundweb London family. Its 48 channel BLU link bus represents channels 1-48 of the larger 256 channel BLU link bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices. Up to 60 BLU link compatible devices can share channels on a single bus. \u003cbr\u003e\u003cbr\u003eAs with other Soundweb London devices, 12 Control Inputs, six Logic Outputs and an RS-232 port allow the BLU-50 to be integrated with other compatible devices.\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e","published_at":"2019-02-19T02:29:38-06:00","created_at":"2019-02-19T02:29:39-06:00","vendor":"BSS","type":"pro audio","tags":["pro-audio"],"price":142500,"price_min":142500,"price_max":142500,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367261548644,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BSSBLU50-M","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"BSS BLU-50 4x4 Signal Processor with BLU link","public_title":null,"options":["Default Title"],"price":142500,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/ojaxgc94ofyzmob6vdfq.jpg?v=1550564979"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/ojaxgc94ofyzmob6vdfq.jpg?v=1550564979","options":["Title"],"content":"\u003cb\u003eBSS BLU-50 4x4 Signal Processor with BLU link\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe BLU-50 is a half-rack width processor that offers a fixed configuration of four inputs and four outputs, configurable signal processing, logic processing and BLU link. The device can be powered with the included 12VDC power supply but can accept 12-48VDC via a terminal block connector. The BLU-50 can also be powered with PoE+ via the Ethernet port, allowing the device to be powered, configured, controlled and monitored using a single Cat 5e cable. \u003cbr\u003e\u003cbr\u003eThe analog inputs of the BLU-50 provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. \u003cbr\u003e\u003cbr\u003eThe BLU-50 features BLU link, a low latency, fault tolerant digital audio bus of 48 channels, which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber. \u003cbr\u003e\u003cbr\u003eThe BLU-50 is configured, controlled and monitored from HiQnet Audio Architect™ or HiQnet London Architect™ and is compatible with other members of the Soundweb London family. Its 48 channel BLU link bus represents channels 1-48 of the larger 256 channel BLU link bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices. Up to 60 BLU link compatible devices can share channels on a single bus. \u003cbr\u003e\u003cbr\u003eAs with other Soundweb London devices, 12 Control Inputs, six Logic Outputs and an RS-232 port allow the BLU-50 to be integrated with other compatible devices.\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843155595364,"title":"BSS BLU-806DA | Networked Signal Processor with Dante BLU Link Chassis","handle":"bssblu806mxv5","description":"\u003cb\u003eBSS BLU-806DA | Networked Signal Processor with Dante BLU Link Chassis\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Soundweb London BLU-806DA offers configurable I\/O, configurable signal processing, Dante \/ AES67 audio and a high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e\u003cbr\u003eThe BLU-806DA has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.\u003cbr\u003e\u003cbr\u003eThis processor features Dante \/ AES67 audio with primary and secondary ports for fault tolerance, with control through a separate Ethernet port.\u003cbr\u003e\u003cbr\u003eThe BLU-806DA also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003eFour Input \/ Output Card Slots\u003cbr\u003eConfigurable Inputs \/ Outputs\u003cbr\u003eAnalog Inputs (with Phantom Power per Channel)\u003cbr\u003eAnalog Outputs\u003cbr\u003eDigital Inputs (AES\/EBU and S\/PDIF)\u003cbr\u003eDigital Outputs (AES\/EBU and S\/PDIF)\u003cbr\u003eAEC Inputs (with Phantom Power per Channel)\u003cbr\u003eTelephone Hybrid Card\u003cbr\u003eConfigurable Signal Processing\u003cbr\u003eRich Palette of Processing and Logic Objects\u003cbr\u003eDante \/ AES67 Audio\u003cbr\u003e256 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003cbr\u003eClear Front Panel LED Indication\u003cbr\u003eInformative Front Panel Display\u003cbr\u003eBi-Directional Locate Functionality\u003cbr\u003e12 Control Inputs and 6 Logic Outputs for GPIO Integration\u003cbr\u003eSoundweb London Interface Kit for Third Party Control System Integration (Documentation)\u003cbr\u003eHiQnet Device\u003cbr\u003eConfiguration, Control and Monitoring from HiQnet London Architect\u003cbr\u003eAES67 Compatible\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e","published_at":"2019-02-19T02:29:34-06:00","created_at":"2019-02-19T02:29:35-06:00","vendor":"BSS","type":"pro audio","tags":["pro-audio"],"price":502300,"price_min":502300,"price_max":502300,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367256633444,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BSSBLU806MXV5","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"BSS BLU-806DA | Networked Signal Processor with Dante BLU Link Chassis","public_title":null,"options":["Default Title"],"price":502300,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/ozkfz93hyumjln2qsqje.jpg?v=1550564975"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/ozkfz93hyumjln2qsqje.jpg?v=1550564975","options":["Title"],"content":"\u003cb\u003eBSS BLU-806DA | Networked Signal Processor with Dante BLU Link Chassis\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Soundweb London BLU-806DA offers configurable I\/O, configurable signal processing, Dante \/ AES67 audio and a high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e\u003cbr\u003eThe BLU-806DA has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.\u003cbr\u003e\u003cbr\u003eThis processor features Dante \/ AES67 audio with primary and secondary ports for fault tolerance, with control through a separate Ethernet port.\u003cbr\u003e\u003cbr\u003eThe BLU-806DA also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003eFour Input \/ Output Card Slots\u003cbr\u003eConfigurable Inputs \/ Outputs\u003cbr\u003eAnalog Inputs (with Phantom Power per Channel)\u003cbr\u003eAnalog Outputs\u003cbr\u003eDigital Inputs (AES\/EBU and S\/PDIF)\u003cbr\u003eDigital Outputs (AES\/EBU and S\/PDIF)\u003cbr\u003eAEC Inputs (with Phantom Power per Channel)\u003cbr\u003eTelephone Hybrid Card\u003cbr\u003eConfigurable Signal Processing\u003cbr\u003eRich Palette of Processing and Logic Objects\u003cbr\u003eDante \/ AES67 Audio\u003cbr\u003e256 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003cbr\u003eClear Front Panel LED Indication\u003cbr\u003eInformative Front Panel Display\u003cbr\u003eBi-Directional Locate Functionality\u003cbr\u003e12 Control Inputs and 6 Logic Outputs for GPIO Integration\u003cbr\u003eSoundweb London Interface Kit for Third Party Control System Integration (Documentation)\u003cbr\u003eHiQnet Device\u003cbr\u003eConfiguration, Control and Monitoring from HiQnet London Architect\u003cbr\u003eAES67 Compatible\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843155497060,"title":"BSS BLU-BOB2 | Break Out Box Output Expander","handle":"bssblu-bob2-m","description":"\u003cb\u003eBSS BLU-BOB2 | Break Out Box Output Expander\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Soundweb London BLU-BOB2 or “break-out box” offers 8 channels of analog audio output expansion via the Soundweb London high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e\u003cbr\u003eThis expander features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. The BSS Audio MC-1 fiber optic media converter can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber.\u003cbr\u003e\u003cbr\u003eThe BLU-BOB2 output channels are easily configured by six DIP switches located on the rear of the device, which select consecutive channels in groups of eight. This simple configuration allows selection of any 8-channel range from the 256 channels available on the digital audio bus. Output channel assignments are configured by DIP switch selection only. The BLU-BOB2 is not configured by HiQnet™ London Architect.\u003cbr\u003e\u003cbr\u003eThe 8 analog line level outputs utilize the same terminal block connectors as the other members of the Soundweb London family.\u003cbr\u003e\u003cbr\u003eSignal present and power status are clearly displayed by front panel LED indicators.\u003cbr\u003e\u003cbr\u003eThe BLU-BOB2 break-out box output expanders are powered by a 12V DC adapter which is included with the devices.\u003cbr\u003e\u003cbr\u003eThe BLU-BOB2 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003cbr\u003e\u003cbr\u003eKEY FEATURES:\u003cbr\u003e8 Analog Audio Outputs\u003cbr\u003eStandard Terminal Block Connectors for Analog Audio Connections\u003cbr\u003eDIP Switches for Channel Range Selection\u003cbr\u003e256 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003cbr\u003eClear Front Panel LED Indication\u003cbr\u003e12VDC External Power included\u003cbr\u003eTerminal Block Connectors for Power Connection\u003cbr\u003e19” 1RU Chassis\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e\u003cbr\u003e","published_at":"2019-02-19T02:29:33-06:00","created_at":"2019-02-19T02:29:34-06:00","vendor":"BSS","type":"pro audio","tags":["pro-audio"],"price":86112,"price_min":86112,"price_max":86112,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367255945316,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BSSBLU-BOB2-M","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"BSS BLU-BOB2 | Break Out Box Output Expander","public_title":null,"options":["Default Title"],"price":86112,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/vhpkhe92oe25uuyl6udk.jpg?v=1550564974"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/vhpkhe92oe25uuyl6udk.jpg?v=1550564974","options":["Title"],"content":"\u003cb\u003eBSS BLU-BOB2 | Break Out Box Output Expander\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Soundweb London BLU-BOB2 or “break-out box” offers 8 channels of analog audio output expansion via the Soundweb London high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e\u003cbr\u003eThis expander features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. The BSS Audio MC-1 fiber optic media converter can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber.\u003cbr\u003e\u003cbr\u003eThe BLU-BOB2 output channels are easily configured by six DIP switches located on the rear of the device, which select consecutive channels in groups of eight. This simple configuration allows selection of any 8-channel range from the 256 channels available on the digital audio bus. Output channel assignments are configured by DIP switch selection only. The BLU-BOB2 is not configured by HiQnet™ London Architect.\u003cbr\u003e\u003cbr\u003eThe 8 analog line level outputs utilize the same terminal block connectors as the other members of the Soundweb London family.\u003cbr\u003e\u003cbr\u003eSignal present and power status are clearly displayed by front panel LED indicators.\u003cbr\u003e\u003cbr\u003eThe BLU-BOB2 break-out box output expanders are powered by a 12V DC adapter which is included with the devices.\u003cbr\u003e\u003cbr\u003eThe BLU-BOB2 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003cbr\u003e\u003cbr\u003eKEY FEATURES:\u003cbr\u003e8 Analog Audio Outputs\u003cbr\u003eStandard Terminal Block Connectors for Analog Audio Connections\u003cbr\u003eDIP Switches for Channel Range Selection\u003cbr\u003e256 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003cbr\u003eClear Front Panel LED Indication\u003cbr\u003e12VDC External Power included\u003cbr\u003eTerminal Block Connectors for Power Connection\u003cbr\u003e19” 1RU Chassis\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843155300452,"title":"BSS BLU-BOB1 | Break Out Box Output Expander","handle":"bssblu-bob1-m","description":"\u003cb\u003eBSS BLU-BOB1 | Break Out Box Output Expander\u003c\/b\u003e\u003cbr\u003eThe Soundweb London BLU-BOB1 or “break-out box” offers 8 channels of analog audio output expansion via the Soundweb London high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e\u003cbr\u003eThis expander features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. The BSS Audio MC-1 fiber optic media converter can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber.\u003cbr\u003e\u003cbr\u003eThe BLU-BOB1 output channels are easily configured by six DIP switches located on the rear of the device, which select consecutive channels in groups of eight. This simple configuration allows selection of any 8-channel range from the 256 channels available on the digital audio bus. Output channel assignments are configured by DIP switch selection only. The BLU-BOB1 is not configured by HiQnet™ London Architect.\u003cbr\u003e\u003cbr\u003eThe 8 analog line level outputs utilize the same terminal block connectors as the other members of the Soundweb London family.\u003cbr\u003e\u003cbr\u003eSignal present and power status are clearly displayed by front panel LED indicators.\u003cbr\u003e\u003cbr\u003eTwo chassis styles are available, the first (BLU-BOB1) is a half rack width, desk or wall mounted version and the second (BLU-BOB2) is a 19” single rack space version with mounting ears for equipment racks. Front panel indication and rear panel connections are identical on both versions.\u003cbr\u003e\u003cbr\u003eThe BLU-BOB1 break-out box output expanders are powered by a 12V DC adapter which is included with the devices.\u003cbr\u003e\u003cbr\u003eThe BLU-BOB1 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e8 Analog Audio Outputs\u003cbr\u003eStandard Terminal Block Connectors for Analog Audio Connections\u003cbr\u003eDIP Switches for Channel Range Selection\u003cbr\u003e256 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003cbr\u003eClear Front Panel LED Indication\u003cbr\u003e12VDC External Power included\u003cbr\u003eTerminal Block Connectors for Power Connection\u003cbr\u003eHalf Rack Width, Desk Mount or Wall Mount Chassis\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e","published_at":"2019-02-19T02:29:32-06:00","created_at":"2019-02-19T02:29:32-06:00","vendor":"BSS","type":"pro audio","tags":["pro-audio"],"price":78936,"price_min":78936,"price_max":78936,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367254339684,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BSSBLU-BOB1-M","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"BSS BLU-BOB1 | Break Out Box Output Expander","public_title":null,"options":["Default Title"],"price":78936,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/wfb7ruwf2bhocidjr7ry.jpg?v=1550564973"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/wfb7ruwf2bhocidjr7ry.jpg?v=1550564973","options":["Title"],"content":"\u003cb\u003eBSS BLU-BOB1 | Break Out Box Output Expander\u003c\/b\u003e\u003cbr\u003eThe Soundweb London BLU-BOB1 or “break-out box” offers 8 channels of analog audio output expansion via the Soundweb London high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e\u003cbr\u003eThis expander features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. The BSS Audio MC-1 fiber optic media converter can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber.\u003cbr\u003e\u003cbr\u003eThe BLU-BOB1 output channels are easily configured by six DIP switches located on the rear of the device, which select consecutive channels in groups of eight. This simple configuration allows selection of any 8-channel range from the 256 channels available on the digital audio bus. Output channel assignments are configured by DIP switch selection only. The BLU-BOB1 is not configured by HiQnet™ London Architect.\u003cbr\u003e\u003cbr\u003eThe 8 analog line level outputs utilize the same terminal block connectors as the other members of the Soundweb London family.\u003cbr\u003e\u003cbr\u003eSignal present and power status are clearly displayed by front panel LED indicators.\u003cbr\u003e\u003cbr\u003eTwo chassis styles are available, the first (BLU-BOB1) is a half rack width, desk or wall mounted version and the second (BLU-BOB2) is a 19” single rack space version with mounting ears for equipment racks. Front panel indication and rear panel connections are identical on both versions.\u003cbr\u003e\u003cbr\u003eThe BLU-BOB1 break-out box output expanders are powered by a 12V DC adapter which is included with the devices.\u003cbr\u003e\u003cbr\u003eThe BLU-BOB1 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e8 Analog Audio Outputs\u003cbr\u003eStandard Terminal Block Connectors for Analog Audio Connections\u003cbr\u003eDIP Switches for Channel Range Selection\u003cbr\u003e256 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003cbr\u003eClear Front Panel LED Indication\u003cbr\u003e12VDC External Power included\u003cbr\u003eTerminal Block Connectors for Power Connection\u003cbr\u003eHalf Rack Width, Desk Mount or Wall Mount Chassis\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e"}
$932.88
Quick View {"id":2843155136612,"title":"BSS BLU-BIB | Break In Box Input Expander","handle":"bssblu-bib-m","description":"\u003cb\u003eBSS BLU-BIB | Break In Box Input Expander\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Soundweb London BLU-BIB or “break-in box” offers 8 channels of analog audio input expansion via the Soundweb London high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e\u003cbr\u003eThis expander features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. The BSS Audio MC-1 fiber optic media converter can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber.\u003cbr\u003e\u003cbr\u003eThe BLU-BIB input channels are easily configured by six DIP switches located on the rear of the device, which select consecutive channels in groups of eight. This simple configuration allows assignment to any 8-channel range within the 256 channels available on the digital audio bus. Input channel assignments are configured by DIP switch selection only. The BLU-BIB is not configured by HiQnet™ London Architect. Each channel’s input gain and Phantom Power are adjusted using buttons on the front panel.\u003cbr\u003e\u003cbr\u003eThe 8 analog mic\/line level inputs utilize the same terminal block connectors as the other members of the Soundweb London family.\u003cbr\u003e\u003cbr\u003eSignal present, clip, and Phantom Power per channel are displayed by front panel LED indicators. The front panel also contains a power status and applied gain LED indicators.\u003cbr\u003e\u003cbr\u003eThe BLU-BIB operates in three different modes, which are entered and exited via the front panel controls. Edit Mode allows the user to adjust each channel’s input gain and Phantom Power. Normal Mode prevents the user from changing input gain or Phantom Power. Stealth Mode prevents the same changes from occurring, but without LED illumination (except power).\u003cbr\u003e\u003cbr\u003eThe chassis is a half rack wide and can be rack mounted using the BSS Audio 1U Rack-Mount Kit. It can also be under-table mounted or wall mounted using the included mounting brackets. The BLU-BIB break-in box input expander is powered by a 12V DC adapter which is included with the device.\u003cbr\u003e\u003cbr\u003eThe BLU-BIB and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e8 Analog Audio Inputs\u003cbr\u003eStandard Terminal Block Connectors for Analog Audio Connections\u003cbr\u003eDIP Switches for Channel Range Selection\u003cbr\u003eFront Panel Input Gain and Phantom Power Control\u003cbr\u003eFront Panel Lockout for Tamper-Free Operation\u003cbr\u003eFront Panel “Stealth” Mode for Inconspicuous Operation\u003cbr\u003e256 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003cbr\u003eClear Front Panel LED Indication\u003cbr\u003e12VDC External Power included\u003cbr\u003eTerminal Block Connectors for Power Connection\u003cbr\u003eHalf Rack Width, Desk Mount or Wall Mount Chassis (BLU-BOB1)\u003cbr\u003e1U Rack-Mount Kit available separately\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e","published_at":"2019-02-19T02:29:31-06:00","created_at":"2019-02-19T02:29:31-06:00","vendor":"BSS","type":"pro audio","tags":["pro-audio"],"price":93288,"price_min":93288,"price_max":93288,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367253651556,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BSSBLU-BIB-M","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BSS BLU-BIB | Break In Box Input Expander","public_title":null,"options":["Default Title"],"price":93288,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/xmvcft22dwt2ogw4rcsl.jpg?v=1550564972"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/xmvcft22dwt2ogw4rcsl.jpg?v=1550564972","options":["Title"],"content":"\u003cb\u003eBSS BLU-BIB | Break In Box Input Expander\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Soundweb London BLU-BIB or “break-in box” offers 8 channels of analog audio input expansion via the Soundweb London high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e\u003cbr\u003eThis expander features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. The BSS Audio MC-1 fiber optic media converter can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber.\u003cbr\u003e\u003cbr\u003eThe BLU-BIB input channels are easily configured by six DIP switches located on the rear of the device, which select consecutive channels in groups of eight. This simple configuration allows assignment to any 8-channel range within the 256 channels available on the digital audio bus. Input channel assignments are configured by DIP switch selection only. The BLU-BIB is not configured by HiQnet™ London Architect. Each channel’s input gain and Phantom Power are adjusted using buttons on the front panel.\u003cbr\u003e\u003cbr\u003eThe 8 analog mic\/line level inputs utilize the same terminal block connectors as the other members of the Soundweb London family.\u003cbr\u003e\u003cbr\u003eSignal present, clip, and Phantom Power per channel are displayed by front panel LED indicators. The front panel also contains a power status and applied gain LED indicators.\u003cbr\u003e\u003cbr\u003eThe BLU-BIB operates in three different modes, which are entered and exited via the front panel controls. Edit Mode allows the user to adjust each channel’s input gain and Phantom Power. Normal Mode prevents the user from changing input gain or Phantom Power. Stealth Mode prevents the same changes from occurring, but without LED illumination (except power).\u003cbr\u003e\u003cbr\u003eThe chassis is a half rack wide and can be rack mounted using the BSS Audio 1U Rack-Mount Kit. It can also be under-table mounted or wall mounted using the included mounting brackets. The BLU-BIB break-in box input expander is powered by a 12V DC adapter which is included with the device.\u003cbr\u003e\u003cbr\u003eThe BLU-BIB and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e8 Analog Audio Inputs\u003cbr\u003eStandard Terminal Block Connectors for Analog Audio Connections\u003cbr\u003eDIP Switches for Channel Range Selection\u003cbr\u003eFront Panel Input Gain and Phantom Power Control\u003cbr\u003eFront Panel Lockout for Tamper-Free Operation\u003cbr\u003eFront Panel “Stealth” Mode for Inconspicuous Operation\u003cbr\u003e256 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003cbr\u003eClear Front Panel LED Indication\u003cbr\u003e12VDC External Power included\u003cbr\u003eTerminal Block Connectors for Power Connection\u003cbr\u003eHalf Rack Width, Desk Mount or Wall Mount Chassis (BLU-BOB1)\u003cbr\u003e1U Rack-Mount Kit available separately\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843153891428,"title":"BSS BLU-GPX | Network Controlled General Purpose Input Output Expander","handle":"bssblugpxmx","description":"\u003cb\u003eBSS BLU-GPX | Network Controlled General Purpose Input Output Expander\u003c\/b\u003e\u003cbr\u003eThe Soundweb London BLU-GPX is a network-controlled GPIO expander which facilitates the cost-effective addition of Control Inputs, Logic Outputs, and Relays to systems requiring extra analog control\/interfacing capability. The BLU-GPX features the same rich palette of Logic Objects found in other Soundweb London devices, two PoE-enabled Ethernet ports for communications and primary power, a 12VDC power connector for secondary power, a RS-232 port for compatibility with serial devices, a bank of user-configurable front panel LEDs, a user-configurable front panel LCD, a user-configurable piezo buzzer for audible indication, and locate functionality.\u003cbr\u003e\u003cbr\u003eThe BLU-GPX has 36 Control Inputs. As with the Control Inputs found on other Soundweb London devices, these Control Inputs can be connected to contact closures for controlling binary parameters, resistor ladders for controlling multi-state parameters, or potentiometers for controlling continuous parameters.\u003cbr\u003e\u003cbr\u003eThe BLU-GPX has 23 Logic Outputs. As with the Logic Outputs found on other Soundweb London devices, these Logic Outputs can be connected directly to voltage-controlled electrical components such as LEDs and relays.\u003cbr\u003e\u003cbr\u003eThe BLU-GPX has 8 integrated Relay Outputs, each with Normally Open (NO) and Normally Closed (NC) terminals. The Relays will open or close in response to HiQnet parameters, and they can be connected directly to resistance-controlled electrical components\/circuits. These Relay Outputs reduce the need to source and deploy external relays.\u003cbr\u003e\u003cbr\u003eThe BLU-GPX has 47 Common (ground) connections. A multiplicity of Common connections results in simplified wiring to and from external equipment, reducing the need to span connections across terminal block connectors. Also provided are 12 Reference connections which facilitate 3-wire mode operation.\u003cbr\u003e\u003cbr\u003eThe BLU-GPX has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. The device is configured, controlled, monitored, and powered via either of the two PoE-enabled Ethernet ports. The device can also be controlled and monitored via the serial port. For power source backup, an additional 12VDC connector is provided. A front panel ‘Power Supply’ LED provides convenient indication of power supply status.\u003cbr\u003e\u003cbr\u003eOn the front panel of the BLU-GPX, there are 48 software-programmable LEDs. Each LED is a multi-color indicator capable of red, green, or yellow illumination. The front panel also contains a software-programmable, monochromatic LCD with 80x16 screen resolution for text-based visual indication of user-defined events.\u003cbr\u003e\u003cbr\u003eThe BLU-GPX has a software-programmable 4 kHz piezo buzzer for audible indication of user-defined events.\u003cbr\u003e\u003cbr\u003eA bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.\u003cbr\u003e\u003cbr\u003eThe BLU-GPX and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e36 Control Inputs (GPI)\u003cbr\u003e23 Logic Outputs (GPO)\u003cbr\u003e8 NC\/NO Relay Outputs\u003cbr\u003e47 Commons for Simple Wiring\u003cbr\u003e12 Reference Connections for 3-Wire Mode\u003cbr\u003e2-Wire or 3-Wire Mode Specifiable per Input Bank\u003cbr\u003e1 Opto-Isolator for Fault Monitoring\u003cbr\u003eRich Palette of Logic Objects\u003cbr\u003e2 PoE-Enabled Ethernet Ports for Configuration, Control, Monitoring, Primary Power, and Redundant Comms\u003cbr\u003e12VDC Secondary Power Connector for Power Source Backup\u003cbr\u003e48 User-Configurable LEDs (Front Panel)\u003cbr\u003eUser-Configurable LCD (Front Panel)\u003cbr\u003e4kHz Piezo Buzzer for Audible Indication\u003cbr\u003eBi-Directional Locate Functionality\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e","published_at":"2019-02-19T02:29:24-06:00","created_at":"2019-02-19T02:29:24-06:00","vendor":"BSS","type":"pro audio","tags":["pro-audio"],"price":199800,"price_min":199800,"price_max":199800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367246737508,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BSSBLUGPXMX","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"BSS BLU-GPX | Network Controlled General Purpose Input Output Expander","public_title":null,"options":["Default Title"],"price":199800,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/dekjwdszxd97903swsu0.jpg?v=1550564964"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/dekjwdszxd97903swsu0.jpg?v=1550564964","options":["Title"],"content":"\u003cb\u003eBSS BLU-GPX | Network Controlled General Purpose Input Output Expander\u003c\/b\u003e\u003cbr\u003eThe Soundweb London BLU-GPX is a network-controlled GPIO expander which facilitates the cost-effective addition of Control Inputs, Logic Outputs, and Relays to systems requiring extra analog control\/interfacing capability. The BLU-GPX features the same rich palette of Logic Objects found in other Soundweb London devices, two PoE-enabled Ethernet ports for communications and primary power, a 12VDC power connector for secondary power, a RS-232 port for compatibility with serial devices, a bank of user-configurable front panel LEDs, a user-configurable front panel LCD, a user-configurable piezo buzzer for audible indication, and locate functionality.\u003cbr\u003e\u003cbr\u003eThe BLU-GPX has 36 Control Inputs. As with the Control Inputs found on other Soundweb London devices, these Control Inputs can be connected to contact closures for controlling binary parameters, resistor ladders for controlling multi-state parameters, or potentiometers for controlling continuous parameters.\u003cbr\u003e\u003cbr\u003eThe BLU-GPX has 23 Logic Outputs. As with the Logic Outputs found on other Soundweb London devices, these Logic Outputs can be connected directly to voltage-controlled electrical components such as LEDs and relays.\u003cbr\u003e\u003cbr\u003eThe BLU-GPX has 8 integrated Relay Outputs, each with Normally Open (NO) and Normally Closed (NC) terminals. The Relays will open or close in response to HiQnet parameters, and they can be connected directly to resistance-controlled electrical components\/circuits. These Relay Outputs reduce the need to source and deploy external relays.\u003cbr\u003e\u003cbr\u003eThe BLU-GPX has 47 Common (ground) connections. A multiplicity of Common connections results in simplified wiring to and from external equipment, reducing the need to span connections across terminal block connectors. Also provided are 12 Reference connections which facilitate 3-wire mode operation.\u003cbr\u003e\u003cbr\u003eThe BLU-GPX has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. The device is configured, controlled, monitored, and powered via either of the two PoE-enabled Ethernet ports. The device can also be controlled and monitored via the serial port. For power source backup, an additional 12VDC connector is provided. A front panel ‘Power Supply’ LED provides convenient indication of power supply status.\u003cbr\u003e\u003cbr\u003eOn the front panel of the BLU-GPX, there are 48 software-programmable LEDs. Each LED is a multi-color indicator capable of red, green, or yellow illumination. The front panel also contains a software-programmable, monochromatic LCD with 80x16 screen resolution for text-based visual indication of user-defined events.\u003cbr\u003e\u003cbr\u003eThe BLU-GPX has a software-programmable 4 kHz piezo buzzer for audible indication of user-defined events.\u003cbr\u003e\u003cbr\u003eA bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.\u003cbr\u003e\u003cbr\u003eThe BLU-GPX and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e36 Control Inputs (GPI)\u003cbr\u003e23 Logic Outputs (GPO)\u003cbr\u003e8 NC\/NO Relay Outputs\u003cbr\u003e47 Commons for Simple Wiring\u003cbr\u003e12 Reference Connections for 3-Wire Mode\u003cbr\u003e2-Wire or 3-Wire Mode Specifiable per Input Bank\u003cbr\u003e1 Opto-Isolator for Fault Monitoring\u003cbr\u003eRich Palette of Logic Objects\u003cbr\u003e2 PoE-Enabled Ethernet Ports for Configuration, Control, Monitoring, Primary Power, and Redundant Comms\u003cbr\u003e12VDC Secondary Power Connector for Power Source Backup\u003cbr\u003e48 User-Configurable LEDs (Front Panel)\u003cbr\u003eUser-Configurable LCD (Front Panel)\u003cbr\u003e4kHz Piezo Buzzer for Audible Indication\u003cbr\u003eBi-Directional Locate Functionality\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e- Usually ships within 48 hours\u003cbr\u003e- Ships directly from the manufacturer\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843152580708,"title":"Alto TS212 TRUESONIC 1100W 12\" 2-Way Powered Loudspeaker (White)","handle":"ts212whitexus","description":"\u003cb\u003e\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eAlto TS212 TRUESONIC 1100W 12\" 2-Way Powered Loudspeaker (White)\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e550W continuous, 1100W peak Class D power\u003c\/li\u003e\n\u003cli\u003e12-inch (304.8 mm) LF driver, 2.5-inch (63.5mm) high-temperature voice coil\u003c\/li\u003e\n\u003cli\u003e1-inch (25.4 mm) neodymium HF driver with precision waveguide\u003c\/li\u003e\n\u003cli\u003eBi-amplified design with precision active crossover and EQ\u003c\/li\u003e\n\u003cli\u003eIntegrated 2-channel mixer with dual XLR 1\/4-inch combo mic\/line inputs and independent level controls\u003c\/li\u003e\n\u003cli\u003eCustom engineered high-efficiency class D amplifiers with passive cooling design – No fan means the speaker runs cleaner, quieter and has greater long-term reliability\u003c\/li\u003e\n\u003cli\u003eXLR Link output\u003c\/li\u003e\n\u003cli\u003eGround-Lift switch\u003c\/li\u003e\n\u003cli\u003eContour switch for increased EQ control\u003c\/li\u003e\n\u003cli\u003eElectronic clip, thermal and transducer overdrive protection\u003c\/li\u003e\n\u003cli\u003eCompact, lightweight, trapezoidal cabinet design for easy transport and installation\u003c\/li\u003e\n\u003cli\u003eAngled rear panel for wedge monitor applications\u003c\/li\u003e\n\u003cli\u003eStand and pole-mountable with integral M10 suspension points\u003c\/li\u003e\n\u003cli\u003eDesigned and tuned in the USA\u003c\/li\u003e\n\u003c\/ul\u003e \u003cspan\u003eTECH\u003c\/span\u003e INFORMATION \u003cul\u003e\n\u003cli\u003eOutput Power: 1100 W peak (700 LF + 400 HF) 550 W continuous RMS (350 LF + 200 HF)\u003c\/li\u003e\n\u003cli\u003eLow Frequency: 12-inch (305 mm) woofer, 2-inch (51 mm) voice coil\u003c\/li\u003e\n\u003cli\u003eHigh Frequency: 1-inch (25 mm) neodymium driver with precision waveguide\u003c\/li\u003e\n\u003cli\u003eCrossover: 2 kHz\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: 127 dB peak, 124 dB continuous (dB-SPL @ 1 m)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 53 Hz – 20 kHz (+\/- 3 dB)\u003c\/li\u003e\n\u003cli\u003eFrequency Range: 46 Hz – 22 kHz (-10 dB)\u003c\/li\u003e\n\u003cli\u003eCoverage: 90° H x 60° V nominal\u003c\/li\u003e\n\u003cli\u003eConnectors: (2) XLR + ¼-inch combo jack mic\/line inputs (1) XLR Mix Output\u003c\/li\u003e\n\u003cli\u003eCabinet: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille\u003c\/li\u003e\n\u003cli\u003eControls: Volume, power on\/off with LED, clip limiter with LED, ground lift\u003c\/li\u003e\n\u003cli\u003eProtection: Electronic clip, thermal and transducer overdrive protection\u003c\/li\u003e\n\u003cli\u003ePower: AC Input: 100–120\/220–240 V, 50\/60 HzFuse: 100-120 V T6.3AL AC250V \/ 220-240 V T3.15AL AC250V\u003c\/li\u003e\n\u003cli\u003eDimensions (WxDxH): 14.04\" x 13.80\" x 23.28\" \/ 357 x 351 x 591 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 28.4 lbs.12.86 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e","published_at":"2019-02-19T02:29:13-06:00","created_at":"2019-02-19T02:29:14-06:00","vendor":"Alto","type":"pro audio","tags":["pro-audio"],"price":34900,"price_min":34900,"price_max":34900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367238152292,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TS212WHITEXUS","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Alto TS212 TRUESONIC 1100W 12\" 2-Way Powered Loudspeaker (White)","public_title":null,"options":["Default Title"],"price":34900,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"8.16E+11"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/b02dbxtye5w4tplgj0hy.jpg?v=1550564954"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/b02dbxtye5w4tplgj0hy.jpg?v=1550564954","options":["Title"],"content":"\u003cb\u003e\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eAlto TS212 TRUESONIC 1100W 12\" 2-Way Powered Loudspeaker (White)\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e550W continuous, 1100W peak Class D power\u003c\/li\u003e\n\u003cli\u003e12-inch (304.8 mm) LF driver, 2.5-inch (63.5mm) high-temperature voice coil\u003c\/li\u003e\n\u003cli\u003e1-inch (25.4 mm) neodymium HF driver with precision waveguide\u003c\/li\u003e\n\u003cli\u003eBi-amplified design with precision active crossover and EQ\u003c\/li\u003e\n\u003cli\u003eIntegrated 2-channel mixer with dual XLR 1\/4-inch combo mic\/line inputs and independent level controls\u003c\/li\u003e\n\u003cli\u003eCustom engineered high-efficiency class D amplifiers with passive cooling design – No fan means the speaker runs cleaner, quieter and has greater long-term reliability\u003c\/li\u003e\n\u003cli\u003eXLR Link output\u003c\/li\u003e\n\u003cli\u003eGround-Lift switch\u003c\/li\u003e\n\u003cli\u003eContour switch for increased EQ control\u003c\/li\u003e\n\u003cli\u003eElectronic clip, thermal and transducer overdrive protection\u003c\/li\u003e\n\u003cli\u003eCompact, lightweight, trapezoidal cabinet design for easy transport and installation\u003c\/li\u003e\n\u003cli\u003eAngled rear panel for wedge monitor applications\u003c\/li\u003e\n\u003cli\u003eStand and pole-mountable with integral M10 suspension points\u003c\/li\u003e\n\u003cli\u003eDesigned and tuned in the USA\u003c\/li\u003e\n\u003c\/ul\u003e \u003cspan\u003eTECH\u003c\/span\u003e INFORMATION \u003cul\u003e\n\u003cli\u003eOutput Power: 1100 W peak (700 LF + 400 HF) 550 W continuous RMS (350 LF + 200 HF)\u003c\/li\u003e\n\u003cli\u003eLow Frequency: 12-inch (305 mm) woofer, 2-inch (51 mm) voice coil\u003c\/li\u003e\n\u003cli\u003eHigh Frequency: 1-inch (25 mm) neodymium driver with precision waveguide\u003c\/li\u003e\n\u003cli\u003eCrossover: 2 kHz\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: 127 dB peak, 124 dB continuous (dB-SPL @ 1 m)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 53 Hz – 20 kHz (+\/- 3 dB)\u003c\/li\u003e\n\u003cli\u003eFrequency Range: 46 Hz – 22 kHz (-10 dB)\u003c\/li\u003e\n\u003cli\u003eCoverage: 90° H x 60° V nominal\u003c\/li\u003e\n\u003cli\u003eConnectors: (2) XLR + ¼-inch combo jack mic\/line inputs (1) XLR Mix Output\u003c\/li\u003e\n\u003cli\u003eCabinet: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille\u003c\/li\u003e\n\u003cli\u003eControls: Volume, power on\/off with LED, clip limiter with LED, ground lift\u003c\/li\u003e\n\u003cli\u003eProtection: Electronic clip, thermal and transducer overdrive protection\u003c\/li\u003e\n\u003cli\u003ePower: AC Input: 100–120\/220–240 V, 50\/60 HzFuse: 100-120 V T6.3AL AC250V \/ 220-240 V T3.15AL AC250V\u003c\/li\u003e\n\u003cli\u003eDimensions (WxDxH): 14.04\" x 13.80\" x 23.28\" \/ 357 x 351 x 591 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 28.4 lbs.12.86 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843152515172,"title":"Alesis PA System in a Box | 280-Watt (80 Watts Continuous) 4-Channel PA System","handle":"pasysteminaboxxus","description":"\u003cb\u003e\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003e\u003cb\u003eAlesis PA System in a Box | 280-Watt (80 Watts Continuous) 4-Channel PA System\u003c\/b\u003e\u003cbr\u003eThe Alesis PA System in a Box includes a 4-channel powered mixer with a powerful 280-watt (peak power) amplifier, two 10-inch 2-way, high-output passive speakers and two 20-foot speaker cables--- everything you need for great sound reinforcement, all in one box. It’s perfect for anyone who needs an affordable but complete mobile PA system for a small venue, rehearsal space, presentation, ceremony, house of worship or sporting event.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINCLUDES PA80 POWERED MIXER\u003c\/b\u003e\u003cbr\u003eThe included PA80 4-channel powered mixer features a balanced microphone XLR input, an unbalanced ¼” line input, 2-band EQ, and a FX level control on each of the 4 channels. There is also a 3-band master EQ, as well as a master level, time, and a repeat control for the built-in digital delay effect. The powered mixer has 280 dynamic watts of power on hand (80 watts continuous), and provides the system’s speakers with abundant power for exciting room-filling sound. There is also an RCA input for playing back songs from your mobile device, as well as an RCA output for connecting to a portable recorder. If you need additional inputs, there’s an additional ¼” line input and ¼” line output for connecting other external devices.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eONBOARD USB\/SD MP3 PLAYER\u003c\/b\u003e\u003cbr\u003eThe PA80 Powered mixer also features USB and SC Card inputs for playing MP3s--- perfect for intermission music at an event or for learning music from a recording as a group. The onboard controls can be used to play, stop, or change tracks, as well as change the EQ of the MP3 audio to cater to pop, rock, jazz or classical.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONTENTS\u003c\/b\u003e\u003cbr\u003ePA80 Powered Mixer\u003cbr\u003e(2) 10” 2-way Passive Speakers\u003cbr\u003e(2) Speaker Cables\u003cbr\u003eUser Guide\u003cbr\u003eSafety \u0026amp; Warranty Manual\u003cbr\u003e","published_at":"2019-02-19T02:29:12-06:00","created_at":"2019-02-19T02:29:13-06:00","vendor":"Alesis","type":"pro audio","tags":["pro-audio"],"price":24900,"price_min":24900,"price_max":24900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367236317284,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PASYSTEMINABOXXUS","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Alesis PA System in a Box | 280-Watt (80 Watts Continuous) 4-Channel PA System","public_title":null,"options":["Default Title"],"price":24900,"weight":24970,"compare_at_price":null,"inventory_management":"shopify","barcode":"6.94E+11"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/l4yg84z2hbb9e4yuejyw.jpg?v=1550564953"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/l4yg84z2hbb9e4yuejyw.jpg?v=1550564953","options":["Title"],"content":"\u003cb\u003e\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003e\u003cb\u003eAlesis PA System in a Box | 280-Watt (80 Watts Continuous) 4-Channel PA System\u003c\/b\u003e\u003cbr\u003eThe Alesis PA System in a Box includes a 4-channel powered mixer with a powerful 280-watt (peak power) amplifier, two 10-inch 2-way, high-output passive speakers and two 20-foot speaker cables--- everything you need for great sound reinforcement, all in one box. It’s perfect for anyone who needs an affordable but complete mobile PA system for a small venue, rehearsal space, presentation, ceremony, house of worship or sporting event.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINCLUDES PA80 POWERED MIXER\u003c\/b\u003e\u003cbr\u003eThe included PA80 4-channel powered mixer features a balanced microphone XLR input, an unbalanced ¼” line input, 2-band EQ, and a FX level control on each of the 4 channels. There is also a 3-band master EQ, as well as a master level, time, and a repeat control for the built-in digital delay effect. The powered mixer has 280 dynamic watts of power on hand (80 watts continuous), and provides the system’s speakers with abundant power for exciting room-filling sound. There is also an RCA input for playing back songs from your mobile device, as well as an RCA output for connecting to a portable recorder. If you need additional inputs, there’s an additional ¼” line input and ¼” line output for connecting other external devices.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eONBOARD USB\/SD MP3 PLAYER\u003c\/b\u003e\u003cbr\u003eThe PA80 Powered mixer also features USB and SC Card inputs for playing MP3s--- perfect for intermission music at an event or for learning music from a recording as a group. The onboard controls can be used to play, stop, or change tracks, as well as change the EQ of the MP3 audio to cater to pop, rock, jazz or classical.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONTENTS\u003c\/b\u003e\u003cbr\u003ePA80 Powered Mixer\u003cbr\u003e(2) 10” 2-way Passive Speakers\u003cbr\u003e(2) Speaker Cables\u003cbr\u003eUser Guide\u003cbr\u003eSafety \u0026amp; Warranty Manual\u003cbr\u003e"}
$199.00
Quick View {"id":2843152253028,"title":"Alesis Transactive Wireless 2 Portable Rechargeable Bluetooth Speaker w\/ Lights","handle":"tawireless2xus","description":"\u003cb\u003e\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAlesis Transactive Wireless 2 Portable Rechargeable Bluetooth Speaker w\/ Lights\u003c\/b\u003e\u003cbr\u003eThe Alesis TransActive Wireless 2 is a complete, active PA system with built-in lights designed for on-the-go use. Pull up the telescoping handle, tilt it back onto the recessed wheels, and take your TransActive Wireless 2 with you wherever you go. Once you’re there, simple single-button pairing allows you to instantly stream audio from any Bluetooth-enabled device. You can also activate an exciting full-color light show that reacts to your music—no programming required! TransActive Wireless 2 is the ultimate mobile PA. It’s perfect for outdoor parties, live gigs, business meetings, sporting events and tailgate parties.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003ePortable, powered PA speaker with integrated RGB LED lightning\u003cbr\u003eSpeaker projects clear, undistorted sound more than 150 feet (45m)\u003cbr\u003eStream audio wirelessly from any Bluetooth-enabled device\u003cbr\u003eWorks with iPad, iPhone, iPod touch, Android devices, Mac, PC, and more\u003cbr\u003eBuilt-in light show reacts to your audio—no programming required\u003cbr\u003eBuilt-in rechargeable battery delivers up to 50 hours of cordless power\u003cbr\u003eUSB charging port for your phone, tablet or other device\u003cbr\u003eIncludes high-quality microphone with on\/off switch\u003cbr\u003ePerfect for indoor or outdoor use\u003cbr\u003eRugged design withstands heavy use\u003cbr\u003eRecessed wheels and telescoping handle for easy transport\u003cbr\u003eStandard 1-3\/8” (35mm) socket enables convenient mounting on speaker stand\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONTENTS:\u003c\/b\u003e\u003cbr\u003eTransActive Wireless 2\u003cbr\u003eMicrophone\u003cbr\u003ePower Cable\u003cbr\u003eUser Guide\u003cbr\u003eSafety \u0026amp; Warranty Guide\u003cbr\u003e","published_at":"2019-02-19T02:29:10-06:00","created_at":"2019-02-19T02:29:11-06:00","vendor":"Alesis","type":"pro audio","tags":["pro-audio"],"price":19900,"price_min":19900,"price_max":19900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367234908260,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TAWIRELESS2XUS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alesis Transactive Wireless 2 Portable Rechargeable Bluetooth Speaker w\/ Lights","public_title":null,"options":["Default Title"],"price":19900,"weight":15889,"compare_at_price":null,"inventory_management":"shopify","barcode":"6.94E+11"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/o9kqzzf50ejicvcvekde.png?v=1550564951"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/o9kqzzf50ejicvcvekde.png?v=1550564951","options":["Title"],"content":"\u003cb\u003e\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAlesis Transactive Wireless 2 Portable Rechargeable Bluetooth Speaker w\/ Lights\u003c\/b\u003e\u003cbr\u003eThe Alesis TransActive Wireless 2 is a complete, active PA system with built-in lights designed for on-the-go use. Pull up the telescoping handle, tilt it back onto the recessed wheels, and take your TransActive Wireless 2 with you wherever you go. Once you’re there, simple single-button pairing allows you to instantly stream audio from any Bluetooth-enabled device. You can also activate an exciting full-color light show that reacts to your music—no programming required! TransActive Wireless 2 is the ultimate mobile PA. It’s perfect for outdoor parties, live gigs, business meetings, sporting events and tailgate parties.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003cbr\u003ePortable, powered PA speaker with integrated RGB LED lightning\u003cbr\u003eSpeaker projects clear, undistorted sound more than 150 feet (45m)\u003cbr\u003eStream audio wirelessly from any Bluetooth-enabled device\u003cbr\u003eWorks with iPad, iPhone, iPod touch, Android devices, Mac, PC, and more\u003cbr\u003eBuilt-in light show reacts to your audio—no programming required\u003cbr\u003eBuilt-in rechargeable battery delivers up to 50 hours of cordless power\u003cbr\u003eUSB charging port for your phone, tablet or other device\u003cbr\u003eIncludes high-quality microphone with on\/off switch\u003cbr\u003ePerfect for indoor or outdoor use\u003cbr\u003eRugged design withstands heavy use\u003cbr\u003eRecessed wheels and telescoping handle for easy transport\u003cbr\u003eStandard 1-3\/8” (35mm) socket enables convenient mounting on speaker stand\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONTENTS:\u003c\/b\u003e\u003cbr\u003eTransActive Wireless 2\u003cbr\u003eMicrophone\u003cbr\u003ePower Cable\u003cbr\u003eUser Guide\u003cbr\u003eSafety \u0026amp; Warranty Guide\u003cbr\u003e"}
$1,472.00
Quick View {"id":2843151958116,"title":"Soundcraft LX7ii 24Ch | 24 Channel Recording Mixer","handle":"rw5675","description":"\u003cb\u003eSoundcraft LX7ii 24Ch | 24 Channel Recording Mixer\u003c\/b\u003e\u003cbr\u003eThe Soundcraft LX7 II series of professional analog consoles improves upon an impressive feature set, suited to meet the demands of professional recording and live sound engineers. The LX7 II series is available in 16, 24 and 32 input configurations. Every input features balanced 1\/4\" phone line level inputs, direct outputs are featured on the first 16 channels for recording and monitoring applications.\u003cbr\u003e\u003cbr\u003eHigh quality redesigned microphone preamps are located on every input channel, as well as 1\/4\" TRS phone inserts for routing signal to external processors. All LX7 II configurations feature 4 sub group outputs that can be used for routing signal to monitors, recorders etc. 6 Aux sends are featured and provide routing to external effects and signal processors. The LX7 II series features the routing and functionality that will prove suitable for crucial recording and live sound reinforcement.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e24 Input Configuration - The LX7 II console is available in three different channel configurations. This model features 24 input channels with 4 sub group outputs.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 Sub Group Outputs - 4 sub group outputs are featured and allow audio signals to be routed to multi track recorders and monitors.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInserts - Inserts are featured on all input channels and group outputs. Inserts allow routing to and from external signal processors.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnhanced Mic Preamplifiers - Every input features a Graham Blyth designed microphone preamplifier that delivers exceptional headroom, smooth detail and very low noise floor.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2019-02-19T02:29:07-06:00","created_at":"2019-02-19T02:29:08-06:00","vendor":"Soundcraft","type":"pro audio","tags":["pro-audio"],"price":147200,"price_min":147200,"price_max":147200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367230877796,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RW5675","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Soundcraft LX7ii 24Ch | 24 Channel Recording Mixer","public_title":null,"options":["Default Title"],"price":147200,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"6.89E+11"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/upuokmlatt7xhzocspct.jpg?v=1550564950"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/upuokmlatt7xhzocspct.jpg?v=1550564950","options":["Title"],"content":"\u003cb\u003eSoundcraft LX7ii 24Ch | 24 Channel Recording Mixer\u003c\/b\u003e\u003cbr\u003eThe Soundcraft LX7 II series of professional analog consoles improves upon an impressive feature set, suited to meet the demands of professional recording and live sound engineers. The LX7 II series is available in 16, 24 and 32 input configurations. Every input features balanced 1\/4\" phone line level inputs, direct outputs are featured on the first 16 channels for recording and monitoring applications.\u003cbr\u003e\u003cbr\u003eHigh quality redesigned microphone preamps are located on every input channel, as well as 1\/4\" TRS phone inserts for routing signal to external processors. All LX7 II configurations feature 4 sub group outputs that can be used for routing signal to monitors, recorders etc. 6 Aux sends are featured and provide routing to external effects and signal processors. The LX7 II series features the routing and functionality that will prove suitable for crucial recording and live sound reinforcement.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e24 Input Configuration - The LX7 II console is available in three different channel configurations. This model features 24 input channels with 4 sub group outputs.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 Sub Group Outputs - 4 sub group outputs are featured and allow audio signals to be routed to multi track recorders and monitors.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInserts - Inserts are featured on all input channels and group outputs. Inserts allow routing to and from external signal processors.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnhanced Mic Preamplifiers - Every input features a Graham Blyth designed microphone preamplifier that delivers exceptional headroom, smooth detail and very low noise floor.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e"}
SPECIAL ORDER
Quick View {"id":2843151827044,"title":"Soundcraft GB8 24Ch | 24 Mono, 4 Stereo Live Sound\/Recording Console, Dual Mode Topology","handle":"rw5695sm","description":"\u003cb\u003eSoundcraft GB8 24Ch | 24 Mono, 4 Stereo Live Sound\/Recording Console, Dual Mode Topology\u003c\/b\u003e\u003cbr\u003eThe Soundcraft GB8 live console series is designed to deliver the audio fidelity and mixing capabilities necessary in front-of-house (FOH) or monitor mixing applications in large or small venues. The GB8 is available in 16, 24, 32, 40 and 48 channel frames to suite specific needs in live sound mixing.\u003cbr\u003e\u003cbr\u003eThis model is configured with 24 input channels. 24 inputs feature microphone and line level connections, an additional 4 stereo inputs are provided as well. The stereo inputs (ST1 - ST4) provide L\/R stereo line level inputs and 3-pin XLR microphone inputs for stereo microphone placement when capturing vocals, instruments, ambiance, etc. The console features 8 group outputs enabling routing to monitors, external recorders, etc. The GB8 series implements Soundcraft's GB30 microphone preamp and EQ, delivering the sonic quality expected of more costly consoles.\u003cbr\u003e\u003cbr\u003eAdditional features include Soundcraft's famed matrix mixer for added routing flexibility and an integrated meter bridge, enabling accurate metering.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- 24 Mono, 4 Stereo Input Channels - The GB8 series is available in a variety of frame configurations. This model features 24 mono and 4 stereo inputs\u003cbr\u003e- 8 Subgroup Outputs - The GB8 series feature 8 group outputs for routing to external recorders, monitors, etc.\u003cbr\u003e- Matrix Mixer - The matrix output mixer provides added routing flexibility.\u003cbr\u003e- 8 Auxiliary Sends - 8 auxiliary sends provide plenty of routing to external effects, monitors, etc.\u003cbr\u003e- Direct Outputs - All mono inputs provide direct outputs for direct routing to recorders, mixers, etc.\u003cbr\u003e- GB30 Microphone Preamplifiers - Soundcraft's GB30 microphone preamplifier's provide an ultra low-noise floor while maintaining high output gain.\u003cbr\u003e- Integrated Meterbridge - The GB8 series features an integrated LED and VU meter bridge for accurate metering of input and output level.\u003cbr\u003e","published_at":"2019-02-19T02:29:06-06:00","created_at":"2019-02-19T02:29:07-06:00","vendor":"Soundcraft","type":"pro audio","tags":["pro-audio"],"price":337300,"price_min":337300,"price_max":337300,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367227371620,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RW5695SM","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Soundcraft GB8 24Ch | 24 Mono, 4 Stereo Live Sound\/Recording Console, Dual Mode Topology","public_title":null,"options":["Default Title"],"price":337300,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"6.89E+11"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/in05jcg81e2omkleuizc.jpg?v=1550564947"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/in05jcg81e2omkleuizc.jpg?v=1550564947","options":["Title"],"content":"\u003cb\u003eSoundcraft GB8 24Ch | 24 Mono, 4 Stereo Live Sound\/Recording Console, Dual Mode Topology\u003c\/b\u003e\u003cbr\u003eThe Soundcraft GB8 live console series is designed to deliver the audio fidelity and mixing capabilities necessary in front-of-house (FOH) or monitor mixing applications in large or small venues. The GB8 is available in 16, 24, 32, 40 and 48 channel frames to suite specific needs in live sound mixing.\u003cbr\u003e\u003cbr\u003eThis model is configured with 24 input channels. 24 inputs feature microphone and line level connections, an additional 4 stereo inputs are provided as well. The stereo inputs (ST1 - ST4) provide L\/R stereo line level inputs and 3-pin XLR microphone inputs for stereo microphone placement when capturing vocals, instruments, ambiance, etc. The console features 8 group outputs enabling routing to monitors, external recorders, etc. The GB8 series implements Soundcraft's GB30 microphone preamp and EQ, delivering the sonic quality expected of more costly consoles.\u003cbr\u003e\u003cbr\u003eAdditional features include Soundcraft's famed matrix mixer for added routing flexibility and an integrated meter bridge, enabling accurate metering.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- 24 Mono, 4 Stereo Input Channels - The GB8 series is available in a variety of frame configurations. This model features 24 mono and 4 stereo inputs\u003cbr\u003e- 8 Subgroup Outputs - The GB8 series feature 8 group outputs for routing to external recorders, monitors, etc.\u003cbr\u003e- Matrix Mixer - The matrix output mixer provides added routing flexibility.\u003cbr\u003e- 8 Auxiliary Sends - 8 auxiliary sends provide plenty of routing to external effects, monitors, etc.\u003cbr\u003e- Direct Outputs - All mono inputs provide direct outputs for direct routing to recorders, mixers, etc.\u003cbr\u003e- GB30 Microphone Preamplifiers - Soundcraft's GB30 microphone preamplifier's provide an ultra low-noise floor while maintaining high output gain.\u003cbr\u003e- Integrated Meterbridge - The GB8 series features an integrated LED and VU meter bridge for accurate metering of input and output level.\u003cbr\u003e"}
SPECIAL ORDER
Quick View {"id":2843151728740,"title":"Soundcraft GB8 40Ch | 40 Mono, 4 Stereo Live Sound\/Recording Console, Dual Mode Topology","handle":"rw5697sm","description":"\u003cb\u003eSoundcraft GB8 40Ch | 40 Mono, 4 Stereo Live Sound\/Recording Console, Dual Mode Topology\u003c\/b\u003e\u003cbr\u003eThe Soundcraft GB8 live console series is designed to deliver the audio fidelity and mixing capabilities necessary in front-of-house (FOH) or monitor mixing applications in large or small venues. The GB8 is available in 16, 24, 32, 40 and 48 channel frames to suite specific needs in live sound mixing.\u003cbr\u003e\u003cbr\u003eThis model is configured with 40 input channels. 40 inputs feature microphone and line level connections, an additional 4 stereo inputs are provided as well. The stereo inputs (ST1 - ST4) provide L\/R stereo line level inputs and 3-pin XLR microphone inputs for stereo microphone placement when capturing vocals, instruments, ambiance, etc. The console features 8 group outputs enabling routing to monitors, external recorders, etc. The GB8 series implements Soundcraft's GB30 microphone preamp and EQ, delivering the sonic quality expected of more costly consoles.\u003cbr\u003e\u003cbr\u003eAdditional features include Soundcraft's famed matrix mixer for added routing flexibility and an integrated meter bridge, enabling accurate metering.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- 40 Mono, 4 Stereo Input Channels - The GB8 series is available in a variety of frame configurations. This model features 40 mono and 4 stereo inputs\u003cbr\u003e- 8 Subgroup Outputs - The GB8 series feature 8 group outputs for routing to external recorders, monitors, etc.\u003cbr\u003e- Matrix Mixer - The matrix output mixer provides added routing flexibility.\u003cbr\u003e- 8 Auxiliary Sends - 8 auxiliary sends provide plenty of routing to external effects, monitors, etc.\u003cbr\u003e- Direct Outputs - All mono inputs provide direct outputs for direct routing to recorders, mixers, etc.\u003cbr\u003e- GB30 Microphone Preamplifiers - Soundcraft's GB30 microphone preamplifier's provide an ultra low-noise floor while maintaining high output gain.\u003cbr\u003e- Integrated Meterbridge - The GB8 series features an integrated LED and VU meter bridge for accurate metering of input and output level.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2019-02-19T02:29:05-06:00","created_at":"2019-02-19T02:29:05-06:00","vendor":"Soundcraft","type":"pro audio","tags":["pro-audio"],"price":474400,"price_min":474400,"price_max":474400,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24367226945636,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RW5697SM","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Soundcraft GB8 40Ch | 40 Mono, 4 Stereo Live Sound\/Recording Console, Dual Mode Topology","public_title":null,"options":["Default Title"],"price":474400,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"6.89E+11"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/ibtzplgubyhbhukzqohw.jpg?v=1550564946"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/0728\/7396\/products\/ibtzplgubyhbhukzqohw.jpg?v=1550564946","options":["Title"],"content":"\u003cb\u003eSoundcraft GB8 40Ch | 40 Mono, 4 Stereo Live Sound\/Recording Console, Dual Mode Topology\u003c\/b\u003e\u003cbr\u003eThe Soundcraft GB8 live console series is designed to deliver the audio fidelity and mixing capabilities necessary in front-of-house (FOH) or monitor mixing applications in large or small venues. The GB8 is available in 16, 24, 32, 40 and 48 channel frames to suite specific needs in live sound mixing.\u003cbr\u003e\u003cbr\u003eThis model is configured with 40 input channels. 40 inputs feature microphone and line level connections, an additional 4 stereo inputs are provided as well. The stereo inputs (ST1 - ST4) provide L\/R stereo line level inputs and 3-pin XLR microphone inputs for stereo microphone placement when capturing vocals, instruments, ambiance, etc. The console features 8 group outputs enabling routing to monitors, external recorders, etc. The GB8 series implements Soundcraft's GB30 microphone preamp and EQ, delivering the sonic quality expected of more costly consoles.\u003cbr\u003e\u003cbr\u003eAdditional features include Soundcraft's famed matrix mixer for added routing flexibility and an integrated meter bridge, enabling accurate metering.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- 40 Mono, 4 Stereo Input Channels - The GB8 series is available in a variety of frame configurations. This model features 40 mono and 4 stereo inputs\u003cbr\u003e- 8 Subgroup Outputs - The GB8 series feature 8 group outputs for routing to external recorders, monitors, etc.\u003cbr\u003e- Matrix Mixer - The matrix output mixer provides added routing flexibility.\u003cbr\u003e- 8 Auxiliary Sends - 8 auxiliary sends provide plenty of routing to external effects, monitors, etc.\u003cbr\u003e- Direct Outputs - All mono inputs provide direct outputs for direct routing to recorders, mixers, etc.\u003cbr\u003e- GB30 Microphone Preamplifiers - Soundcraft's GB30 microphone preamplifier's provide an ultra low-noise floor while maintaining high output gain.\u003cbr\u003e- Integrated Meterbridge - The GB8 series features an integrated LED and VU meter bridge for accurate metering of input and output level.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"}